[U-Boot] [PATCH v2 4/4] config: rk3399: add support for dwc3 gadget

Steve Rae steve.rae at raedomain.com
Sun Aug 28 00:22:59 CEST 2016


Hi Kever,

On Aug 23, 2016 20:48, "Kever Yang" <kever.yang at rock-chips.com> wrote:
>
> To support fastboot, we need to enable the controller first.
> rk3399 is using dwc3 as usb device controller, this patch enable
> the configs for dwc3 gadget.
>
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
> Reviewed-by: Simon Glass <sjg at chromium.org>
> ---
>
> Changes in v2:
> - remove config for USB2PHY UTMI BITS
>
>  include/configs/rk3399_common.h | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>
> diff --git a/include/configs/rk3399_common.h
b/include/configs/rk3399_common.h
> index 6875308..fcd1700 100644
> --- a/include/configs/rk3399_common.h
> +++ b/include/configs/rk3399_common.h
> @@ -27,6 +27,26 @@
>
>  #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* 64M */
>
> +/*  usb device */
> +#define CONFIG_USB_DWC3
> +#define CONFIG_USB_DWC3_GADGET
> +#define CONFIG_USB_GADGET
> +#define CONFIG_USB_GADGET_DUALSPEED
> +#define CONFIG_USB_GADGET_VBUS_DRAW    0
> +
> +/*  fastboot  */
> +#define CONFIG_CMD_FASTBOOT
> +#define CONFIG_USB_FUNCTION_FASTBOOT
> +#define CONFIG_FASTBOOT_FLASH
> +#define CONFIG_FASTBOOT_FLASH_MMC_DEV  1       /* eMMC */
> +#define CONFIG_FASTBOOT_BUF_ADDR       CONFIG_SYS_LOAD_ADDR
> +#define CONFIG_FASTBOOT_BUF_SIZE       0x08000000
> +
> +#define CONFIG_USB_GADGET_DOWNLOAD
> +#define CONFIG_G_DNL_MANUFACTURER      "Rockchip"
> +#define CONFIG_G_DNL_VENDOR_NUM                0x2207
> +#define CONFIG_G_DNL_PRODUCT_NUM       0x330a
> +
FYI - All of these new defines are now in Kconfig....
Thanks, Steve

>  /* MMC/SD IP block */
>  #define CONFIG_MMC
>  #define CONFIG_GENERIC_MMC
> --
> 1.9.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot


More information about the U-Boot mailing list