[U-Boot] [PATCH v2] arm: cache: always flush cache line size for page table

[Stefan Agner]

From: Stefan Agner <stefan.agner at toradex.com>

The page table is maintained by the CPU, hence it is safe to always
align cache flush to a whole cache line size. This allows to use
mmu_page_table_flush for a single page table, e.g. when configure
only small regions through mmu_set_region_dcache_behaviour.

Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
---
Changes since v1:
- Move cache line alignment from mmu_page_table_flush to
  mmu_set_region_dcache_behaviour

 arch/arm/lib/cache-cp15.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c
index 1121dc3..bf79edd 100644
--- a/arch/arm/lib/cache-cp15.c
+++ b/arch/arm/lib/cache-cp15.c
@@ -62,6 +62,7 @@ void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
 				     enum dcache_option option)
 {
 	u32 *page_table = (u32 *)gd->arch.tlb_addr;
+	phys_addr_t startpt, stoppt;
 	unsigned long upto, end;
 
 	end = ALIGN(start + size, MMU_SECTION_SIZE) >> MMU_SECTION_SHIFT;
@@ -70,7 +71,17 @@ void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
 	      option);
 	for (upto = start; upto < end; upto++)
 		set_section_dcache(upto, option);
-	mmu_page_table_flush((u32)&page_table[start], (u32)&page_table[end]);
+
+	/*
+	 * Make sure range is cache line aligned
+	 * Only CPU maintains page tables, hence it is save to always
+	 * flush complete cache lines...
+	 */
+	startpt = (phys_addr_t)&page_table[start];
+	startpt &= ~(CONFIG_SYS_CACHELINE_SIZE - 1);
+	stoppt = (phys_addr_t)&page_table[end];
+	stoppt = ALIGN(stoppt, CONFIG_SYS_CACHELINE_SIZE);
+	mmu_page_table_flush(startpt, stoppt);
 }
 
 __weak void dram_bank_mmu_setup(int bank)
-- 
2.9.0