[U-Boot] [PATCH 1/2 v3] x86: Add DFI BT700 BayTrail board support

[Stefan Roese]

Hi Bin,

On 12.08.2016 04:41, Bin Meng wrote:
> On Fri, Aug 12, 2016 at 9:44 AM, Bin Meng <bmeng.cn at gmail.com> wrote:
>> On Tue, Jul 19, 2016 at 1:51 PM, Stefan Roese <sr at denx.de> wrote:
>>> This patch adds support for the DFI BayTrail BT700 QSeven SoM installed
>>> on the DFI Q7X-151 baseboard. The baseboard is equipped with the Nuvoton
>>> NCT6102D Super IO chip providing the UART as console.
>>>
>>> Signed-off-by: Stefan Roese <sr at denx.de>
>>> Cc: Simon Glass <sjg at chromium.org>
>>> Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
>>> ---
>>> v3:
>>> - Change comment Winbond > Nuvoton
>>> - Remove unneeded compatible property in HS-UART DTS node
>>>
>>> v2:
>>> - Added missing text to Kconfig entry
>>>
>>>  arch/x86/Kconfig                          |   4 +
>>>  arch/x86/dts/Makefile                     |   1 +
>>>  arch/x86/dts/dfi-bt700-q7x-151.dts        |  22 +++
>>>  arch/x86/dts/dfi-bt700.dtsi               | 308 ++++++++++++++++++++++++++++++
>>>  board/dfi/Kconfig                         |  29 +++
>>>  board/dfi/dfi-bt700/Kconfig               |  28 +++
>>>  board/dfi/dfi-bt700/MAINTAINERS           |   8 +
>>>  board/dfi/dfi-bt700/Makefile              |   8 +
>>>  board/dfi/dfi-bt700/acpi/mainboard.asl    |  13 ++
>>>  board/dfi/dfi-bt700/dfi-bt700.c           |  30 +++
>>>  board/dfi/dfi-bt700/dsdt.asl              |  14 ++
>>>  board/dfi/dfi-bt700/start.S               |   9 +
>>>  configs/dfi-bt700-internal-uart_defconfig |  61 ++++++
>>>  configs/dfi-bt700-q7x-151_defconfig       |  63 ++++++
>>>  include/configs/dfi-bt700.h               |  74 +++++++
>>>  15 files changed, 672 insertions(+)
>>>  create mode 100644 arch/x86/dts/dfi-bt700-q7x-151.dts
>>>  create mode 100644 arch/x86/dts/dfi-bt700.dtsi
>>>  create mode 100644 board/dfi/Kconfig
>>>  create mode 100644 board/dfi/dfi-bt700/Kconfig
>>>  create mode 100644 board/dfi/dfi-bt700/MAINTAINERS
>>>  create mode 100644 board/dfi/dfi-bt700/Makefile
>>>  create mode 100644 board/dfi/dfi-bt700/acpi/mainboard.asl
>>>  create mode 100644 board/dfi/dfi-bt700/dfi-bt700.c
>>>  create mode 100644 board/dfi/dfi-bt700/dsdt.asl
>>>  create mode 100644 board/dfi/dfi-bt700/start.S
>>>  create mode 100644 configs/dfi-bt700-internal-uart_defconfig
>>>  create mode 100644 configs/dfi-bt700-q7x-151_defconfig
>>>  create mode 100644 include/configs/dfi-bt700.h
>>>
>>
>> applied to u-boot-x86, thanks!
>
> Unfortunately the dfi-bt700-internal-uart_defconfig does not build.
> Can you please look at this?
>
> +
> +Device Tree Source is not correctly specified.
> +Please define 'CONFIG_DEFAULT_DEVICE_TREE'
> +or build with 'DEVICE_TREE=<device_tree>' argument
> +make[2]: *** [arch/x86/dts/dfi-bt700.dtb] Error 1
> +make[1]: *** [dts/dt.dtb] Error 2
>
> Also buildman reports the following warnings:
>
> WARNING: no status info for 'theadorable-x86-dfi-bt700'
> WARNING: no maintainers for 'theadorable-x86-dfi-bt700'
> WARNING: no status info for 'dfi-bt700-internal-uart'
> WARNING: no maintainers for 'dfi-bt700-internal-uart'
>
> WARNING: no status info for 'conga-qeval20-qa3-e3845-internal-uart'
> WARNING: no maintainers for 'conga-qeval20-qa3-e3845-internal-uart'
>
> Can you please fix these too?

Sorry for the problems. I'm just back from vacation and will take
a look at it today.

Thanks,
Stefan