[U-Boot] [PATCH v2 4/4] config: rk3399: add support for dwc3 gadget

[Kever Yang]

To support fastboot, we need to enable the controller first.
rk3399 is using dwc3 as usb device controller, this patch enable
the configs for dwc3 gadget.

Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---

Changes in v2:
- remove config for USB2PHY UTMI BITS

 include/configs/rk3399_common.h | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h
index 6875308..fcd1700 100644
--- a/include/configs/rk3399_common.h
+++ b/include/configs/rk3399_common.h
@@ -27,6 +27,26 @@
 
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* 64M */
 
+/*  usb device */
+#define CONFIG_USB_DWC3
+#define CONFIG_USB_DWC3_GADGET
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW	0
+
+/*  fastboot  */
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_USB_FUNCTION_FASTBOOT
+#define CONFIG_FASTBOOT_FLASH
+#define CONFIG_FASTBOOT_FLASH_MMC_DEV	1	/* eMMC */
+#define CONFIG_FASTBOOT_BUF_ADDR	CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE	0x08000000
+
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_G_DNL_MANUFACTURER	"Rockchip"
+#define CONFIG_G_DNL_VENDOR_NUM		0x2207
+#define CONFIG_G_DNL_PRODUCT_NUM	0x330a
+
 /* MMC/SD IP block */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
-- 
1.9.1