[U-Boot] [PATCH 10/21] imx: mx6ull: adjust POR_B setting for i.MX6ULL

[Peng Fan]

Adjust POR_B settings on i.MX6ULL according to IC design
team's suggestion:

2'b00 :  always PUP100K
2'b01 :  PUP100K when PMIC_ON_REQ || SOC_NOT_FAIL
2'b10 :  always disable PUP100K
2'b11 :  PDN100K when SOC_FAIL, PUP100K when SOC_NOT_FAIL -- recommended setting

Signed-off-by: Peng Fan <peng.fan at nxp.com>
Signed-off-by: Anson Huang <Anson.Huang at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 arch/arm/cpu/armv7/mx6/soc.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index f062d86..c552512 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -366,6 +366,20 @@ int arch_cpu_init(void)
 		writel(0x0000b8a0, IOMUXC_BASE_ADDR + 0x29c);
 	}
 
+	if (is_mx6ull()) {
+		/*
+		 * GPBIT[1:0] is suggested to set to 2'b11:
+		 * 2'b00 : always PUP100K
+		 * 2'b01 : PUP100K when PMIC_ON_REQ or SOC_NOT_FAIL
+		 * 2'b10 : always disable PUP100K
+		 * 2'b11 : PDN100K when SOC_FAIL, PUP100K when SOC_NOT_FAIL
+		 * register offset is different from i.MX6UL, since
+		 * i.MX6UL is fixed by ECO.
+		 */
+		writel(readl(MX6UL_SNVS_LP_BASE_ADDR) |
+			0x3, MX6UL_SNVS_LP_BASE_ADDR);
+	}
+
 	/* Set perclk to source from OSC 24MHz */
 #if defined(CONFIG_MX6SL)
 	set_preclk_from_osc();
-- 
2.6.2