[U-Boot] [PATCH v3 2/4] board: evb-rk3399: add api to support dwc3 gadget

[Marek Vasut]

On 08/31/2016 10:40 AM, Kever Yang wrote:
> This patch add board_usb_init() and interrupt callback
> for dwc3 gadget.
> 
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
> ---
> 
> Changes in v3:
> - remove utmi width DT parse from borad init

OK

> Changes in v2:
> - parse dt for utmi width
> 
>  board/rockchip/evb_rk3399/evb-rk3399.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/board/rockchip/evb_rk3399/evb-rk3399.c b/board/rockchip/evb_rk3399/evb-rk3399.c
> index d394276..0d39902 100644
> --- a/board/rockchip/evb_rk3399/evb-rk3399.c
> +++ b/board/rockchip/evb_rk3399/evb-rk3399.c
> @@ -7,6 +7,8 @@
>  #include <dm.h>
>  #include <dm/pinctrl.h>
>  #include <asm/arch/periph.h>
> +#include <usb.h>
> +#include <dwc3-uboot.h>
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> @@ -54,3 +56,24 @@ void dram_init_banksize(void)
>  	gd->bd->bi_dram[0].start = 0x200000;
>  	gd->bd->bi_dram[0].size = 0x80000000;
>  }
> +
> +#ifdef CONFIG_USB_DWC3
> +static struct dwc3_device dwc3_device_data = {
> +	.maximum_speed = USB_SPEED_HIGH,
> +	.base = 0xfe800000,
> +	.dr_mode = USB_DR_MODE_PERIPHERAL,
> +	.index = 0,
> +	.dis_u2_susphy_quirk = 1,
> +};

Uh, didn't I complain last time that this should come from DT
and not platdata ?

> +int usb_gadget_handle_interrupts(void)
> +{
> +	dwc3_uboot_handle_interrupt(0);
> +	return 0;
> +}
> +
> +int board_usb_init(int index, enum usb_init_type init)
> +{
> +	return dwc3_uboot_init(&dwc3_device_data);
> +}
> +#endif
> 


-- 
Best regards,
Marek Vasut