[U-Boot] [PATCH] TI: Rework SRAM definitions and maximums
Lokesh Vutla
lokeshvutla at ti.com
Sat Aug 27 13:59:44 CEST 2016
On Friday 26 August 2016 11:00 PM, Tom Rini wrote:
> On all TI platforms the ROM defines a "downloaded image" area at or near
> the start of SRAM which is followed by a reserved area. As it is at
> best bad form and at worst possibly harmful in corner cases to write in
> this reserved area, we stop doing that by adding in the define
> NON_SECURE_SRAM_IMG_END to say where the end of the downloaded image
> area is and make SRAM_SCRATCH_SPACE_ADDR be one kilobyte before this.
> At current we define the end of scratch space at 0x228 bytes past the
> start of scratch space this this gives us a lot of room to grow. As
> these scratch uses are non-optional today, all targets are modified to
> respect this boundary.
>
> Tested on OMAP4 Pandaboard, OMAP3 Beagle xM
Verified on AM437x-GP EVM.
Tested-by: Lokesh Vutla <lokeshvutla at ti.com>
Acked-by: Lokesh Vutla <lokeshvutla at ti.com>
Thanks and regards,
Lokesh
>
> Cc: Albert Aribaud <albert.u.boot at aribaud.net>
> Cc: Nagendra T S <nagendra at mistralsolutions.com>
> Cc: Vaibhav Hiremath <hvaibhav at ti.com>
> Cc: Lokesh Vutla <lokeshvutla at ti.com>
> Cc: Felipe Balbi <balbi at ti.com>
> Cc: Igor Grinberg <grinberg at compulab.co.il>
> Cc: Nikita Kiryanov <nikita at compulab.co.il>
> Cc: Paul Kocialkowski <contact at paulk.fr>
> Cc: Enric Balletbo i Serra <eballetbo at gmail.com>
> Cc: Adam Ford <aford173 at gmail.com>
> Cc: Steve Sakoman <sakoman at gmail.com>
> Cc: Stefan Roese <sr at denx.de>
> Cc: Thomas Weber <weber at corscience.de>
> Cc: Hannes Schmelzer <oe5hpm at oevsv.at>
> Cc: Thomas Chou <thomas at wytron.com.tw>
> Cc: Masahiro Yamada <yamada.masahiro at socionext.com>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Joe Hershberger <joe.hershberger at ni.com>
> Cc: Sam Protsenko <semen.protsenko at linaro.org>
> Cc: Heiko Schocher <hs at denx.de>
> Cc: Samuel Egli <samuel.egli at siemens.com>
> Cc: Michal Simek <michal.simek at xilinx.com>
> Cc: Wolfgang Denk <wd at denx.de>
> Cc: Mateusz Kulikowski <mateusz.kulikowski at gmail.com>
> Cc: Ben Whitten <ben.whitten at gmail.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Bin Meng <bmeng.cn at gmail.com>
> Cc: Sekhar Nori <nsekhar at ti.com>
> Cc: Mugunthan V N <mugunthanvnm at ti.com>
> Cc: "B, Ravi" <ravibabu at ti.com>
> Cc: "Matwey V. Kornilov" <matwey.kornilov at gmail.com>
> Cc: Ladislav Michl <ladis at linux-mips.org>
> Cc: Ash Charles <ashcharles at gmail.com>
> Cc: "Kipisz, Steven" <s-kipisz2 at ti.com>
> Cc: Daniel Allred <d-allred at ti.com>
> Signed-off-by: Tom Rini <trini at konsulko.com>
> ---
> arch/arm/include/asm/arch-am33xx/omap.h | 13 ++++++-------
> arch/arm/include/asm/arch-omap3/omap.h | 5 ++++-
> arch/arm/include/asm/arch-omap4/omap.h | 5 ++++-
> arch/arm/include/asm/arch-omap5/omap.h | 6 +++++-
> include/configs/am3517_crane.h | 3 ++-
> include/configs/am3517_evm.h | 3 ++-
> include/configs/am43xx_evm.h | 3 ---
> include/configs/am57xx_evm.h | 2 --
> include/configs/bur_am335x_common.h | 6 ++++--
> include/configs/cm_t35.h | 3 ++-
> include/configs/cm_t43.h | 1 -
> include/configs/dra7xx_evm.h | 2 --
> include/configs/kc1.h | 3 ++-
> include/configs/omap3_evm.h | 3 ++-
> include/configs/omap3_igep00x0.h | 8 ++++----
> include/configs/omap3_logic.h | 10 ++++++----
> include/configs/omap3_overo.h | 8 +++++---
> include/configs/siemens-am33x-common.h | 3 ++-
> include/configs/sniper.h | 3 ++-
> include/configs/tam3517-common.h | 3 ++-
> include/configs/tao3530.h | 3 ++-
> include/configs/ti814x_evm.h | 3 ++-
> include/configs/ti816x_evm.h | 3 ++-
> include/configs/ti_am335x_common.h | 1 -
> include/configs/ti_armv7_common.h | 21 +++++++++++++--------
> include/configs/ti_omap3_common.h | 1 -
> include/configs/ti_omap4_common.h | 1 -
> include/configs/ti_omap5_common.h | 7 -------
> include/configs/tricorder.h | 3 ++-
> 29 files changed, 75 insertions(+), 61 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h
> index 47962dadf59c..3293caaca4ab 100644
> --- a/arch/arm/include/asm/arch-am33xx/omap.h
> +++ b/arch/arm/include/asm/arch-am33xx/omap.h
> @@ -15,24 +15,23 @@
> #ifndef _OMAP_H_
> #define _OMAP_H_
>
> +#include <linux/sizes.h>
> +
> #ifdef CONFIG_AM33XX
> #define NON_SECURE_SRAM_START 0x402F0400
> #define NON_SECURE_SRAM_END 0x40310000
> -#define SRAM_SCRATCH_SPACE_ADDR 0x4030B800
> +#define NON_SECURE_SRAM_IMG_END 0x4030B800
> #elif defined(CONFIG_TI81XX)
> #define NON_SECURE_SRAM_START 0x40300000
> #define NON_SECURE_SRAM_END 0x40320000
> -#define SRAM_SCRATCH_SPACE_ADDR 0x4031B800
> +#define NON_SECURE_SRAM_IMG_END 0x4031B800
> #elif defined(CONFIG_AM43XX)
> #define NON_SECURE_SRAM_START 0x402F0400
> #define NON_SECURE_SRAM_END 0x40340000
> -#define SRAM_SCRATCH_SPACE_ADDR 0x40337C00
> -#define AM4372_BOARD_NAME_START SRAM_SCRATCH_SPACE_ADDR
> -#define AM4372_BOARD_NAME_END SRAM_SCRATCH_SPACE_ADDR + 0xC
> -#define AM4372_BOARD_VERSION_START SRAM_SCRATCH_SPACE_ADDR + 0xD
> -#define AM4372_BOARD_VERSION_END SRAM_SCRATCH_SPACE_ADDR + 0x14
> +#define NON_SECURE_SRAM_IMG_END 0x40337DE0
> #define QSPI_BASE 0x47900000
> #endif
> +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
>
> /* Boot parameters */
> #ifndef __ASSEMBLY__
> diff --git a/arch/arm/include/asm/arch-omap3/omap.h b/arch/arm/include/asm/arch-omap3/omap.h
> index bc0e02a200cb..417ff895f19e 100644
> --- a/arch/arm/include/asm/arch-omap3/omap.h
> +++ b/arch/arm/include/asm/arch-omap3/omap.h
> @@ -10,6 +10,8 @@
> #ifndef _OMAP3_H_
> #define _OMAP3_H_
>
> +#include <linux/sizes.h>
> +
> /* Stuff on L3 Interconnect */
> #define SMX_APE_BASE 0x68000000
>
> @@ -145,7 +147,8 @@ struct gpio {
>
> #define NON_SECURE_SRAM_START 0x40208000 /* Works for GP & EMU */
> #define NON_SECURE_SRAM_END 0x40210000
> -#define SRAM_SCRATCH_SPACE_ADDR 0x4020E000
> +#define NON_SECURE_SRAM_IMG_END 0x4020F000
> +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
>
> #define LOW_LEVEL_SRAM_STACK 0x4020FFFC
>
> diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
> index 5ccda6ee94ce..b86a7768401c 100644
> --- a/arch/arm/include/asm/arch-omap4/omap.h
> +++ b/arch/arm/include/asm/arch-omap4/omap.h
> @@ -19,6 +19,8 @@
> #include <asm/types.h>
> #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
>
> +#include <linux/sizes.h>
> +
> /*
> * L4 Peripherals - L4 Wakeup and L4 Core now
> */
> @@ -109,7 +111,8 @@ struct s32ktimer {
> */
> #define NON_SECURE_SRAM_START 0x40304000
> #define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */
> -#define SRAM_SCRATCH_SPACE_ADDR 0x4030C000
> +#define NON_SECURE_SRAM_IMG_END 0x4030C000
> +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
> /* base address for indirect vectors (internal boot mode) */
> #define SRAM_ROM_VECT_BASE 0x4030D000
>
> diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
> index 2fd5cda6238f..ef8e9752450e 100644
> --- a/arch/arm/include/asm/arch-omap5/omap.h
> +++ b/arch/arm/include/asm/arch-omap5/omap.h
> @@ -16,6 +16,8 @@
> #include <asm/types.h>
> #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
>
> +#include <linux/sizes.h>
> +
> /*
> * L4 Peripherals - L4 Wakeup and L4 Core now
> */
> @@ -186,11 +188,13 @@ struct s32ktimer {
> #if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
> #define NON_SECURE_SRAM_START 0x40300000
> #define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */
> +#define NON_SECURE_SRAM_IMG_END 0x4037E000
> #else
> #define NON_SECURE_SRAM_START 0x40300000
> #define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */
> +#define NON_SECURE_SRAM_IMG_END 0x4031E000
> #endif
> -#define SRAM_SCRATCH_SPACE_ADDR 0x4031E000
> +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
>
> /* base address for indirect vectors (internal boot mode) */
> #define SRAM_ROM_VECT_BASE 0x4031F000
> diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
> index a65d1a884b01..7855e88c6922 100644
> --- a/include/configs/am3517_crane.h
> +++ b/include/configs/am3517_crane.h
> @@ -279,7 +279,8 @@
> #define CONFIG_SPL_BOARD_INIT
> #define CONFIG_SPL_NAND_SIMPLE
> #define CONFIG_SPL_TEXT_BASE 0x40200800
> -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
> +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
> + CONFIG_SPL_TEXT_BASE)
>
> #define CONFIG_SPL_BSS_START_ADDR 0x80000000
> #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
> diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
> index 4d88aac63750..b0779c387cab 100644
> --- a/include/configs/am3517_evm.h
> +++ b/include/configs/am3517_evm.h
> @@ -337,7 +337,8 @@
> #define CONFIG_SPL_BOARD_INIT
> #define CONFIG_SPL_NAND_SIMPLE
> #define CONFIG_SPL_TEXT_BASE 0x40200000
> -#define CONFIG_SPL_MAX_SIZE (64 * 1024)
> +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
> + CONFIG_SPL_TEXT_BASE)
>
> #define CONFIG_SPL_BSS_START_ADDR 0x80000000
> #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
> diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
> index 0467953566c6..4ce133e46ee5 100644
> --- a/include/configs/am43xx_evm.h
> +++ b/include/configs/am43xx_evm.h
> @@ -38,9 +38,6 @@
>
> /* SPL defines. */
> #define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR
> -#define CONFIG_SPL_MAX_SIZE (NON_SECURE_SRAM_END - \
> - CONFIG_PUB_ROM_DATA_SIZE - \
> - CONFIG_SPL_TEXT_BASE)
> #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
> (128 << 20))
> #define CONFIG_SPL_POWER_SUPPORT
> diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
> index 46e8d4cfd715..cf74dbe740ab 100644
> --- a/include/configs/am57xx_evm.h
> +++ b/include/configs/am57xx_evm.h
> @@ -102,8 +102,6 @@
> #ifdef CONFIG_SPL_BUILD
> #undef CONFIG_DM_SPI
> #undef CONFIG_DM_SPI_FLASH
> -#undef CONFIG_SPL_MAX_SIZE
> -#define CONFIG_SPL_MAX_SIZE (256 << 10) /* 256 KiB */
> #endif
>
> /* SPI SPL */
> diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
> index a94b1e271155..a6a4f0c94384 100644
> --- a/include/configs/bur_am335x_common.h
> +++ b/include/configs/bur_am335x_common.h
> @@ -47,10 +47,12 @@
> * area between 0x402F0400 and 0x4030B800 as a download area and
> * 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also
> * supports X-MODEM loading via UART, and we leverage this and then use
> - * Y-MODEM to load u-boot.img, when booted over UART.
> + * Y-MODEM to load u-boot.img, when booted over UART. We must also include
> + * the scratch space that U-Boot uses in SRAM.
> */
> #define CONFIG_SPL_TEXT_BASE 0x402F0400
> -#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE)
> +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
> + CONFIG_SPL_TEXT_BASE)
>
> /*
> * Since SPL did pll and ddr initialization for us,
> diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
> index 03dc3cc0d919..5d717a4a5284 100644
> --- a/include/configs/cm_t35.h
> +++ b/include/configs/cm_t35.h
> @@ -344,7 +344,8 @@
> #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
>
> #define CONFIG_SPL_TEXT_BASE 0x40200800
> -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
> +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
> + CONFIG_SPL_TEXT_BASE)
>
> /*
> * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
> diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
> index 5d94f133cba9..a0f981625a7d 100644
> --- a/include/configs/cm_t43.h
> +++ b/include/configs/cm_t43.h
> @@ -154,7 +154,6 @@
>
> /* SPL defines. */
> #define CONFIG_SPL_TEXT_BASE 0x40300350
> -#define CONFIG_SPL_MAX_SIZE (64 * 1024)
> #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20))
> #define CONFIG_SPL_POWER_SUPPORT
> #define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024)
> diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
> index b66949f4155b..ed1ee5453fbb 100644
> --- a/include/configs/dra7xx_evm.h
> +++ b/include/configs/dra7xx_evm.h
> @@ -185,8 +185,6 @@
> /* In SPL, use the environment and discard MMC support for space. */
> #ifdef CONFIG_SPL_BUILD
> #undef CONFIG_SPL_MMC_SUPPORT
> -#undef CONFIG_SPL_MAX_SIZE
> -#define CONFIG_SPL_MAX_SIZE (64 << 10) /* 64 KiB */
> #endif
> #define CONFIG_SPL_ENV_SUPPORT
> #define CONFIG_ENV_IS_IN_SPI_FLASH
> diff --git a/include/configs/kc1.h b/include/configs/kc1.h
> index b08cf2161db7..b30aca6047cd 100644
> --- a/include/configs/kc1.h
> +++ b/include/configs/kc1.h
> @@ -120,7 +120,8 @@
> #define CONFIG_SPL_FRAMEWORK
>
> #define CONFIG_SPL_TEXT_BASE 0x40300000
> -#define CONFIG_SPL_MAX_SIZE (48 * 1024)
> +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
> + CONFIG_SPL_TEXT_BASE)
> #define CONFIG_SPL_BSS_START_ADDR 0x80000000
> #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024)
> #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
> diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
> index 52a24d37b882..83af42686c8c 100644
> --- a/include/configs/omap3_evm.h
> +++ b/include/configs/omap3_evm.h
> @@ -345,7 +345,8 @@
> /* Defines for SPL */
> #define CONFIG_SPL_FRAMEWORK
> #define CONFIG_SPL_TEXT_BASE 0x40200800
> -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
> +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
> + CONFIG_SPL_TEXT_BASE)
>
> #define CONFIG_SPL_BSS_START_ADDR 0x80000000
> #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
> diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
> index e0d25937f735..3389bf316472 100644
> --- a/include/configs/omap3_igep00x0.h
> +++ b/include/configs/omap3_igep00x0.h
> @@ -16,11 +16,11 @@
> #include <configs/ti_omap3_common.h>
> #include <asm/mach-types.h>
>
> -/* SRAM starts at 0x40200000 and ends at 0x4020FFFF (64KB) */
> -#undef CONFIG_SPL_MAX_SIZE
> +/*
> + * We are only ever GP parts and will utilize all of the "downloaded image"
> + * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
> + */
> #undef CONFIG_SPL_TEXT_BASE
> -
> -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE)
> #define CONFIG_SPL_TEXT_BASE 0x40200000
>
> /*
> diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
> index 49a8b3f5ef43..2ed89efa0ba5 100644
> --- a/include/configs/omap3_logic.h
> +++ b/include/configs/omap3_logic.h
> @@ -30,11 +30,13 @@
>
> #include <configs/ti_omap3_common.h>
>
> -/* Override default SPL info to minimize empty space and allow BCH8 in SPL */
> +/*
> + * We are only ever GP parts and will utilize all of the "downloaded image"
> + * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in
> + * order to allow for BCH8 to fit in.
> + */
> #undef CONFIG_SPL_TEXT_BASE
> -#undef CONFIG_SPL_MAX_SIZE
> -#define CONFIG_SPL_TEXT_BASE 0x40200000
> -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE)
> +#define CONFIG_SPL_TEXT_BASE 0x40200000
>
> /* Display CPU and Board information */
>
> diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
> index fbd0c2a07085..be7159bee35b 100644
> --- a/include/configs/omap3_overo.h
> +++ b/include/configs/omap3_overo.h
> @@ -11,10 +11,12 @@
> #define CONFIG_NAND
>
> #include <configs/ti_omap3_common.h>
> -#undef CONFIG_SPL_MAX_SIZE
> +/*
> + * We are only ever GP parts and will utilize all of the "downloaded image"
> + * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
> + */
> #undef CONFIG_SPL_TEXT_BASE
> -#define CONFIG_SPL_TEXT_BASE 0x40200000
> -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE)
> +#define CONFIG_SPL_TEXT_BASE 0x40200000
>
> #define CONFIG_BCH
>
> diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
> index eab665c2866b..5ca94b06d869 100644
> --- a/include/configs/siemens-am33x-common.h
> +++ b/include/configs/siemens-am33x-common.h
> @@ -126,7 +126,8 @@
> /* Defines for SPL */
> #define CONFIG_SPL_FRAMEWORK
> #define CONFIG_SPL_TEXT_BASE 0x402F0400
> -#define CONFIG_SPL_MAX_SIZE (101 * 1024)
> +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
> + CONFIG_SPL_TEXT_BASE)
>
> #define CONFIG_SPL_BSS_START_ADDR 0x80000000
> #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
> diff --git a/include/configs/sniper.h b/include/configs/sniper.h
> index fb348a5cd26e..cd303c3c201d 100644
> --- a/include/configs/sniper.h
> +++ b/include/configs/sniper.h
> @@ -128,7 +128,8 @@
> #define CONFIG_SPL_FRAMEWORK
>
> #define CONFIG_SPL_TEXT_BASE 0x40200000
> -#define CONFIG_SPL_MAX_SIZE (54 * 1024)
> +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
> + CONFIG_SPL_TEXT_BASE)
> #define CONFIG_SPL_BSS_START_ADDR 0x80000000
> #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024)
> #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
> diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
> index 73ff416aed2a..06aca6a3b3da 100644
> --- a/include/configs/tam3517-common.h
> +++ b/include/configs/tam3517-common.h
> @@ -220,7 +220,8 @@
> #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
>
> #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
> -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
> +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
> + CONFIG_SPL_TEXT_BASE)
> #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
>
> #define CONFIG_SYS_SPL_MALLOC_START 0x8f000000
> diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
> index 6616d7396e74..15243c99dd72 100644
> --- a/include/configs/tao3530.h
> +++ b/include/configs/tao3530.h
> @@ -328,7 +328,8 @@
> #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
>
> #define CONFIG_SPL_TEXT_BASE 0x40200800
> -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
> +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
> + CONFIG_SPL_TEXT_BASE)
>
> /*
> * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
> diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
> index 3c058832e176..bc9282faba55 100644
> --- a/include/configs/ti814x_evm.h
> +++ b/include/configs/ti814x_evm.h
> @@ -159,7 +159,8 @@
> /* Defines for SPL */
> #define CONFIG_SPL_FRAMEWORK
> #define CONFIG_SPL_TEXT_BASE 0x40300000
> -#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
> +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
> + CONFIG_SPL_TEXT_BASE)
>
> #define CONFIG_SPL_BSS_START_ADDR 0x80000000
> #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
> diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
> index 05fd00fd5d27..6f4926647487 100644
> --- a/include/configs/ti816x_evm.h
> +++ b/include/configs/ti816x_evm.h
> @@ -125,7 +125,8 @@
> /* Defines for SPL */
> #define CONFIG_SPL_FRAMEWORK
> #define CONFIG_SPL_TEXT_BASE 0x40400000
> -#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
> +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
> + CONFIG_SPL_TEXT_BASE)
>
> #define CONFIG_SPL_BSS_START_ADDR 0x80000000
> #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
> diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
> index bcd56fc08dc1..38be5b6e2c40 100644
> --- a/include/configs/ti_am335x_common.h
> +++ b/include/configs/ti_am335x_common.h
> @@ -59,7 +59,6 @@
> * Y-MODEM to load u-boot.img, when booted over UART.
> */
> #define CONFIG_SPL_TEXT_BASE 0x402F0400
> -#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE)
> #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
> (128 << 20))
>
> diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
> index 9f947eeb87ed..d60d213d5448 100644
> --- a/include/configs/ti_armv7_common.h
> +++ b/include/configs/ti_armv7_common.h
> @@ -212,14 +212,14 @@
> /*
> * Place the image at the start of the ROM defined image space (per
> * CONFIG_SPL_TEXT_BASE and we limit our size to the ROM-defined
> - * downloaded image area. We initalize DRAM as soon as we can so that
> - * we can place stack, malloc and BSS there. We load U-Boot itself into
> - * memory at 0x80800000 for legacy reasons (to not conflict with older
> - * SPLs). We have our BSS be placed 2MiB after this, to allow for the
> - * default Linux kernel address of 0x80008000 to work with most sized
> - * kernels, in the Falcon Mode case. We have the SPL malloc pool at the
> - * end of the BSS area. We suggest that the stack be placed at 32MiB after
> - * the start of DRAM to allow room for all of the above (handled in Kconfig).
> + * downloaded image area minus 1KiB for scratch space. We initalize DRAM as
> + * soon as we can so that we can place stack, malloc and BSS there. We load
> + * U-Boot itself into memory at 0x80800000 for legacy reasons (to not conflict
> + * with older SPLs). We have our BSS be placed 2MiB after this, to allow for
> + * the default Linux kernel address of 0x80008000 to work with most sized
> + * kernels, in the Falcon Mode case. We have the SPL malloc pool at the end
> + * of the BSS area. We suggest that the stack be placed at 32MiB after the
> + * start of DRAM to allow room for all of the above (handled in Kconfig).
> */
> #ifndef CONFIG_SYS_TEXT_BASE
> #define CONFIG_SYS_TEXT_BASE 0x80800000
> @@ -233,6 +233,11 @@
> CONFIG_SPL_BSS_MAX_SIZE)
> #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
> #endif
> +#ifndef CONFIG_SPL_MAX_SIZE
> +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
> + CONFIG_SPL_TEXT_BASE)
> +#endif
> +
>
> /* RAW SD card / eMMC locations. */
> #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
> diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h
> index 32877d1964de..843f87d93081 100644
> --- a/include/configs/ti_omap3_common.h
> +++ b/include/configs/ti_omap3_common.h
> @@ -70,7 +70,6 @@
>
> /* SPL */
> #define CONFIG_SPL_TEXT_BASE 0x40200800
> -#define CONFIG_SPL_MAX_SIZE (54 * 1024)
> #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
> #define CONFIG_SPL_POWER_SUPPORT
> #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
> diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
> index 5fad3c1242c5..34de087469fd 100644
> --- a/include/configs/ti_omap4_common.h
> +++ b/include/configs/ti_omap4_common.h
> @@ -152,7 +152,6 @@
> * So moving TEXT_BASE down to non-HS limit.
> */
> #define CONFIG_SPL_TEXT_BASE 0x40300000
> -#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE)
> #define CONFIG_SPL_DISPLAY_PRINT
> #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
> #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
> diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
> index 3589cdc3a88e..e68e23c2fddf 100644
> --- a/include/configs/ti_omap5_common.h
> +++ b/include/configs/ti_omap5_common.h
> @@ -156,13 +156,6 @@
> #define CONFIG_SPL_TEXT_BASE 0x40300000
> #endif
>
> -/* DRA7xx/AM57xx have 512K of SRAM, OMAP5 only 128K */
> -#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
> -#define TI_ROM_BOOT_LOAD_END 0x4037E000
> -#else
> -#define TI_ROM_BOOT_LOAD_END 0x4031E000
> -#endif
> -#define CONFIG_SPL_MAX_SIZE (TI_ROM_BOOT_LOAD_END - CONFIG_SPL_TEXT_BASE)
> #define CONFIG_SPL_DISPLAY_PRINT
> #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
> #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
> diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
> index 127a9689482f..d14f8f13c688 100644
> --- a/include/configs/tricorder.h
> +++ b/include/configs/tricorder.h
> @@ -340,7 +340,8 @@
> #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
>
> #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
> -#define CONFIG_SPL_MAX_SIZE (57 * 1024) /* 7 KB for stack */
> +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
> + CONFIG_SPL_TEXT_BASE)
>
> #define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/
> #define CONFIG_SPL_BSS_MAX_SIZE 0x80000
>
More information about the U-Boot
mailing list