[U-Boot] [PATCH v6 04/12] pci: xilinx: Add a driver for Xilinx AXI to PCIe bridge

Paul Burton paul.burton at imgtec.com
Thu Aug 4 12:29:34 CEST 2016


This patch adds a driver for the Xilinx AXI bridge for PCI express, an
IP block which can be used on some generations of Xilinx FPGAs. This is
mostly a case of implementing PCIe ECAM specification, but with some
quirks about what devices are valid to access.

Signed-off-by: Paul Burton <paul.burton at imgtec.com>
Reviewed-by: Simon Glass <sjg at chromium.org>

---

Changes in v6:
- Use map_physmem instead of ioremap_nocache

Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- Clean up error returns & documentation

 drivers/pci/Kconfig       |   7 ++
 drivers/pci/Makefile      |   1 +
 drivers/pci/pcie_xilinx.c | 220 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 228 insertions(+)
 create mode 100644 drivers/pci/pcie_xilinx.c

diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 26aa2b0..1f9ea66 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -38,4 +38,11 @@ config PCI_TEGRA
 	  with a total of 5 lanes. Some boards require this for Ethernet
 	  support to work (e.g. beaver, jetson-tk1).
 
+config PCI_XILINX
+	bool "Xilinx AXI Bridge for PCI Express"
+	depends on DM_PCI
+	help
+	  Enable support for the Xilinx AXI bridge for PCI express, an IP block
+	  which can be used on some generations of Xilinx FPGAs.
+
 endmenu
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index f8be9bf..9583e91 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -31,3 +31,4 @@ obj-$(CONFIG_PCI_TEGRA) += pci_tegra.o
 obj-$(CONFIG_TSI108_PCI) += tsi108_pci.o
 obj-$(CONFIG_WINBOND_83C553) += w83c553f.o
 obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape.o
+obj-$(CONFIG_PCI_XILINX) += pcie_xilinx.o
diff --git a/drivers/pci/pcie_xilinx.c b/drivers/pci/pcie_xilinx.c
new file mode 100644
index 0000000..5216001
--- /dev/null
+++ b/drivers/pci/pcie_xilinx.c
@@ -0,0 +1,220 @@
+/*
+ * Xilinx AXI Bridge for PCI Express Driver
+ *
+ * Copyright (C) 2016 Imagination Technologies
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <pci.h>
+
+#include <asm/io.h>
+
+/**
+ * struct xilinx_pcie - Xilinx PCIe controller state
+ * @hose: The parent classes PCI controller state
+ * @cfg_base: The base address of memory mapped configuration space
+ */
+struct xilinx_pcie {
+	struct pci_controller hose;
+	void *cfg_base;
+};
+
+/* Register definitions */
+#define XILINX_PCIE_REG_PSCR		0x144
+#define XILINX_PCIE_REG_PSCR_LNKUP	BIT(11)
+
+/**
+ * pcie_xilinx_link_up() - Check whether the PCIe link is up
+ * @pcie: Pointer to the PCI controller state
+ *
+ * Checks whether the PCIe link for the given device is up or down.
+ *
+ * Return: true if the link is up, else false
+ */
+static bool pcie_xilinx_link_up(struct xilinx_pcie *pcie)
+{
+	uint32_t pscr = __raw_readl(pcie->cfg_base + XILINX_PCIE_REG_PSCR);
+
+	return pscr & XILINX_PCIE_REG_PSCR_LNKUP;
+}
+
+/**
+ * pcie_xilinx_config_address() - Calculate the address of a config access
+ * @pcie: Pointer to the PCI controller state
+ * @bdf: Identifies the PCIe device to access
+ * @offset: The offset into the device's configuration space
+ * @paddress: Pointer to the pointer to write the calculates address to
+ *
+ * Calculates the address that should be accessed to perform a PCIe
+ * configuration space access for a given device identified by the PCIe
+ * controller device @pcie and the bus, device & function numbers in @bdf. If
+ * access to the device is not valid then the function will return an error
+ * code. Otherwise the address to access will be written to the pointer pointed
+ * to by @paddress.
+ *
+ * Return: 0 on success, else -ENODEV
+ */
+static int pcie_xilinx_config_address(struct xilinx_pcie *pcie, pci_dev_t bdf,
+				      uint offset, void **paddress)
+{
+	unsigned int bus = PCI_BUS(bdf);
+	unsigned int dev = PCI_DEV(bdf);
+	unsigned int func = PCI_FUNC(bdf);
+	void *addr;
+
+	if ((bus > 0) && !pcie_xilinx_link_up(pcie))
+		return -ENODEV;
+
+	/*
+	 * Busses 0 (host-PCIe bridge) & 1 (its immediate child) are
+	 * limited to a single device each.
+	 */
+	if ((bus < 2) && (dev > 0))
+		return -ENODEV;
+
+	addr = pcie->cfg_base;
+	addr += bus << 20;
+	addr += dev << 15;
+	addr += func << 12;
+	addr += offset;
+	*paddress = addr;
+
+	return 0;
+}
+
+/**
+ * pcie_xilinx_read_config() - Read from configuration space
+ * @pcie: Pointer to the PCI controller state
+ * @bdf: Identifies the PCIe device to access
+ * @offset: The offset into the device's configuration space
+ * @valuep: A pointer at which to store the read value
+ * @size: Indicates the size of access to perform
+ *
+ * Read a value of size @size from offset @offset within the configuration
+ * space of the device identified by the bus, device & function numbers in @bdf
+ * on the PCI bus @bus.
+ *
+ * Return: 0 on success, else -ENODEV or -EINVAL
+ */
+static int pcie_xilinx_read_config(struct udevice *bus, pci_dev_t bdf,
+				   uint offset, ulong *valuep,
+				   enum pci_size_t size)
+{
+	struct xilinx_pcie *pcie = dev_get_priv(bus);
+	void *address;
+	int err;
+
+	err = pcie_xilinx_config_address(pcie, bdf, offset, &address);
+	if (err < 0) {
+		*valuep = pci_get_ff(size);
+		return 0;
+	}
+
+	switch (size) {
+	case PCI_SIZE_8:
+		*valuep = __raw_readb(address);
+		return 0;
+	case PCI_SIZE_16:
+		*valuep = __raw_readw(address);
+		return 0;
+	case PCI_SIZE_32:
+		*valuep = __raw_readl(address);
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+/**
+ * pcie_xilinx_write_config() - Write to configuration space
+ * @pcie: Pointer to the PCI controller state
+ * @bdf: Identifies the PCIe device to access
+ * @offset: The offset into the device's configuration space
+ * @value: The value to write
+ * @size: Indicates the size of access to perform
+ *
+ * Write the value @value of size @size from offset @offset within the
+ * configuration space of the device identified by the bus, device & function
+ * numbers in @bdf on the PCI bus @bus.
+ *
+ * Return: 0 on success, else -ENODEV or -EINVAL
+ */
+static int pcie_xilinx_write_config(struct udevice *bus, pci_dev_t bdf,
+				    uint offset, ulong value,
+				    enum pci_size_t size)
+{
+	struct xilinx_pcie *pcie = dev_get_priv(bus);
+	void *address;
+	int err;
+
+	err = pcie_xilinx_config_address(pcie, bdf, offset, &address);
+	if (err < 0)
+		return 0;
+
+	switch (size) {
+	case PCI_SIZE_8:
+		__raw_writeb(value, address);
+		return 0;
+	case PCI_SIZE_16:
+		__raw_writew(value, address);
+		return 0;
+	case PCI_SIZE_32:
+		__raw_writel(value, address);
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+/**
+ * pcie_xilinx_ofdata_to_platdata() - Translate from DT to device state
+ * @dev: A pointer to the device being operated on
+ *
+ * Translate relevant data from the device tree pertaining to device @dev into
+ * state that the driver will later make use of. This state is stored in the
+ * device's private data structure.
+ *
+ * Return: 0 on success, else -EINVAL
+ */
+static int pcie_xilinx_ofdata_to_platdata(struct udevice *dev)
+{
+	struct xilinx_pcie *pcie = dev_get_priv(dev);
+	struct fdt_resource reg_res;
+	DECLARE_GLOBAL_DATA_PTR;
+	int err;
+
+	err = fdt_get_resource(gd->fdt_blob, dev->of_offset, "reg",
+			       0, &reg_res);
+	if (err < 0) {
+		error("\"reg\" resource not found\n");
+		return err;
+	}
+
+	pcie->cfg_base = map_physmem(reg_res.start,
+				     fdt_resource_size(&reg_res),
+				     MAP_NOCACHE);
+
+	return 0;
+}
+
+static const struct dm_pci_ops pcie_xilinx_ops = {
+	.read_config	= pcie_xilinx_read_config,
+	.write_config	= pcie_xilinx_write_config,
+};
+
+static const struct udevice_id pcie_xilinx_ids[] = {
+	{ .compatible = "xlnx,axi-pcie-host-1.00.a" },
+	{ }
+};
+
+U_BOOT_DRIVER(pcie_xilinx) = {
+	.name			= "pcie_xilinx",
+	.id			= UCLASS_PCI,
+	.of_match		= pcie_xilinx_ids,
+	.ops			= &pcie_xilinx_ops,
+	.ofdata_to_platdata	= pcie_xilinx_ofdata_to_platdata,
+	.priv_auto_alloc_size	= sizeof(struct xilinx_pcie),
+};
-- 
2.9.2



More information about the U-Boot mailing list