[U-Boot] [PATCH v6 05/12] pci: Flip condition for detecting non-PCI parent devices

[Paul Burton]

In pci_uclass_pre_probe an attempt is made to detect whether the parent
of a device is a PCI device and that the device is thus a bridge. This
was being done by checking whether the parent of the device is of the
UCLASS_ROOT class. This causes problems if the PCI controller is a child
of some other non-PCI node, for example a simple-bus node.

For example, if the device tree contains something like the following
then pci_uclass_pre_probe would incorrectly believe that the PCI
controller is a bridge, with a PCI parent:

  / {
    some_child {
      compatible = "simple-bus";
      #address-cells = <1>;
      #size-cells = <1>;
      ranges = <>;

      pci_controller: pci at 10000000 {
        compatible = "my-pci-controller";
        device_type = "pci";
        reg = <0x10000000 0x2000000>;
      };
    };
  };

Avoid this incorrect detection of bridges by instead checking whether
the parent devices class is UCLASS_PCI and treating a device as a bridge
when this is true, making use of device_is_on_pci_bus to perform this
test.

Signed-off-by: Paul Burton <paul.burton at imgtec.com>
Reviewed-by: Simon Glass <sjg at chromium.org>

---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- Use device_is_on_pci_bus instead of effectively open-coding it

 drivers/pci/pci-uclass.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c
index 32590ce..b9b55e2 100644
--- a/drivers/pci/pci-uclass.c
+++ b/drivers/pci/pci-uclass.c
@@ -859,7 +859,7 @@ static int pci_uclass_pre_probe(struct udevice *bus)
 	hose = bus->uclass_priv;
 
 	/* For bridges, use the top-level PCI controller */
-	if (device_get_uclass_id(bus->parent) == UCLASS_ROOT) {
+	if (!device_is_on_pci_bus(bus)) {
 		hose->ctlr = bus;
 		ret = decode_regions(hose, gd->fdt_blob, bus->parent->of_offset,
 				bus->of_offset);
-- 
2.9.2