[U-Boot] [PATCH v3 02/11] spi: cadence_qspi: Fix baud rate calculation

[Jagan Teki]

On Tue, Nov 29, 2016 at 6:28 PM, Phil Edworthy
<phil.edworthy at renesas.com> wrote:
> With the existing code, when the requested SPI clock rate is near
> to the lowest that can be achieved by the hardware (max divider
> of the ref clock is 32), the generated clock rate is wrong.
> For example, with a 50MHz ref clock, when asked for anything less
> than a 1.5MHz SPI clock, the code sets up the divider to generate
> 25MHz.
>
> This change fixes the calculation.
>
> Signed-off-by: Phil Edworthy <phil.edworthy at renesas.com>

Perhaps you missed, Marek Acked-by tag on previous version, don't
worry will add while applying if any.

Reviewed-by: Jagan Teki <jagan at openedev.com>

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.