[U-Boot] ZynqMP breakage

[Michal Simek]

On 16.8.2016 20:39, Alexander Graf wrote:
> Hi Michal,
> 
> I just tried to run the latest u-boot master + a few patches to implement generic PSCI RTS support on zynqmp and got this:
> 
> e
> U-Boot 2016.09-rc1-00453-ga0592f1 (Aug 16 2016 - 20:27:40 +0200) Xilinx ZynqMP ZCU102
> 
> I2C:   ready
> DRAM:  4 GiB
> EL Level:       EL2
> MMC:   sdhci at ff170000: 0
> Using default environment
> 
> In:    serial at ff000000
> Out:   serial at ff000000
> Err:   serial at ff000000
> Bootmode: SD_MODE1
> SCSI:  SATA link 0 timeout.
> Target spinup took 0 ms.
> AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
> flags: 64bit ncq pm clo only pmp fbss pio slum part ccc apst
> scanning bus for devices...
> "Synchronous Abort" handler, esr 0x96000004
> ELR:     7ff42d20
> LR:      7ff3ff10
> x0 : 0000000000000000 x1 : 0000000000000000
> x2 : 0000000000000001 x3 : 000000007df1aa80
> x4 : aaaaaaaaaaaaaaaa x5 : 0000000000000001
> x6 : 0000000000000200 x7 : 0000000000000004
> x8 : 000000007ff9f800 x9 : 0000000000000008
> x10: 000000007ff9f8f0 x11: 0000000000000000
> x12: 00000000ffffffff x13: 00000000ffffffff
> x14: 000000007ff8242f x15: 000000007ff82435
> x16: 000000007ff84388 x17: 000000007ff84388
> x18: 000000007df1ade8 x19: 000000007df1aa80
> x20: 000000007ff92cb8 x21: 000000007ff9f800
> x22: 000000007ff9f000 x23: 0000000000000078
> x24: 000000007ff9f8f0 x25: 0000000000000000
> x26: 000000007ff9f800 x27: 000000007ff9f000
> x28: 000000007ff9fb00 x29: 000000007df1aca0
> 
> Resetting CPU ...
> 
> resetting …
> 
> Is this a known problem?

Is this issue with usb?
I have usb off on zcu102 that's why if this usb issue
I am not aware about it.


Thanks,
Michal