[U-Boot] Help Falcon Mode on Wanboard

[Diego Dorta]

Hi Stefano,

I downloaded the patch about Falcon Mode from:

https://www.amazon.com/clouddrive/share/hVlzRXoJv1Jq4DJdgDcVnfmOWjARqR06eCfheWjRcSh/folder/KZakgsCMThWy3I43j2-afQ

Then, as the README file says I did a checkout on commit 587c3f8ebe356b558f1876414885c1b4a31294ab and applied the patch.

$ git am 0001-wandboard-changes-for-EW-2016-demo.patch

I compiled without errors and then I've tried to upload to the SD card, by doing:

$ sudo dd if=SPL of=/dev/sdb bs=1k seek=1; sync

$ sudo dd if=u-boot.img of=/dev/sdb bs=1k seek=69; sync

But, everytime I try to turn on the board I got this error:

U-Boot 2016.01-rc4-26067-g0ff7f76 (Aug 08 2016 - 09:41:44 -0300)

CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
initcall sequence 178290cc failed at call 178038bd (err=394279101)
### ERROR ### Please RESET the board ###

I'm using wanboard quad rev: B1.

Does anybody know how to solve this?

Regards,
Diego Dorta