[U-Boot] [PATCH v1 1/4] usb: host: ehci-vf: Migrate Vybrid USB to driver model

Lukasz Majewski l.majewski at samsung.com
Tue Aug 9 15:25:50 CEST 2016


Hi maitysanchayan at gmail.com,

> Hello,
> 
> On 16-08-08 18:56:21, maitysanchayan at gmail.com wrote:
> > Hello,
> > 
> > Adding Lukasz's second mail ID to cc
> > 
> > On 16-08-08 11:45:35, maitysanchayan at gmail.com wrote:
> > > Hello,
> > > 
> > > On 16-08-03 17:13:11, Marek Vasut wrote:
> > > > On 08/03/2016 01:58 PM, Sanchayan Maity wrote:
> > > > > Add driver model support for Vybrid USB driver.
> > > > > 
> > > > > Signed-off-by: Sanchayan Maity <maitysanchayan at gmail.com>
> > > > 
> > > > CCing Lukasz.
> > > > 
> > > > > ---
> > > > > Hello,
> > > > > 
> > > > > I am trying to migrate the Vybrid USB driver to driver model.
> > > > > Patches are based on top of uboot master branch. With this
> > > > > implementation, host works perfectly fine on both USB ports
> > > > > but I have problems using it in client mode.
> > > > > 
> > > > > I tried DFU to test client mode and I get the following
> > > > > 
> > > > > Colibri VFxx # version
> > > > > 
> > > > > U-Boot 2016.09-rc1-00235-g4e8c122 (Aug 03 2016 - 17:07:48
> > > > > +0530) arm-linux-gnueabihf-gcc (Linaro GCC 5.2-2015.11-2)
> > > > > 5.2.1 20151005 GNU ld (GNU Binutils) 2.25.0 Linaro 2015_10
> > > > > Colibri VFxx # dfu 0 nand 4
> > > > > using id 'nand0,0'
> > > > > using id 'nand0,1'
> > > > > using id 'nand0,3'
> > > > > g_dnl_register: failed!, error: -19
> > > > > data abort
> > > > > pc : [<8ff80f18>]          lr : [<8ff612a9>]
> > > > > reloc pc : [<3f431f18>]    lr : [<3f4122a9>]
> > > > > sp : 8fd15000  ip : 00000000     fp : 00002710
> > > > > r10: 8ffb50cc  r9 : 8fd16ee8     r8 : 8ffbc574
> > > > > r7 : 00000000  r6 : 00000000     r5 : 00000000  r4 : 00000000
> > > > > r3 : 0000f4b9  r2 : 80000000     r1 : 00000001  r0 : 00000000
> > > > > Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
> > > > > Resetting CPU ...
> > > > > 
> > > > > resetting ...
> > > 
> > > FWIW here is output with DEBUG enabled in uclass.c
> > > 
> > > when testing with DFU:
> > > 
> > > uclass_find_device_by_seq: 1 0
> > >    - -1 -1
> > >    - -1 -1
> > >    - not found
> > > g_dnl_register: failed!, error: -19
> > > data abort
> > > pc : [<8ff80fb0>]          lr : [<8ff612a9>]
> > > reloc pc : [<3f431fb0>]    lr : [<3f4122a9>]
> > > sp : 8fd15000  ip : 00000000     fp : 00002710
> > > r10: 8ffb5274  r9 : 8fd16ee8     r8 : 8ffbc714
> > > r7 : 00000000  r6 : 00000000     r5 : 00000000  r4 : 00000000
> > > r3 : 0000f4b9  r2 : 80000000     r1 : 00000001  r0 : 00000000
> > > Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
> > > Resetting CPU ...
> > > 
> > > resetting ...
> > > 
> > > When testing host mode with usb start
> > > 
> > > Colibri VFxx # usb start
> > > starting USB...
> > > USB0:   uclass_find_device_by_seq: 0 -1
> > > uclass_find_device_by_seq: 0 0
> > >    - -1 -1
> > >    - -1 -1
> > >    - not found
> > > USB EHCI 1.00
> > > USB1:   uclass_find_device_by_seq: 0 -1
> > > uclass_find_device_by_seq: 0 0
> > >    - -1 0
> > >    - found
> > > uclass_find_device_by_seq: 0 1
> > >    - -1 0
> > >    - -1 1
> > >    - found
> > > uclass_find_device_by_seq: 0 2
> > >    - -1 0
> > >    - -1 1
> > >    - -1 -1
> > >    - not found
> > > uclass_find_device_by_seq: 0 -1
> > > uclass_find_device_by_seq: 0 0
> > >    - -1 0
> > >    - found
> > > uclass_find_device_by_seq: 0 1
> > >    - -1 0
> > >    - -1 -1
> > >    - not found
> > > USB EHCI 1.00
> > > scanning bus 0 for devices... uclass_find_device_by_seq: 0 -1
> > > uclass_find_device_by_seq: 0 0
> > >    - -1 -1
> > >    - not found
> > > uclass_find_device_by_seq: 0 -1
> > > uclass_find_device_by_seq: 0 0
> > >    - -1 -1
> > >    - not found
> > > 2 USB Device(s) found
> > > scanning bus 1 for devices... uclass_find_device_by_seq: 0 -1
> > > uclass_find_device_by_seq: 0 0
> > >    - -1 0
> > >    - found
> > > uclass_find_device_by_seq: 0 1
> > >    - -1 0
> > >    - -1 -1
> > >    - not found
> > > uclass_find_device_by_seq: 0 -1
> > > uclass_find_device_by_seq: 0 0
> > >    - -1 0
> > >    - found
> > > uclass_find_device_by_seq: 0 1
> > >    - -1 0
> > >    - -1 1
> > >    - found
> > > uclass_find_device_by_seq: 0 2
> > >    - -1 0
> > >    - -1 1
> > >    - -1 -1
> > >    - not found
> > > 2 USB Device(s) found
> > > 
> > > Regards,
> > > Sanchayan.
> > > 
> > > > > 
> > > > > It seems to return ENODEV from usb_setup_ehci_gadget after
> > > > > calling uclass_find_device_by_seq. I am not sure what I am
> > > > > missing in the current implementation. Can someone point me
> > > > > in the correct direction? Since host works on both ports I
> > > > > would assume the device tree nodes are correct.
> > > > > 
> > > > > Tried to look in documentation and usb-info.txt mentions that
> > > > > gadget framework does not use driver model. Does this imply I
> > > > > cannot use any usb gadget functionality if I am using USB DM?
> > > > > However the function usb_gadget_register_driver in ci_udc.c
> > > > > does have a CONFIG_DM_USB and calls into
> > > > > usb_setup_ehci_gadget which is in usb-uclass.c.
> > 
> > @Lukasz
> > Can you comment?
> 
> diff --git a/drivers/usb/host/usb-uclass.c
> b/drivers/usb/host/usb-uclass.c index be114fc..1bcd73f 100644
> --- a/drivers/usb/host/usb-uclass.c
> +++ b/drivers/usb/host/usb-uclass.c
> @@ -355,7 +355,7 @@ int usb_setup_ehci_gadget(struct ehci_ctrl
> **ctlrp) int ret;
>  
>         /* Find the old device and remove it */
> -       ret = uclass_find_device_by_seq(UCLASS_USB, 0, true, &dev);
> +       ret = uclass_find_device_by_seq(UCLASS_USB, 0, false, &dev);
>         if (ret)
>                 return ret;
>         ret = device_remove(dev);
> 
> Having the above change, the following sequence of commands seems to
> work?
> 
> U-Boot 2016.09-rc1-00329-g4e72f10-dirty (Aug 08 2016 - 19:19:38 +0530)
> arm-linux-gnueabihf-gcc (Linaro GCC 5.2-2015.11-2) 5.2.1 20151005
> GNU ld (GNU Binutils) 2.25.0 Linaro 2015_10
> Colibri VFxx # dfu 0 nand 4
> using id 'nand0,0'
> using id 'nand0,1'
> using id 'nand0,3'
> g_dnl_register: failed!, error: -19
> ERROR: g_dnl_register failed
> at cmd/dfu.c:59/do_dfu()
> Colibri VFxx # usb start
> starting USB...
> USB0:   USB EHCI 1.00
> USB1:   USB EHCI 1.00
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning bus 1 for devices... 2 USB Device(s) found
> Colibri VFxx # dfu 0 nand 4
> using id 'nand0,0'
> using id 'nand0,1'
> using id 'nand0,3'
> 
> Using the third parameter as false makes it look for probed devices.
> Since it got probed because of the "usb start" it now works. With the
> original parameter as "true" it will look for a device that will
> request the concerned sequence number if probed. However it seems to
> not work?

Could you confirm that for your platform DFU is working without
CONFIG_DM_USB enabled? 

> 
> Ideally it should have worked with just a command of "dfu 0 nand 4".
> 
> Regards,
> Sanchayan.
> 
> > 
> > Regards,
> > Sanchayan.
> > 
> > > > > 
> > > > > Regards,
> > > > > Sanchayan.
> > > > > ---
> > > > >  drivers/usb/host/ehci-vf.c | 123
> > > > > ++++++++++++++++++++++++++++++++++++++++++--- 1 file changed,
> > > > > 117 insertions(+), 6 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/usb/host/ehci-vf.c
> > > > > b/drivers/usb/host/ehci-vf.c index 61789dd..8c5c593 100644
> > > > > --- a/drivers/usb/host/ehci-vf.c
> > > > > +++ b/drivers/usb/host/ehci-vf.c
> > > > > @@ -8,6 +8,7 @@
> > > > >   */
> > > > >  
> > > > >  #include <common.h>
> > > > > +#include <dm.h>
> > > > >  #include <usb.h>
> > > > >  #include <errno.h>
> > > > >  #include <linux/compiler.h>
> > > > > @@ -131,6 +132,24 @@ int __weak board_ehci_hcd_init(int port)
> > > > >  	return 0;
> > > > >  }
> > > > >  
> > > > > +int ehci_vf_common_init(struct usb_ehci *ehci, int index)
> > > > > +{
> > > > > +	int ret;
> > > > > +
> > > > > +	/* Do board specific initialisation */
> > > > > +	ret = board_ehci_hcd_init(index);
> > > > > +	if (ret)
> > > > > +		return ret;
> > > > > +
> > > > > +	usb_power_config(index);
> > > > > +	usb_oc_config(index);
> > > > > +	usb_internal_phy_clock_gate(index);
> > > > > +	usb_phy_enable(index, ehci);
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +#ifndef CONFIG_DM_USB
> > > > >  int ehci_hcd_init(int index, enum usb_init_type init,
> > > > >  		struct ehci_hccr **hccr, struct ehci_hcor
> > > > > **hcor) {
> > > > > @@ -143,12 +162,9 @@ int ehci_hcd_init(int index, enum
> > > > > usb_init_type init, ehci = (struct usb_ehci
> > > > > *)nc_reg_bases[index]; 
> > > > >  	/* Do board specific initialisation */
> > > > > -	board_ehci_hcd_init(index);
> > > > > -
> > > > > -	usb_power_config(index);
> > > > > -	usb_oc_config(index);
> > > > > -	usb_internal_phy_clock_gate(index);
> > > > > -	usb_phy_enable(index, ehci);
> > > > > +	ret = ehci_vf_common_init(index);
> > > > > +	if (ret)
> > > > > +		return ret;
> > > > >  
> > > > >  	*hccr = (struct ehci_hccr
> > > > > *)((uint32_t)&ehci->caplength); *hcor = (struct ehci_hcor
> > > > > *)((uint32_t)*hccr + @@ -175,3 +191,98 @@ int
> > > > > ehci_hcd_stop(int index) {
> > > > >  	return 0;
> > > > >  }
> > > > > +#else
> > > > > +struct ehci_vf_priv_data {
> > > > > +	struct ehci_ctrl ctrl;
> > > > > +	struct usb_ehci *ehci;
> > > > > +	enum usb_init_type init_type;
> > > > > +	int portnr;
> > > > > +};
> > > > > +
> > > > > +static int vf_init_after_reset(struct ehci_ctrl *dev)
> > > > > +{
> > > > > +	struct ehci_vf_priv_data *priv = dev->priv;
> > > > > +	enum usb_init_type type = priv->init_type;
> > > > > +	struct usb_ehci *ehci = priv->ehci;
> > > > > +	int ret;
> > > > > +
> > > > > +	ret = ehci_vf_common_init(priv->ehci, priv->portnr);
> > > > > +	if (ret)
> > > > > +		return ret;
> > > > > +
> > > > > +	if (type == USB_INIT_DEVICE)
> > > > > +		return 0;
> > > > > +
> > > > > +	setbits_le32(&ehci->usbmode, CM_HOST);
> > > > > +	writel((PORT_PTS_UTMI | PORT_PTS_PTW),
> > > > > &ehci->portsc);
> > > > > +	setbits_le32(&ehci->portsc, USB_EN);
> > > > > +
> > > > > +	mdelay(10);
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +static const struct ehci_ops vf_ehci_ops = {
> > > > > +	.init_after_reset = vf_init_after_reset
> > > > > +};
> > > > > +
> > > > > +static int ehci_usb_probe(struct udevice *dev)
> > > > > +{
> > > > > +	struct usb_platdata *plat = dev_get_platdata(dev);
> > > > > +	struct usb_ehci *ehci = (struct usb_ehci
> > > > > *)dev_get_addr(dev);
> > > > > +	struct ehci_vf_priv_data *priv = dev_get_priv(dev);
> > > > > +	struct ehci_hccr *hccr;
> > > > > +	struct ehci_hcor *hcor;
> > > > > +	int ret;
> > > > > +
> > > > > +	priv->ehci = ehci;
> > > > > +	priv->portnr = dev->seq;
> > > > > +	priv->init_type = plat->init_type;
> > > > > +
> > > > > +	ret = ehci_vf_common_init(ehci, priv->portnr);
> > > > > +	if (ret)
> > > > > +		return ret;
> > > > > +
> > > > > +	if (priv->init_type == USB_INIT_HOST) {
> > > > > +		setbits_le32(&ehci->usbmode, CM_HOST);
> > > > > +		writel((PORT_PTS_UTMI | PORT_PTS_PTW),
> > > > > &ehci->portsc);
> > > > > +		setbits_le32(&ehci->portsc, USB_EN);
> > > > > +	}
> > > > > +
> > > > > +	mdelay(10);
> > > > > +
> > > > > +	hccr = (struct ehci_hccr
> > > > > *)((uint32_t)&ehci->caplength);
> > > > > +	hcor = (struct ehci_hcor *)((uint32_t)hccr +
> > > > > +
> > > > > HC_LENGTH(ehci_readl(&hccr->cr_capbase))); +
> > > > > +	return ehci_register(dev, hccr, hcor, &vf_ehci_ops,
> > > > > 0, plat->init_type); +}
> > > > > +
> > > > > +static int ehci_usb_remove(struct udevice *dev)
> > > > > +{
> > > > > +	int ret;
> > > > > +
> > > > > +	ret = ehci_deregister(dev);
> > > > > +	if (ret)
> > > > > +		return ret;
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +static const struct udevice_id vf_usb_ids[] = {
> > > > > +	{ .compatible = "fsl,vf610-usb" },
> > > > > +	{ }
> > > > > +};
> > > > > +
> > > > > +U_BOOT_DRIVER(usb_ehci) = {
> > > > > +	.name = "ehci_vf",
> > > > > +	.id = UCLASS_USB,
> > > > > +	.of_match = vf_usb_ids,
> > > > > +	.probe = ehci_usb_probe,
> > > > > +	.remove = ehci_usb_remove,
> > > > > +	.ops = &ehci_usb_ops,
> > > > > +	.platdata_auto_alloc_size = sizeof(struct
> > > > > usb_platdata),
> > > > > +	.priv_auto_alloc_size = sizeof(struct
> > > > > ehci_vf_priv_data),
> > > > > +	.flags = DM_FLAG_ALLOC_PRIV_DMA,
> > > > > +};
> > > > > +#endif
> > > > > 
> > > > 
> > > > 
> > > > -- 
> > > > Best regards,
> > > > Marek Vasut
> 



-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group


More information about the U-Boot mailing list