[U-Boot] [GIT] Pull request: u-boot-dfu

[Lukasz Majewski]

Hi Marek,

> On 08/16/2016 03:41 PM, Lukasz Majewski wrote:
> > Hi Marek,
> 
> Hi,
> 
> is that for master or next ? 

This patch _was_ supposed to go to "master"

> Was this build tested ?

Unfortunately, not so thoroughly as I thought. 

Moving dfu code to SPL causes following error on some boards:

       arm:  +   smartweb
+In file included from ../include/dfu.h:18:0,
+                 from ../common/dfu.c:16:
+../include/linux/usb/composite.h:331:9: error: requested alignment is not an integer constant
+  struct usb_device_descriptor __aligned(CONFIG_SYS_CACHELINE_SIZE) desc;
+         ^
+make[3]: *** [spl/common/dfu.o] Error 1
+make[2]: *** [spl/common] Error 2
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2


Ravi, to reproduce you need to fetch u-boot-dfu/test

and run buildman:


This is only a small subset of affected boards, so please test also "arm" (which might take long time).

./tools/buildman/buildman.py --branch=HEAD siemens --detail --verbose
--show_errors --force-build --count=5 --output-dir=./BUILD/


Thanks Marek, for pointing out.


> 
> > Please find following code for u-boot-dfu repository.
> > 
> > The following changes since commit
> > 76b2fad775ee3cb58788b11454655ba5a244ac56:
> > 
> >   eth: asix88179: Add support for the driver model (2016-08-09
> > 12:52:05 +0200)
> > 
> > are available in the git repository at:
> > 
> >   ssh://gu-dfu@git.denx.de/u-boot-dfu
> > e8091b356dd0f1e8e742a5da7a5e8256744b39b7
> > 
> > for you to fetch changes up to
> > e8091b356dd0f1e8e742a5da7a5e8256744b39b7:
> > 
> >   cmd: dfu: Add error handling for failed registration (2016-08-16
> > 13:06:04 +0200)
> > 
> > ----------------------------------------------------------------
> > B, Ravi (5):
> >       spl: dfu: add dfu support in SPL
> >       common: dfu: saperate the dfu common functionality
> >       spl: dfu: adding dfu support functions for SPL-DFU
> >       dra7x: boot: add dfu bootmode support
> >       dra7x: configs: enable SPL-DFU support
> > 
> > Sanchayan Maity (1):
> >       cmd: dfu: Add error handling for failed registration
> > 
> >  Kconfig                                      | 27
> > +++++++++++++++++++++++++++
> > arch/arm/cpu/armv7/omap-common/boot-common.c |  5 +++++
> > arch/arm/include/asm/arch-omap5/spl.h        |  2 +-
> > cmd/dfu.c                                    | 61
> > ++-----------------------------------------------------------
> > common/Makefile                              |  3 +++
> > common/dfu.c                                 | 92
> > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > common/spl/Makefile                          |  1 +
> > common/spl/spl.c                             | 10 +++++++++-
> > common/spl/spl_dfu.c                         | 57
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > include/configs/dra7xx_evm.h                 | 20
> > +++++++++++++++++++- include/configs/ti_omap5_common.h
> > |  2 -- include/g_dnl.h                              |  1 +
> > include/spl.h                                |  8 ++++++++
> > scripts/Makefile.spl                         |  4 ++++ 14 files
> > changed, 229 insertions(+), 64 deletions(-) create mode 100644
> > common/dfu.c create mode 100644 common/spl/spl_dfu.c
> > 
> > 
> > Test HW: Exynos 4412 Odroid U3, Exynos5422 Odroid XU3
> > Tested-by: Lukasz Majewski <l.majewski at samsung.com>
> > 
> > by HWT system
> > 
> 
> 



-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group