[U-Boot] [PATCH 3/3] warp7: Print secure/non-secure mode info

Fabio Estevam festevam at gmail.com
Thu Aug 25 22:57:45 CEST 2016


From: Fabio Estevam <fabio.estevam at nxp.com>

warp7 has two targets:
    
- warp7_defconfig: boots in non-secure mode
- warp7_secure_defconfig: boots in secure mode
    
Print the mode that is being used to help users to easily identify
which target is running on the board.

Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
 board/warp7/warp7.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/board/warp7/warp7.c b/board/warp7/warp7.c
index 27e31f3..d3d2a0e 100644
--- a/board/warp7/warp7.c
+++ b/board/warp7/warp7.c
@@ -95,7 +95,14 @@ int board_init(void)
 
 int checkboard(void)
 {
-	puts("Board: WARP7\n");
+	char *mode;
+
+	if (IS_ENABLED(CONFIG_ARMV7_BOOT_SEC_DEFAULT))
+		mode = "secure";
+	else
+		mode = "non-secure";
+
+	printf("Board: WARP7 in %s mode\n", mode);
 
 	return 0;
 }
-- 
1.9.1



More information about the U-Boot mailing list