[U-Boot] [U-Boot, 1/3] mmc: fsl: reset to normal boot mode when eMMC fast boot

Peng Fan van.freenix at gmail.com
Mon Aug 8 06:31:52 CEST 2016


Hi Jaehoon,
On Thu, Aug 04, 2016 at 02:32:16PM +0900, Jaehoon Chung wrote:
>Hi Peng,
>
>On 04/26/2016 03:54 PM, Peng Fan wrote:
>> When booting in eMMC fast boot, MMC host does not exit from
>> boot mode after bootrom loading image. So the first command
>> 'CMD0' sent in uboot will pull down the CMD line to low and
>> cause errors.
>> 
>> This patch cleans the MMC boot register in "mmc_init" to put the
>> MMC host back to normal mode.
>
>Could you resend the patch-set [1/3 - 3/3] on latest u-boot?
>After that, I will check..

This patch set already merged through York's tree.

Thanks,
Peng.

>
>Best Regards,
>Jaehoon Chung
>
>> 
>> Also clear DLL_CTRL delay line settings at USDHC initialization
>> to eliminate the pre-settings from boot rom.
>> 
>> Signed-off-by: Peng Fan <van.freenix at gmail.com>
>> Cc: Pantelis Antoniou <panto at antoniou-consulting.com>
>> Cc: York Sun <york.sun at nxp.com>
>> Cc: Stefano Babic <sbabic at denx.de>
>> ---
>>  drivers/mmc/fsl_esdhc.c | 38 +++++++++++++++++++++++++++++---------
>>  include/fsl_esdhc.h     |  6 ++++++
>>  2 files changed, 35 insertions(+), 9 deletions(-)
>> 
>> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
>> index 65ecff5..15cd419 100644
>> --- a/drivers/mmc/fsl_esdhc.c
>> +++ b/drivers/mmc/fsl_esdhc.c
>> @@ -57,21 +57,27 @@ struct fsl_esdhc {
>>  	uint    fevt;		/* Force event register */
>>  	uint    admaes;		/* ADMA error status register */
>>  	uint    adsaddr;	/* ADMA system address register */
>> -	char    reserved2[100];	/* reserved */
>> -	uint    vendorspec;	/* Vendor Specific register */
>> -	char    reserved3[56];	/* reserved */
>> +	char    reserved2[4];
>> +	uint    dllctrl;
>> +	uint    dllstat;
>> +	uint    clktunectrlstatus;
>> +	char    reserved3[84];
>> +	uint    vendorspec;
>> +	uint    mmcboot;
>> +	uint    vendorspec2;
>> +	char	reserved4[48];
>>  	uint    hostver;	/* Host controller version register */
>> -	char    reserved4[4];	/* reserved */
>> -	uint    dmaerraddr;	/* DMA error address register */
>>  	char    reserved5[4];	/* reserved */
>> -	uint    dmaerrattr;	/* DMA error attribute register */
>> +	uint    dmaerraddr;	/* DMA error address register */
>>  	char    reserved6[4];	/* reserved */
>> +	uint    dmaerrattr;	/* DMA error attribute register */
>> +	char    reserved7[4];	/* reserved */
>>  	uint    hostcapblt2;	/* Host controller capabilities register 2 */
>> -	char    reserved7[8];	/* reserved */
>> +	char    reserved8[8];	/* reserved */
>>  	uint    tcr;		/* Tuning control register */
>> -	char    reserved8[28];	/* reserved */
>> +	char    reserved9[28];	/* reserved */
>>  	uint    sddirctl;	/* SD direction control register */
>> -	char    reserved9[712];	/* reserved */
>> +	char    reserved10[712];/* reserved */
>>  	uint    scr;		/* eSDHC control register */
>>  };
>>  
>> @@ -618,6 +624,20 @@ static int esdhc_init(struct mmc *mmc)
>>  	while ((esdhc_read32(&regs->sysctl) & SYSCTL_RSTA) && --timeout)
>>  		udelay(1000);
>>  
>> +#if defined(CONFIG_FSL_USDHC)
>> +	/* RSTA doesn't reset MMC_BOOT register, so manually reset it */
>> +	esdhc_write32(&regs->mmcboot, 0x0);
>> +	/* Reset MIX_CTRL and CLK_TUNE_CTRL_STATUS regs to 0 */
>> +	esdhc_write32(&regs->mixctrl, 0x0);
>> +	esdhc_write32(&regs->clktunectrlstatus, 0x0);
>> +
>> +	/* Put VEND_SPEC to default value */
>> +	esdhc_write32(&regs->vendorspec, VENDORSPEC_INIT);
>> +
>> +	/* Disable DLL_CTRL delay line */
>> +	esdhc_write32(&regs->dllctrl, 0x0);
>> +#endif
>> +
>>  #ifndef ARCH_MXC
>>  	/* Enable cache snooping */
>>  	esdhc_write32(&regs->scr, 0x00000040);
>> diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
>> index fa760a5..78c67c8 100644
>> --- a/include/fsl_esdhc.h
>> +++ b/include/fsl_esdhc.h
>> @@ -35,6 +35,12 @@
>>  #define SYSCTL_RSTC		0x02000000
>>  #define SYSCTL_RSTD		0x04000000
>>  
>> +#define VENDORSPEC_CKEN		0x00004000
>> +#define VENDORSPEC_PEREN	0x00002000
>> +#define VENDORSPEC_HCKEN	0x00001000
>> +#define VENDORSPEC_IPGEN	0x00000800
>> +#define VENDORSPEC_INIT		0x20007809
>> +
>>  #define IRQSTAT			0x0002e030
>>  #define IRQSTAT_DMAE		(0x10000000)
>>  #define IRQSTAT_AC12E		(0x01000000)
>> 
>


More information about the U-Boot mailing list