[U-Boot] [PATCH v2 1/2] sunxi: add proper device tree for iNet D978 rev2 boards

Hans de Goede hdegoede at redhat.com
Mon Aug 29 16:56:31 CEST 2016


Hi,

On 27-08-16 16:16, Icenowy Zheng wrote:
> Add a proper dts for the iNet D978 rev2 based A33 tablets.
>
> Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>

Thank you, I've merged both patches and pushed them to
u-boot-sunxi/next

Next time when you add a defconfig file please
also update board/sunxi/MAINTAINERS

(I've added an update of it to the second patch before pushing)

Regards,

Hans




> ---
> Changes since v2:
> - Use Hans's sun8i-reference-design-tablet.dtsi. (Note: it makes the patch depends
>   on the sun8i-reference-design-tablet.dtsi patch)
> - Use the same dt file as applied into linux kernel.
>
>  arch/arm/dts/Makefile                     |  1 +
>  arch/arm/dts/sun8i-a33-inet-d978-rev2.dts | 88 +++++++++++++++++++++++++++++++
>  2 files changed, 89 insertions(+)
>  create mode 100644 arch/arm/dts/sun8i-a33-inet-d978-rev2.dts
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 223124e..d2749da 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -239,6 +239,7 @@ dtb-$(CONFIG_MACH_SUN8I_A23) += \
>  	sun8i-a23-q8-tablet.dtb
>  dtb-$(CONFIG_MACH_SUN8I_A33) += \
>  	sun8i-a33-ga10h-v1.1.dtb \
> +	sun8i-a33-inet-d978-rev2.dtb \
>  	sun8i-a33-q8-tablet.dtb \
>  	sun8i-a33-sinlinx-sina33.dtb \
>  	sun8i-r16-parrot.dtb
> diff --git a/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts
> new file mode 100644
> index 0000000..0f52cd9
> --- /dev/null
> +++ b/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts
> @@ -0,0 +1,88 @@
> +/*
> + * Copyright 2015 Hans de Goede <hdegoede at redhat.com>
> + * Copyright 2016 Icenowy Zheng <icenowy at aosc.xyz>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "sun8i-a33.dtsi"
> +#include "sun8i-reference-design-tablet.dtsi"
> +
> +/ {
> +	model = "INet-D978 Rev 02";
> +	compatible = "primux,inet-d978-rev2", "allwinner,sun8i-a33";
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&led_pin_d978>;
> +
> +		home {
> +			label = "d978:blue:home";
> +			gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
> +		};
> +	};
> +};
> +
> +&mmc1_pins_a {
> +	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
> +};
> +
> +&mmc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc1_pins_a>;
> +	vmmc-supply = <&reg_dldo1>;
> +	bus-width = <4>;
> +	non-removable;
> +	status = "okay";
> +
> +	rtl8723bs: sdio_wifi at 1 {
> +		reg = <1>;
> +	};
> +};
> +
> +&r_pio {
> +	led_pin_d978: led_pin_d978 at 0 {
> +		allwinner,pins = "PL5";
> +		allwinner,function = "gpio_out";
> +		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
> +		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +	};
> +};
>


More information about the U-Boot mailing list