[U-Boot] [PATCH 2/3] mx7dsabresd: Directly write to register LDOGCTL
Fabio Estevam
fabio.estevam at nxp.com
Wed Aug 17 14:46:23 CEST 2016
Register LDOGCTL contains only bit 0 as a valid bit, so there is no need
to do a read-modify-write operation.
Simplify the code by writing directly to this register.
Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
board/freescale/mx7dsabresd/mx7dsabresd.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c
index 3098e1a..b936544 100644
--- a/board/freescale/mx7dsabresd/mx7dsabresd.c
+++ b/board/freescale/mx7dsabresd/mx7dsabresd.c
@@ -578,9 +578,7 @@ int power_init_board(void)
printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id);
/* disable Low Power Mode during standby mode */
- pmic_reg_read(p, PFUZE3000_LDOGCTL, ®);
- reg |= 0x1;
- pmic_reg_write(p, PFUZE3000_LDOGCTL, reg);
+ pmic_reg_write(p, PFUZE3000_LDOGCTL, 0x1);
return 0;
}
--
1.9.1
More information about the U-Boot
mailing list