[U-Boot] [PATCH] nand: arasan_nfc: Clear ecc on bit while sending read command

[Siva Durga Prasad Paladugu]

Clear ecc ON bit while sending read command as all types
of read command(like reading spare) doesnt need ECC to be
enabled. It has been anyway taken care in other places
whereever required using arasan_nand_enable_ecc().

Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
---
 drivers/mtd/nand/arasan_nfc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mtd/nand/arasan_nfc.c b/drivers/mtd/nand/arasan_nfc.c
index 320cbaa..a26d180 100644
--- a/drivers/mtd/nand/arasan_nfc.c
+++ b/drivers/mtd/nand/arasan_nfc.c
@@ -853,6 +853,8 @@ static int arasan_nand_send_rdcmd(struct arasan_nand_command_format *curr_cmd,
 		reg_val |= (page_val << ARASAN_NAND_CMD_PG_SIZE_SHIFT);
 	}
 
+	reg_val &= ~ARASAN_NAND_CMD_ECC_ON_MASK;
+
 	reg_val &= ~ARASAN_NAND_CMD_ADDR_CYCL_MASK;
 
 	addr_cycles = arasan_nand_get_addrcycle(mtd);
-- 
2.7.4