[U-Boot] pine64 and "sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80"

[Tom Rini]

Hey guys,

I just started trying out my Pine64 1GB and mainline U-Boot and I've
found that:
commit 1a83fb4a17d959d7b037999ab7ed7e62429abe34
Author: Siarhei Siamashka <siarhei.siamashka at gmail.com>
Date:   Tue May 31 01:48:06 2016 +0300

    sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80

is breaking boot for me.  boot0 seems to run fine and then the last bit
of output that I get is:
boot0: start load other image
boot0: Loading BL3-1
Loading file 0 at address 0x40000000,size 0x00000200 success
boot0: Loading scp
Loading file 2 at address 0x00040000,size 0x0000c200 success
set arisc reset to de-assert state
Ready to disable icache.
Jump to secend Boot.
NOTICE:  BL3-1: Running in SRAM A2 (@0x44000)
NOTICE:  Configuring SPC Controller
NOTICE:  BL3-1: v1.0(debug):d697594
NOTICE:  BL3-1: Built : 09:15:57, Aug  4 2016
NOTICE:  Configuring AXP PMIC
NOTICE:  PMIC: already configured for RSB
NOTICE:  PMIC: setup successful
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9

I'm using d697594 from
https://github.com/apritzel/arm-trusted-firmware.git for ATF and
boot0.img from the 20160701 Debian "longsleep" image.  Any ideas?
Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160804/92c2c4ff/attachment.sig>