[U-Boot] [PATCH 13/13] board: am33xx-hs: spl: Allow post-processing of FIT image on AM33xx

[Andrew F. Davis]

When CONFIG_FIT_IMAGE_POST_PROCESS or CONFIG_SPL_FIT_IMAGE_POST_PROCESS
is enabled board_fit_image_post_process will be called, add this
function to am33xx boards when CONFIG_TI_SECURE_DEVICE is set to
verify the loaded image.

Signed-off-by: Andrew F. Davis <afd at ti.com>
---
 board/ti/am335x/board.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 56f4984..0ed16ca 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -25,6 +25,7 @@
 #include <asm/io.h>
 #include <asm/emif.h>
 #include <asm/gpio.h>
+#include <asm/omap_sec_common.h>
 #include <i2c.h>
 #include <miiphy.h>
 #include <cpsw.h>
@@ -775,3 +776,10 @@ int board_fit_config_name_match(const char *name)
 		return -1;
 }
 #endif
+
+#ifdef CONFIG_TI_SECURE_DEVICE
+void board_fit_image_post_process(void **p_image, size_t *p_size)
+{
+	secure_boot_verify_image(p_image, p_size);
+}
+#endif
-- 
2.9.2