[U-Boot] [PATCH 2/2] panda: Initialize MMC power from TWL6030 in SPL

[Paul Kocialkowski]

This adds support for initializing MMC power from TWL6030 in SPL, which
is required when the bootrom didn't power the MMC device yet and U-Boot
is to be loaded from MMC (e.g. after setting boot mode from the SYS_BOOT
pins in peripheral boot).

Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
---
 board/ti/panda/panda.c        | 2 +-
 include/configs/omap4_panda.h | 3 +++
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 13b5daf..ebab4e7 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -292,12 +292,12 @@ int board_mmc_init(bd_t *bis)
 {
 	return omap_mmc_init(0, 0, 0, -1, -1);
 }
+#endif
 
 void board_mmc_power_init(void)
 {
 	twl6030_power_mmc_init(0);
 }
-#endif
 
 #ifdef CONFIG_USB_EHCI
 
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index ffa22c3..af9ff08 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -33,6 +33,9 @@
 
 #include <configs/ti_omap4_common.h>
 
+/* MMCSD FS mode is preferred */
+#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
+
 /* GPIO */
 
 /* ENV related config options */
-- 
2.9.3