[U-Boot] [PATCH 4/4] ARM: armv7: move ARMV7_PSCI_NR_CPUS to Kconfig
Masahiro Yamada
yamada.masahiro at socionext.com
Tue Aug 30 08:56:31 CEST 2016
Move this option to Kconfig and set its default value to 4; this
increases the number of supported CPUs for some boards.
It consumes 1KB memory per CPU for PSCI stack, but it should not
be a big deal, given the amount of memory used for the modern OSes.
Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---
arch/arm/cpu/armv7/Kconfig | 5 +++++
include/configs/arndale.h | 1 -
include/configs/bcm_ep_board.h | 1 -
include/configs/jetson-tk1.h | 1 -
include/configs/ls1021aqds.h | 1 -
include/configs/ls1021atwr.h | 1 -
include/configs/mx7_common.h | 1 -
include/configs/sun6i.h | 1 -
include/configs/sun7i.h | 1 -
include/configs/sun8i.h | 12 ------------
include/configs/uniphier.h | 1 -
include/configs/vexpress_ca15_tc2.h | 1 -
12 files changed, 5 insertions(+), 22 deletions(-)
diff --git a/arch/arm/cpu/armv7/Kconfig b/arch/arm/cpu/armv7/Kconfig
index 4390f59..1f6d8c5 100644
--- a/arch/arm/cpu/armv7/Kconfig
+++ b/arch/arm/cpu/armv7/Kconfig
@@ -41,6 +41,11 @@ config ARMV7_PSCI
help
Say Y here to enable PSCI support.
+config ARMV7_PSCI_NR_CPUS
+ int "Maximum supported CPUs for PSCI"
+ depends on ARMV7_NONSEC
+ default 4
+
config ARMV7_LPAE
bool "Use LPAE page table format" if EXPERT
depends on CPU_V7
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index 18e59fc..b08f341 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -45,7 +45,6 @@
#define CONFIG_S5P_PA_SYSRAM 0x02020000
#define CONFIG_SMP_PEN_ADDR CONFIG_S5P_PA_SYSRAM
-#define CONFIG_ARMV7_PSCI_NR_CPUS 4
/* The PERIPHBASE in the CBAR register is wrong on the Arndale, so override it */
#define CONFIG_ARM_GIC_BASE_ADDRESS 0x10480000
diff --git a/include/configs/bcm_ep_board.h b/include/configs/bcm_ep_board.h
index b5e5029..4b255d8 100644
--- a/include/configs/bcm_ep_board.h
+++ b/include/configs/bcm_ep_board.h
@@ -91,6 +91,5 @@
/* Misc utility code */
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CRC32_VERIFY
-#define CONFIG_ARMV7_PSCI_NR_CPUS 4
#endif /* __BCM_EP_BOARD_H */
diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h
index 1eba74a..7c59790 100644
--- a/include/configs/jetson-tk1.h
+++ b/include/configs/jetson-tk1.h
@@ -60,7 +60,6 @@
#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"
-#define CONFIG_ARMV7_PSCI_NR_CPUS 4
/* Reserve top 1M for secure RAM */
#define CONFIG_ARMV7_SECURE_BASE 0xfff00000
#define CONFIG_ARMV7_SECURE_RESERVE_SIZE 0x00100000
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 86969a1..abbd1c4 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -10,7 +10,6 @@
#define CONFIG_LS102XA
#define CONFIG_ARMV7_PSCI_1_0
-#define CONFIG_ARMV7_PSCI_NR_CPUS CONFIG_MAX_CPUS
#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index d0fc7ff..511b0b3 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -10,7 +10,6 @@
#define CONFIG_LS102XA
#define CONFIG_ARMV7_PSCI_1_0
-#define CONFIG_ARMV7_PSCI_NR_CPUS CONFIG_MAX_CPUS
#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h
index 52c0d0f..4b1077c 100644
--- a/include/configs/mx7_common.h
+++ b/include/configs/mx7_common.h
@@ -72,7 +72,6 @@
#define CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
-#define CONFIG_ARMV7_PSCI_NR_CPUS 2
#define CONFIG_ARMV7_SECURE_BASE 0x00900000
#endif
diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h
index 41552c4..67a26c2 100644
--- a/include/configs/sun6i.h
+++ b/include/configs/sun6i.h
@@ -22,7 +22,6 @@
#define CONFIG_SUNXI_USB_PHYS 3
-#define CONFIG_ARMV7_PSCI_NR_CPUS 4
#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
#define CONFIG_ARMV7_SECURE_MAX_SIZE (64 * 1024) /* 64 KB */
diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
index 63760c5..d8e6e20 100644
--- a/include/configs/sun7i.h
+++ b/include/configs/sun7i.h
@@ -20,7 +20,6 @@
#define CONFIG_SUNXI_USB_PHYS 3
-#define CONFIG_ARMV7_PSCI_NR_CPUS 2
#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
#define CONFIG_ARMV7_SECURE_MAX_SIZE (64 * 1024) /* 64 KB */
diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h
index 151ffdc..011d70f 100644
--- a/include/configs/sun8i.h
+++ b/include/configs/sun8i.h
@@ -26,18 +26,6 @@
#define CONFIG_SUNXI_USB_PHYS 2
#endif
-#ifndef CONFIG_MACH_SUN8I_A83T
-#if defined(CONFIG_MACH_SUN8I_A23)
-#define CONFIG_ARMV7_PSCI_NR_CPUS 2
-#elif defined(CONFIG_MACH_SUN8I_A33)
-#define CONFIG_ARMV7_PSCI_NR_CPUS 4
-#elif defined(CONFIG_MACH_SUN8I_H3)
-#define CONFIG_ARMV7_PSCI_NR_CPUS 4
-#else
-#error Unsupported sun8i variant
-#endif
-#endif
-
/*
* Include common sunxi configuration where most the settings are
*/
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 66696c2..b3ca46b 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -12,7 +12,6 @@
#define __CONFIG_UNIPHIER_COMMON_H__
#define CONFIG_ARMV7_PSCI_1_0
-#define CONFIG_ARMV7_PSCI_NR_CPUS 4
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
diff --git a/include/configs/vexpress_ca15_tc2.h b/include/configs/vexpress_ca15_tc2.h
index 9583e8c..b509a9c 100644
--- a/include/configs/vexpress_ca15_tc2.h
+++ b/include/configs/vexpress_ca15_tc2.h
@@ -16,6 +16,5 @@
#define CONFIG_SYSFLAGS_ADDR 0x1c010030
#define CONFIG_SMP_PEN_ADDR CONFIG_SYSFLAGS_ADDR
-#define CONFIG_ARMV7_PSCI_NR_CPUS 4
#endif
--
1.9.1
More information about the U-Boot
mailing list