December 2016 Archives by author
Starting: Thu Dec 1 00:38:50 CET 2016
Ending: Sat Dec 31 19:05:50 CET 2016
Messages: 2224
- [U-Boot] [PATCH v2 0/6] cleanup and enhancements for Colibri VFxx
Stefan Agner
- [U-Boot] [PATCH 1/2] libfdt: overlay: Fix missing symbols condition
Stefan Agner
- [U-Boot] [PATCH 2/2] cmd: fdt: Print error message when fdt application fails
Stefan Agner
- [U-Boot] [PATCH 1/2] Convert CONFIG_SPL_RAM_DEVICE to defconfig
Stefan Agner
- [U-Boot] [PATCH 2/2] spl: move RAM boot support in separate file
Stefan Agner
- [U-Boot] [PATCH 1/2] libfdt: overlay: Fix missing symbols condition
Stefan Agner
- [U-Boot] [PATCH 2/2] spl: move RAM boot support in separate file
Stefan Agner
- [U-Boot] [PATCH v2 1/2] libfdt: Correct fdt handling of overlays without fixups and base trees without symbols
Stefan Agner
- [U-Boot] [PATCH v2 2/2] cmd: fdt: Print error message when fdt application fails
Stefan Agner
- [U-Boot] [PATCH v2 1/2] Convert CONFIG_SPL_RAM_DEVICE to defconfig
Stefan Agner
- [U-Boot] [PATCH v2 2/2] spl: move RAM boot support in separate file
Stefan Agner
- [U-Boot] [PATCH v3 1/2] Convert CONFIG_SPL_RAM_DEVICE to defconfig
Stefan Agner
- [U-Boot] [PATCH v3 2/2] spl: move RAM boot support in separate file
Stefan Agner
- [U-Boot] [PATCH] imx_common: check for bmode Serial Downloader
Stefan Agner
- [U-Boot] [PATCH] bootm: relocate ramdisk if CONFIG_SYS_BOOT_RAMDISK_HIGH set
Rick Altherr
- [U-Boot] [PATCH] bootm: relocate ramdisk if CONFIG_SYS_BOOT_RAMDISK_HIGH set
Rick Altherr
- [U-Boot] Environment storage format stability
Kristian Amlie
- [U-Boot] Environment storage format stability
Kristian Amlie
- [U-Boot] Targets for BeagleBones
Kristian Amlie
- [U-Boot] Targets for BeagleBones
Kristian Amlie
- [U-Boot] Targets for BeagleBones
Kristian Amlie
- [U-Boot] [PATCH] nds32: Support serial DM.
Andes
- [U-Boot] [PATCH] nds32: Support timer DM.
Andes
- [U-Boot] [PATCH] nds32: Support mmc DM.
Andes
- [U-Boot] [PATCH] nds32: Support eth DM.
Andes
- [U-Boot] [PATCH 1/3] nds32: mmc: Support mmc DM.
Andes
- [U-Boot] [PATCH 2/3] nds32: mmc: Support mmc DM.
Andes
- [U-Boot] [PATCH 3/3] nds32: mmc: Support mmc DM.
Andes
- [U-Boot] [PATCH] imx_common: spl: Fix SPL boot from SD card
Stefano Babic
- [U-Boot] [PATCH v2 1/7] video: Kconfig: Add VIDEO_IPV3 entry
Stefano Babic
- [U-Boot] [PATCH v2 0/6] cleanup and enhancements for Colibri VFxx
Stefano Babic
- [U-Boot] [PATCH v2 0/6] cleanup and enhancements for Colibri VFxx
Stefano Babic
- [U-Boot] [PATCH 0/2] arm: imx: add boards apalis imx6, colibri imx6
Stefano Babic
- [U-Boot] [PATCH 1/6] udoo_neo: Remove USDHC3 support
Stefano Babic
- [U-Boot] [PATCH 2/6] udoo_neo: Move MX6SX configuration to Kconfig
Stefano Babic
- [U-Boot] [PATCH 3/6] udoo_neo: Staticize board_string()
Stefano Babic
- [U-Boot] [PATCH 4/6] udoo_neo: Remove mmcautodetect option
Stefano Babic
- [U-Boot] [PATCH 5/6] udoo_neo: Remove console option
Stefano Babic
- [U-Boot] [PATCH 6/6] udoo_neo: Add thermal support
Stefano Babic
- [U-Boot] [PATCH 1/3] power: pmic: Add Voltage configuration macro
Stefano Babic
- [U-Boot] [PATCH 2/3] udoo_neo: Add PFUZE300 PMIC support
Stefano Babic
- [U-Boot] [PATCH 3/3] udoo_neo: Add Ethernet support
Stefano Babic
- [U-Boot] [PATCH 0/2] ARM: imx6ul: Support liteSOM and liteBoard
Stefano Babic
- [U-Boot] [PATCH v4] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Stefano Babic
- [U-Boot] [PATCH] configs: colibri_vf: Add fdt_fixup environment variable
Stefano Babic
- [U-Boot] [PATCH V2 00/19] imx: add i.MX6SLL support
Stefano Babic
- [U-Boot] [PATCH v4 00/16] imx6: Add Engicam GEAM6UL/i.CoreM6 RQS board support
Stefano Babic
- [U-Boot] [PATCH v4 00/16] imx6: Add Engicam GEAM6UL/i.CoreM6 RQS board support
Stefano Babic
- [U-Boot] [PATCH v4 00/16] imx6: Add Engicam GEAM6UL/i.CoreM6 RQS board support
Stefano Babic
- [U-Boot] [PATCH v5 10/16] imx6: icorem6: Rename engicam icorem6 defconfig files
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH] Update Maintainer and Auther's email address
Ajay Bhargav
- [U-Boot] [PATCH] i2c: mv_i2c.c: Correct address endianness
Bradley Bolen
- [U-Boot] [PATCH 1/1] Adding MSCC PHY-VSC8530-VSC8531-VSC8540-VSC8541
Alexey Brodkin
- [U-Boot] [PATCH 1/1] Adding MSCC PHY-VSC8530-VSC8531-VSC8540-VSC8541
Alexey Brodkin
- [U-Boot] Rockchip RK3288 u-boot with mainline kernel
Rick Bronson
- [U-Boot] Rockchip RK3288 u-boot with mainline kernel
Rick Bronson
- [U-Boot] Rockchip RK3288 u-boot with mainline kernel
Rick Bronson
- [U-Boot] Rockchip RK3288 regulator device table problem
Rick Bronson
- [U-Boot] Rockchip RK3288 regulator device table problem
Rick Bronson
- [U-Boot] [PATCH v2 1/2] test/py: Allow to pass u_boot_log instead of console for run_and_log
Stefan Bruens
- [U-Boot] [PATCH v1] fat: fatwrite: fix the command for FAT12
Stefan Bruens
- [U-Boot] ext4: crash when writing a file
Stefan Bruens
- [U-Boot] [PATCH 2/7] ext4: determine group descriptor size for 64bit feature
Stefan Bruens
- [U-Boot] [PATCH] fs/ext4: Initialize group descriptor size for revision level 0 filesystems
Stefan Bruens
- [U-Boot] [PATCH v4] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Patrick Brünn
- [U-Boot] [PATCH v2 1/2] test/py: Allow to pass u_boot_log instead of console for run_and_log
Stefan Brüns
- [U-Boot] [PATCH v2 2/2] test/py: Create tests for ext4 and fat testing on sandbox
Stefan Brüns
- [U-Boot] [PATCH 0/2] fs/fat: more bugfixes, cleanups
Stefan Brüns
- [U-Boot] [PATCH 1/2] fs/fat: Avoid corruption of sectors following the FAT
Stefan Brüns
- [U-Boot] [PATCH 2/2] fs/fat: merge readwrite get_fatent_value() with readonly get_fatent()
Stefan Brüns
- [U-Boot] [PATCH v3 1/2] test/py: Pass u_boot_log instead of console for run_and_log
Stefan Brüns
- [U-Boot] [PATCH v2 0/2] fs/fat: more bugfixes, cleanups
Stefan Brüns
- [U-Boot] [PATCH v2 1/2] fs/fat: Avoid corruption of sectors following the FAT
Stefan Brüns
- [U-Boot] [PATCH v2 2/2] fs/fat: merge readwrite get_fatent_value() with readonly get_fatent()
Stefan Brüns
- [U-Boot] [PATCH] fs/fat: simplify get_fatent for FAT12
Stefan Brüns
- [U-Boot] [PATCH] fs/ext4: Initialize group descriptor size for revision level 0 filesystems
Stefan Brüns
- [U-Boot] [PATCH 01/10] ARM:dts: Added device tree for socfpga arria10 development kit sdmmc
Chee, Tien Fong
- [U-Boot] [PATCH 03/10] arm: socfpga: arria10: Enhanced socfpga_arria10_defconfig to support SPL
Chee, Tien Fong
- [U-Boot] [PATCH 04/10] arm: socfpga: arria10: Added clock manager and pin mux compat macro
Chee, Tien Fong
- [U-Boot] [PATCH 02/10] arm: socfpga: arria10: Added config option build for SPL
Chee, Tien Fong
- [U-Boot] [PATCH 05/10] arm: socfpga: arria10: Added support for Arria 10 SoC dev kit
Chee, Tien Fong
- [U-Boot] [PATCH 06/10] arm: socfpga: arria10: Added drivers for Arria10 Reset Manager
Chee, Tien Fong
- [U-Boot] [PATCH 07/10] arm: socfpga: arria10: Added miscellaneous drivers for Arria10
Chee, Tien Fong
- [U-Boot] [PATCH 02/10] arm: socfpga: arria10: Added config option build for SPL
Chee, Tien Fong
- [U-Boot] [PATCH 05/10] arm: socfpga: arria10: Added support for Arria 10 SoC dev kit
Chee, Tien Fong
- [U-Boot] [PATCH 06/10] arm: socfpga: arria10: Added drivers for Arria10 Reset Manager
Chee, Tien Fong
- [U-Boot] [PATCH 02/10] arm: socfpga: arria10: Added config option build for SPL
Chee, Tien Fong
- [U-Boot] [PATCH 04/10] arm: socfpga: arria10: Added clock manager and pin mux compat macro
Chee, Tien Fong
- [U-Boot] [PATCH 01/10] ARM:dts: Added device tree for socfpga arria10 development kit sdmmc
Chee, Tien Fong
- [U-Boot] [PATCH 08/10] arm: socfpga: arria10: Added drivers for Arria10 clock manager
Chee, Tien Fong
- [U-Boot] [PATCH 09/10] arm: socfpga: arria10: Added drivers for Arria10 pin mux/pins configuration
Chee, Tien Fong
- [U-Boot] [PATCH 10/10] arm: socfpga: arria10: Added Arria10 critical HW initialization to spl
Chee, Tien Fong
- [U-Boot] [PATCH 06/10] arm: socfpga: arria10: Added drivers for Arria10 Reset Manager
Chee, Tien Fong
- [U-Boot] [PATCH 04/10] arm: socfpga: arria10: Added clock manager and pin mux compat macro
Chee, Tien Fong
- [U-Boot] [PATCH 02/10] arm: socfpga: arria10: Added config option build for SPL
Chee, Tien Fong
- [U-Boot] [PATCH 04/10] arm: socfpga: arria10: Added clock manager and pin mux compat macro
Chee, Tien Fong
- [U-Boot] [PATCH 06/10] arm: socfpga: arria10: Added drivers for Arria10 Reset Manager
Chee, Tien Fong
- [U-Boot] [PATCH 04/10] arm: socfpga: arria10: Added clock manager and pin mux compat macro
Chee, Tien Fong
- [U-Boot] [PATCH 02/10] arm: socfpga: arria10: Added config option build for SPL
Chee, Tien Fong
- [U-Boot] [PATCH 10/10] arm: socfpga: arria10: Added Arria10 critical HW initialization to spl
Chee, Tien Fong
- [U-Boot] [PATCH v2 21/30] arm: socfpga: arria10: Enhanced socfpga_arria10_defconfig to support SPL
Chee, Tien Fong
- [U-Boot] rsa_verify calls fdt_next_node with a node offset from different device tree blob
Che-Liang Chiou
- [U-Boot] [PATCH 04/13] mmc: Fix warning if debug() is not used
Jaehoon Chung
- [U-Boot] [PATCH] nds32: Support mmc DM.
Jaehoon Chung
- [U-Boot] Please assign custodian for: u-boot-pmic / maintainers for: Samsung boards
Jaehoon Chung
- [U-Boot] [PATCH 05/13] mmc: Tinification of the mmc code
Jaehoon Chung
- [U-Boot] [PATCH 07/13] SPL: mmc: Make spl_mmc_load_image available
Jaehoon Chung
- [U-Boot] [PATCH 04/13] mmc: Fix warning if debug() is not used
Jaehoon Chung
- [U-Boot] [PATCH 06/13] mmc: Add JZ47xx SD/MMC controller driver
Jaehoon Chung
- [U-Boot] [PATCH v2 1/4] mmc: sdhci: Distinguish between base clock and maximum peripheral frequency
Jaehoon Chung
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Jaehoon Chung
- [U-Boot] [PATCH 02/14] spl: mmc: Fix build without LIBCOMMON_SUPPORT
Jaehoon Chung
- [U-Boot] [PATCH v1] dm: spl: mmc: Fix EXT SPL support
Jaehoon Chung
- [U-Boot] flash the images to NAND automatically with SD Boot in uboot?
Jaehoon Chung
- [U-Boot] flash the images to NAND automatically with SD Boot in uboot?
Jaehoon Chung
- [U-Boot] [RFC PATCH] mmc: spear: remove the entire spear_sdhci.c file
Jaehoon Chung
- [U-Boot] Uboot send pull request
Jaehoon Chung
- [U-Boot] [PATCH v3 0/4] mmc: sdhci: Add support for frequency constrained peripheral interfaces
Jaehoon Chung
- [U-Boot] [PATCH v3 1/4] mmc: sdhci: Distinguish between base clock and maximum peripheral frequency
Jaehoon Chung
- [U-Boot] [PATCH v3 2/4] serial: zynq: Remove unused index from get uart clock function
Jaehoon Chung
- [U-Boot] [PATCH v3 3/4] mmc: zynq: Determine base clock frequency via clock framework
Jaehoon Chung
- [U-Boot] [PATCH v3 4/4] mmc: zynq: Add fdt max-frequency support
Jaehoon Chung
- [U-Boot] [PATCH 0/6] dm: i2c: Set a timeline for conversion of i2c drivers
Jaehoon Chung
- [U-Boot] [PATCH v3 3/4] mmc: zynq: Determine base clock frequency via clock framework
Jaehoon Chung
- [U-Boot] [PATCH 5/6] mmc: move some SDHCI related options to Kconfig
Jaehoon Chung
- [U-Boot] [PATCH v3 0/4] mmc: sdhci: Add support for frequency constrained peripheral interfaces
Jaehoon Chung
- [U-Boot] [PATCH v2 2/6] mmc: complete unfinished move of CONFIG_MMC
Jaehoon Chung
- [U-Boot] [PATCH v2 3/6] mmc: make MMC driver entries dependent on MMC
Jaehoon Chung
- [U-Boot] [PATCH v2 4/6] mmc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCI
Jaehoon Chung
- [U-Boot] [PATCH v2 5/6] mmc: move some SDHCI related options to Kconfig
Jaehoon Chung
- [U-Boot] [PATCH v2 6/6] mmc: move MMC_SDHCI_IO_ACCESSORS to Kconfig
Jaehoon Chung
- [U-Boot] [PATCH v2 3/6] mmc: make MMC driver entries dependent on MMC
Jaehoon Chung
- [U-Boot] [PATCH v2 0/6] mmc: move some config options to Kconfig
Jaehoon Chung
- [U-Boot] [RFC PATCH] mmc: mmc-uclass: use the fixed devnum with aliase node
Jaehoon Chung
- [U-Boot] [PATCH] mmc: sdhci-cadence: add Cadence SD4HC support
Jaehoon Chung
- [U-Boot] [PATCH] usb: dwc2_udc_otg: remove the driver_desc as unused variable
Jaehoon Chung
- [U-Boot] [PATCH] usb: dwc2_udc_otg: remove the driver_desc as unused variable
Jaehoon Chung
- [U-Boot] [PATCH 0/3] dm: goni: support the DM PMIC
Jaehoon Chung
- [U-Boot] [PATCH 1/3] power: pmic: add the max8998 controller for DM
Jaehoon Chung
- [U-Boot] [PATCH 2/3] arm: dts: s5pc1xx-goni: add the pmic node for using DM
Jaehoon Chung
- [U-Boot] [PATCH 3/3] configs: enable the DM_PMIC and DM_I2C_GPIO for max8998 pmic
Jaehoon Chung
- [U-Boot] [PATCH] power: change from meaningless value to error number
Jaehoon Chung
- [U-Boot] [PATCHv2] power: change from meaningless value to error number
Jaehoon Chung
- [U-Boot] Rockchip RK3288 regulator device table problem
Jaehoon Chung
- [U-Boot] [PATCH] MAINTAINERS, git-mailrc: update the Power maintainer
Jaehoon Chung
- [U-Boot] [PATCH] mmc: Extend dependencies for zynq sdhci
Jaehoon Chung
- [U-Boot] [RFC PATCH] mmc: spear: remove the entire spear_sdhci.c file
Jaehoon Chung
- [U-Boot] [PATCH 0/3] dm: goni: support the DM PMIC
Jaehoon Chung
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Jaehoon Chung
- [U-Boot] [PATCH] arm: samsung: goni: use the driver model for max8998
Jaehoon Chung
- [U-Boot] [PATCH] board: samsung: update the MAINTAINERS file
Jaehoon Chung
- [U-Boot] [RESEND PATCH v2] mmc: rockchip_sdhci: add clock init for mmc
Jaehoon Chung
- [U-Boot] [PATCH V2 18/20] mmc: fsl_esdhc: support i.MX7ULP
Jaehoon Chung
- [U-Boot] [PATCH v3 2/6] mmc: tegra: introduce CONFIG_TEGRA_MMC to Kconfig
Jaehoon Chung
- [U-Boot] [PATCH v3 3/6] mmc: tegra: move CONFIG_TEGRA_MMC from headers to defconfigs
Jaehoon Chung
- [U-Boot] [PATCH v3 4/6] mmc: tegra: allow disabling external clock loopback
Jaehoon Chung
- [U-Boot] [PATCH] arm: samsung: goni: use the driver model for max8998
Jaehoon Chung
- [U-Boot] [RESEND PATCH v2] mmc: rockchip_sdhci: add clock init for mmc
Jaehoon Chung
- [U-Boot] [RESEND PATCH v2] mmc: rockchip_sdhci: add clock init for mmc
Jaehoon Chung
- [U-Boot] [RESEND PATCH v3 1/2] mmc: rockchip_sdhci: add clock init for mmc
Jaehoon Chung
- [U-Boot] [RESEND PATCH v3 2/2] dts: arm64: rk3399: add max-frequency for sdhci
Jaehoon Chung
- [U-Boot] [RESEND PATCH v3 1/2] mmc: rockchip_sdhci: add clock init for mmc
Jaehoon Chung
- [U-Boot] [RESEND PATCH v3 1/2] mmc: rockchip_sdhci: add clock init for mmc
Jaehoon Chung
- [U-Boot] [PATCH 00/11] mmc: clean the sdhci host controller
Jaehoon Chung
- [U-Boot] [PATCH 01/11] mmc: sdhci: disable the 8bit mode when host doesn't support it
Jaehoon Chung
- [U-Boot] [PATCH 02/11] mmc: sdhci: add the get_cd callback function in sdhci_ops
Jaehoon Chung
- [U-Boot] [PATCH 03/11] mmc: sdhci: remove the unused code about testing Card detect
Jaehoon Chung
- [U-Boot] [PATCH 04/11] mmc: pic32_sdhci: move the code to pic32_sdhci.c
Jaehoon Chung
- [U-Boot] [PATCH 05/11] mmc: sdhci: remove the SDHCI_QUIRK_NO_CD
Jaehoon Chung
- [U-Boot] [PATCH 06/11] mmc: change the set_ios return type from void to int
Jaehoon Chung
- [U-Boot] [PATCH 07/11] mmc: s5p_sdhci: add the s5p_set_clock function
Jaehoon Chung
- [U-Boot] [PATCH 08/11] mmc: sdhci: move the callback function into sdhci_ops
Jaehoon Chung
- [U-Boot] [PATCH 09/11] mmc: sdhci: use the bitops APIs in sdhci.h
Jaehoon Chung
- [U-Boot] [PATCH 10/11] mmc: sdhci: remove the SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER
Jaehoon Chung
- [U-Boot] [PATCH 11/11] mmc: sdhci: combine the Host controller v3.0 feature into one condition
Jaehoon Chung
- [U-Boot] [PATCHv2] power: change from meaningless value to error number
Jaehoon Chung
- [U-Boot] [PATCH 00/11] mmc: clean the sdhci host controller
Jaehoon Chung
- [U-Boot] [PATCH v2] disk: convert to Kconfig
Patrick DELAUNAY
- [U-Boot] [PATCH V2 14/20] serial: lpuart: restructure lpuart driver
Bhuvanchandra DV
- [U-Boot] [U-Boot, v4, 5/9] net: gmac_rk3288: Add RK3288 GMAC driver
David.Wu
- [U-Boot] [PATCH 1/2] defconfigs: dra7xx_hs_evm: Add default OPTEE load address
Andrew F. Davis
- [U-Boot] [PATCH 2/2] defconfigs: am57xx_hs_evm: Add default OPTEE load address
Andrew F. Davis
- [U-Boot] [PATCH v2 1/4] Introduce CONFIG_SPL_ABORT_ON_NON_FIT_IMAGE
Andrew F. Davis
- [U-Boot] [PATCH 1/7] configs: Fixup defconfigs ordering
Andrew F. Davis
- [U-Boot] [PATCH 2/7] disk: Add CONFIG_PARTITION to Kconfig
Andrew F. Davis
- [U-Boot] [PATCH 3/7] disk: Convert CONFIG_MAC_PARTITION to Kconfig
Andrew F. Davis
- [U-Boot] [PATCH 4/7] disk: Convert CONFIG_DOS_PARTITION to Kconfig
Andrew F. Davis
- [U-Boot] [PATCH 5/7] disk: Convert CONFIG_ISO_PARTITION to Kconfig
Andrew F. Davis
- [U-Boot] [PATCH 6/7] disk: Convert CONFIG_AMIGA_PARTITION to Kconfig
Andrew F. Davis
- [U-Boot] [PATCH 7/7] disk: Convert CONFIG_EFI_PARTITION to Kconfig
Andrew F. Davis
- [U-Boot] [PATCH 1/7] configs: Fixup defconfigs ordering
Andrew F. Davis
- [U-Boot] [PATCH 1/1] arm: mach-omap2: Fix secure file generation
Andrew F. Davis
- [U-Boot] [PATCH 2/7] disk: Add CONFIG_PARTITION to Kconfig
Andrew F. Davis
- [U-Boot] [U-Boot, 1/1] arm: mach-omap2: Fix secure file generation
Andrew F. Davis
- [U-Boot] [U-Boot, 1/1] arm: mach-omap2: Fix secure file generation
Andrew F. Davis
- [U-Boot] [U-Boot, 1/1] arm: mach-omap2: Fix secure file generation
Andrew F. Davis
- [U-Boot] i'm assuming comment "/* board/?/flash.c */" in flash.h is way obsolete
Robert P. J. Day
- [U-Boot] curious snippet in drivers/mtd/dataflash.c
Robert P. J. Day
- [U-Boot] [PATCH] doc/README.cfi: Update code snippet for flash_cmd_reset()
Robert P. J. Day
- [U-Boot] [PATCH] digsy_mtc.c: Minor spelling/grammar fixes.
Robert P. J. Day
- [U-Boot] [PATCH v2] doc/README.cfi: Update code snippet, and add example.
Robert P. J. Day
- [U-Boot] any value to "#if defined(CONFIG_OXC) || defined(CONFIG_RMU)" test in board_r.c?
Robert P. J. Day
- [U-Boot] any ongoing value to "CONFIG_SYS_FLASH_CHECKSUM" config variable?
Robert P. J. Day
- [U-Boot] any remaining value to "board_flash_wp_on()" routine?
Robert P. J. Day
- [U-Boot] [PATCH v2] disk: convert to Kconfig
Patrick Delaunay
- [U-Boot] [PATCH v3] disk: convert to Kconfig
Patrick Delaunay
- [U-Boot] [PATCH] usb: gadget: dfu: add functional descriptor in descriptor set
Patrick Delaunay
- [U-Boot] [PATCH 0/2] Series to clean handle_XXX() in f_dfu.c
Patrick Delaunay
- [U-Boot] [PATCH 1/2] usb: gadget: dfu: correct size for USB_REQ_DFU_GETSTATE result
Patrick Delaunay
- [U-Boot] [PATCH 2/2] usb: gadget: dfu: add result for handle_getstatus()
Patrick Delaunay
- [U-Boot] Environment storage format stability
Wolfgang Denk
- [U-Boot] [PATCH] common: Fix logic in fpga programming
Wolfgang Denk
- [U-Boot] [PATCH] common: Fix logic in fpga programming
Wolfgang Denk
- [U-Boot] [BUG report] imx6: CACHE Misaligned operation
Francesco Dolcini
- [U-Boot] [PATCH v2 2/2] common/board_f.c: align m68k arch to use CONFIG_DISPLAY_CPUINFO
Angelo Dureghello
- [U-Boot] [PATCH v3 10/11] spi: cadence_qspi: Change readdata_capture() arg to bool
Phil Edworthy
- [U-Boot] [PATCH v3 11/11] spi: cadence_qspi: Support specifying the sample edge used
Phil Edworthy
- [U-Boot] [PATCH v3 11/11] spi: cadence_qspi: Support specifying the sample edge used
Phil Edworthy
- [U-Boot] [PATCH v3 10/11] spi: cadence_qspi: Change readdata_capture() arg to bool
Phil Edworthy
- [U-Boot] [PATCH v3 11/11] spi: cadence_qspi: Support specifying the sample edge used
Phil Edworthy
- [U-Boot] [PATCH v3 11/11] spi: cadence_qspi: Support specifying the sample edge used
Phil Edworthy
- [U-Boot] [PATCH v3 11/11] spi: cadence_qspi: Support specifying the sample edge used
Phil Edworthy
- [U-Boot] [PATCH v3 11/11] spi: cadence_qspi: Support specifying the sample edge used
Phil Edworthy
- [U-Boot] Problem with qspi when using micron devices
Phil Edworthy
- [U-Boot] [PATCH 0/5] net: phy: Add Marvell M88E1512
Phil Edworthy
- [U-Boot] [PATCH 1/5] net: phy: Fix mask so that we can identify Marvell 88E1518
Phil Edworthy
- [U-Boot] [PATCH 2/5] net: phy: Add support for Marvell M88E1512
Phil Edworthy
- [U-Boot] [PATCH 3/5] net: phy: Marvell 88E151x: Add support for RGMII
Phil Edworthy
- [U-Boot] [PATCH 4/5] net: phy: Marvell 88E151x: Increase delay after init
Phil Edworthy
- [U-Boot] [PATCH 5/5] net: phy: Marvell: Use phy_interface_is_rgmii helper function
Phil Edworthy
- [U-Boot] [PATCH] net: phy: ti: Fix dp83867 RGMII_TXID interface path
Phil Edworthy
- [U-Boot] [PATCH 2/5] net: phy: Add support for Marvell M88E1512
Phil Edworthy
- [U-Boot] [PATCH 3/5] net: phy: Marvell 88E151x: Add support for RGMII
Phil Edworthy
- [U-Boot] [PATCH] net: phy: Improve the Marvell 151x constants
Phil Edworthy
- [U-Boot] [PATCH v2 0/5] net: phy: Add Marvell M88E1512
Phil Edworthy
- [U-Boot] [PATCH v2 1/5] net: phy: Fix mask so that we can identify Marvell 88E1518
Phil Edworthy
- [U-Boot] [PATCH v2 2/5] net: phy: Add support for Marvell M88E1512
Phil Edworthy
- [U-Boot] [PATCH v2 3/5] net: phy: Marvell 88E151x: Add support for RGMII
Phil Edworthy
- [U-Boot] [PATCH v2 4/5] net: phy: Marvell 88E151x: Increase delay after init
Phil Edworthy
- [U-Boot] [PATCH v2 5/5] net: phy: Marvell: Use phy_interface_is_rgmii helper function
Phil Edworthy
- [U-Boot] [PATCH] sf: Do not force the DT memory map size to exactly match the device
Phil Edworthy
- [U-Boot] [PATCH v2 3/5] net: phy: Marvell 88E151x: Add support for RGMII
Phil Edworthy
- [U-Boot] [PATCH v2 3/5] net: phy: Marvell 88E151x: Add support for RGMII
Phil Edworthy
- [U-Boot] [PATCH v2 3/5] net: phy: Marvell 88E151x: Add support for RGMII
Phil Edworthy
- [U-Boot] [PATCH v3 0/3] net: phy: Add Marvell M88E1512
Phil Edworthy
- [U-Boot] [PATCH v3 1/3] net: phy: Fix mask so that we can identify Marvell 88E1518
Phil Edworthy
- [U-Boot] [PATCH v3 2/3] net: phy: Add support for Marvell M88E1512
Phil Edworthy
- [U-Boot] [PATCH v3 3/3] net: phy: Marvell: Use phy_interface_is_rgmii helper function
Phil Edworthy
- [U-Boot] [PATCH] net: phy: vitesse: Fix cis8204 RGMII_ID code
Phil Edworthy
- [U-Boot] Problem with qspi when using micron devices
Phil Edworthy
- [U-Boot] [PATCH] sf: ids: Correct Micron n25q128 flags
Phil Edworthy
- [U-Boot] [PATCH] sf: ids: Correct Micron n25q128 flags
Phil Edworthy
- [U-Boot] [PATCH] sf: ids: Correct Micron n25q128 flags
Phil Edworthy
- [U-Boot] [PATCH 04/17] mvebu: Add board_pex_config()
Dirk Eibach
- [U-Boot] [PATCH 03/17] net: phy: Support Marvell 88E1680
Dirk Eibach
- [U-Boot] [PATCH] imx_common: spl: Fix SPL boot from SD card
Fabio Estevam
- [U-Boot] [PATCH] imx_common: spl: Fix SPL boot from SD card
Fabio Estevam
- [U-Boot] [PATCH] Revert "ARM: mx6: add MMC2 boot device detection support in SPL"
Fabio Estevam
- [U-Boot] [PATCH 1/6] udoo_neo: Remove USDHC3 support
Fabio Estevam
- [U-Boot] [PATCH 2/6] udoo_neo: Move MX6SX configuration to Kconfig
Fabio Estevam
- [U-Boot] [PATCH 3/6] udoo_neo: Staticize board_string()
Fabio Estevam
- [U-Boot] [PATCH 4/6] udoo_neo: Remove mmcautodetect option
Fabio Estevam
- [U-Boot] [PATCH 5/6] udoo_neo: Remove console option
Fabio Estevam
- [U-Boot] [PATCH 6/6] udoo_neo: Add thermal support
Fabio Estevam
- [U-Boot] [PATCH v3 10/13] i2c: Kconfig: Add SYS_I2C_MXC entry
Fabio Estevam
- [U-Boot] [PATCH 1/3] mx6qsabreauto: Configure the WEIM controller like the kernel
Fabio Estevam
- [U-Boot] [PATCH 2/3] mx6qsabreauto: Pass the correct parallel NOR width
Fabio Estevam
- [U-Boot] [PATCH 3/3] mx6: Select CONFIG_USE_ARCH_MEMCPY
Fabio Estevam
- [U-Boot] [RFC] cmd: mem: Allow 'cp' to use the optimized memcpy
Fabio Estevam
- [U-Boot] [PATCH v2 1/4] mx6qsabreauto: Configure the WEIM controller like the kernel
Fabio Estevam
- [U-Boot] [PATCH v2 2/4] mx6qsabreauto: Pass the correct parallel NOR width
Fabio Estevam
- [U-Boot] [PATCH v2 3/4] Kconfig: Move USE_ARCH_MEMCPY/MEMSET to Kconfig
Fabio Estevam
- [U-Boot] [PATCH v2 4/4] cmd: mem: Use memcpy for 'cp' command
Fabio Estevam
- [U-Boot] [PATCH v3] Kconfig: Move USE_ARCH_MEMCPY/MEMSET to Kconfig
Fabio Estevam
- [U-Boot] [PATCH] cmd/Kconfig: Fix typo in CMD_MEMORY help text
Fabio Estevam
- [U-Boot] [PATCH] udoo_neo: Use 'fdtfile' variable name
Fabio Estevam
- [U-Boot] [PATCH] udoo_neo: Remove USDHC3 entry
Fabio Estevam
- [U-Boot] [PATCH] ARM: imx7s-warp: enable USB gadget ethernet
Fabio Estevam
- [U-Boot] [PATCH v3] Kconfig: Move USE_ARCH_MEMCPY/MEMSET to Kconfig
Fabio Estevam
- [U-Boot] [PATCH 1/3] ARM: revive CONFIG_USE_ARCH_MEMCPY/MEMSET for UniPhier and Tegra
Fabio Estevam
- [U-Boot] [PATCH 2/3] common/init: remove meaningless defined(CONFIG_USE_ARCH_MEMSET)
Fabio Estevam
- [U-Boot] [PATCH 3/3] README: remove description about CONFIG_USE_ARCH_MEMCPY/SET
Fabio Estevam
- [U-Boot] [PATCH v2 4/4] cmd: mem: Use memcpy for 'cp' command
Fabio Estevam
- [U-Boot] driver micrel ksz8873 in U-BOOT
Fabio Estevam
- [U-Boot] [PATCH 11/18] wdog: Add the watchdog driver for MX7ULP.
Fabio Estevam
- [U-Boot] [PATCH 17/18] imx: imx7ulp: add EVK board support
Fabio Estevam
- [U-Boot] [PATCH] udoo_neo: Use 'fdtfile' variable name
Fabio Estevam
- [U-Boot] [PATCH 14/18] serial: Add support for i.MX7ULP
Fabio Estevam
- [U-Boot] [PATCH 18/18] imx: mx7ulp_evk: enable mmc/regulator support
Fabio Estevam
- [U-Boot] [PATCH] mx6qsabreauto: Fix the EIM clock for the mx6qp variant
Fabio Estevam
- [U-Boot] [PATCH 17/18] imx: imx7ulp: add EVK board support
Fabio Estevam
- [U-Boot] [PATCH V2 20/20] imx: mx7ulp_evk: enable mmc/regulator support
Fabio Estevam
- [U-Boot] [PATCH] imx: thermal: Kconfig: add MX7
Peng Fan
- [U-Boot] [PATCH V2 00/19] imx: add i.MX6SLL support
Peng Fan
- [U-Boot] [PATCH V2 01/19] imx: add i.MX 6SLL CPU type
Peng Fan
- [U-Boot] [PATCH V2 02/19] imx: mx6sll: add pinmux header files
Peng Fan
- [U-Boot] [PATCH V2 03/19] imx: mx6sll: update register address
Peng Fan
- [U-Boot] [PATCH V2 04/19] imx-common: timer: add i.MX6SLL support
Peng Fan
- [U-Boot] [PATCH V2 05/19] imx: mx6sll: add iomux settings
Peng Fan
- [U-Boot] [PATCH V2 06/19] imx: mx6: fix mmdc ch0 clk for 6SL
Peng Fan
- [U-Boot] [PATCH V2 07/19] imx: mx6: lcdif: gate clock before changing mux
Peng Fan
- [U-Boot] [PATCH V2 08/19] imx: mx6sl: add lcdif clock support
Peng Fan
- [U-Boot] [PATCH V2 09/19] imx: clock: gate clk before changing pix clk mux
Peng Fan
- [U-Boot] [PATCH V2 10/19] imx: mx6sll: add clock support
Peng Fan
- [U-Boot] [PATCH V2 11/19] imx-common: cache: configure L2 Cache for i.MX6SLL
Peng Fan
- [U-Boot] [PATCH V2 12/19] imx: mx6sll: add Kconfig entry for i.MX6SLL
Peng Fan
- [U-Boot] [PATCH V2 13/19] mx6_common: correct loadaddr and text base for i.MX6SLL
Peng Fan
- [U-Boot] [PATCH V2 14/19] OCOTP: Update OCOTP driver to support i.MX6SLL
Peng Fan
- [U-Boot] [PATCH V2 15/19] imx-common: lcdif: update lcdif regs for i.MX6SL/SLL
Peng Fan
- [U-Boot] [PATCH V2 16/19] pinctrl: imx6: support i.MX6SLL
Peng Fan
- [U-Boot] [PATCH V2 17/19] arm: dts: add i.MX6SLL device tree
Peng Fan
- [U-Boot] [PATCH V2 18/19] arm: imx: add i.MX6SLL EVK board support
Peng Fan
- [U-Boot] [PATCH V2 19/19] imx: mx6sllevk: add plugin support
Peng Fan
- [U-Boot] [PATCH 1/3] usb: ehci-mx6: implement ofdata_to_platdata
Peng Fan
- [U-Boot] [PATCH 2/3] usb: ehci-mx6: handle vbus-supply
Peng Fan
- [U-Boot] [PATCH 3/3] imx: mx6sllevk: add usb support
Peng Fan
- [U-Boot] [PATCH 3/3] imx: mx6sllevk: add usb support
Peng Fan
- [U-Boot] [PATCH 3/3] imx: mx6sllevk: add usb support
Peng Fan
- [U-Boot] [PATCH 1/3] usb: ehci-mx6: implement ofdata_to_platdata
Peng Fan
- [U-Boot] [PATCH 3/3] imx: mx6sllevk: add usb support
Peng Fan
- [U-Boot] [PATCH 3/3] imx: mx6sllevk: add usb support
Peng Fan
- [U-Boot] [PATCH 3/3] imx: mx6sllevk: add usb support
Peng Fan
- [U-Boot] [PATCH 3/3] imx: mx6sllevk: add usb support
Peng Fan
- [U-Boot] [PATCH 3/3] imx: mx6sllevk: add usb support
Peng Fan
- [U-Boot] [PATCH V2 1/3] usb: ehci-mx6: implement ofdata_to_platdata
Peng Fan
- [U-Boot] [PATCH V2 2/3] usb: ehci-mx6: handle vbus-supply
Peng Fan
- [U-Boot] [PATCH V2 3/3] imx: mx6sllevk: add usb support
Peng Fan
- [U-Boot] [PATCH 00/18] imx: add i.MX7ULP support
Peng Fan
- [U-Boot] [PATCH 01/18] imx: mx7ulp: Add mx7ulp to Kconfig
Peng Fan
- [U-Boot] [PATCH 02/18] imx: mx7ulp: add registers header file
Peng Fan
- [U-Boot] [PATCH 03/18] imx: mx7ulp: add iomux driver to support IOMUXC0 and IOMUXC1
Peng Fan
- [U-Boot] [PATCH 04/18] imx: mx7ulp: Add clock framework and functions
Peng Fan
- [U-Boot] [PATCH 05/18] imx: mx7ulp: Add soc level initialization codes and functions
Peng Fan
- [U-Boot] [PATCH 06/18] imx: mx7ulp: handle all the lpuarts in get_lpuart_clk
Peng Fan
- [U-Boot] [PATCH 07/18] imx: mx7ulp: Implement the clock functions for i2c driver
Peng Fan
- [U-Boot] [PATCH 08/18] gpio: Add Rapid GPIO2P driver for i.MX7ULP
Peng Fan
- [U-Boot] [PATCH 09/18] mxc_ocotp: Update driver to support OCOTP controller on i.MX7ULP
Peng Fan
- [U-Boot] [PATCH 10/18] mx7ulp: Add iomux pins header file
Peng Fan
- [U-Boot] [PATCH 11/18] wdog: Add the watchdog driver for MX7ULP.
Peng Fan
- [U-Boot] [PATCH 12/18] pinctrl: Add i.MX7ULP pinctrl driver
Peng Fan
- [U-Boot] [PATCH 13/18] i2c: lpi2c: add lpi2c driver for i.MX7ULP
Peng Fan
- [U-Boot] [PATCH 14/18] serial: Add support for i.MX7ULP
Peng Fan
- [U-Boot] [PATCH 15/18] arm: dts: add i.MX7ULP dtsi file
Peng Fan
- [U-Boot] [PATCH 16/18] mmc: fsl_esdhc: support i.MX7ULP
Peng Fan
- [U-Boot] [PATCH 17/18] imx: imx7ulp: add EVK board support
Peng Fan
- [U-Boot] [PATCH 18/18] imx: mx7ulp_evk: enable mmc/regulator support
Peng Fan
- [U-Boot] [PATCH 18/18] imx: mx7ulp_evk: enable mmc/regulator support
Peng Fan
- [U-Boot] [PATCH 14/18] serial: Add support for i.MX7ULP
Peng Fan
- [U-Boot] [PATCH 17/18] imx: imx7ulp: add EVK board support
Peng Fan
- [U-Boot] [PATCH 11/18] wdog: Add the watchdog driver for MX7ULP.
Peng Fan
- [U-Boot] [PATCH] mx6qsabreauto: Fix the EIM clock for the mx6qp variant
Peng Fan
- [U-Boot] [PATCH 17/18] imx: imx7ulp: add EVK board support
Peng Fan
- [U-Boot] [PATCH V2 00/20] imx: add i.MX7ULP support
Peng Fan
- [U-Boot] [PATCH V2 01/20] imx: mx7ulp: Add mx7ulp to Kconfig
Peng Fan
- [U-Boot] [PATCH V2 02/20] imx: mx7ulp: add registers header file
Peng Fan
- [U-Boot] [PATCH V2 03/20] imx: mx7ulp: add iomux driver to support IOMUXC0 and IOMUXC1
Peng Fan
- [U-Boot] [PATCH V2 04/20] imx: mx7ulp: Add clock framework and functions
Peng Fan
- [U-Boot] [PATCH V2 05/20] imx: mx7ulp: Add soc level initialization codes and functions
Peng Fan
- [U-Boot] [PATCH V2 06/20] imx: mx7ulp: handle all the lpuarts in get_lpuart_clk
Peng Fan
- [U-Boot] [PATCH V2 07/20] imx: mx7ulp: Implement the clock functions for i2c driver
Peng Fan
- [U-Boot] [PATCH V2 08/20] gpio: Add Rapid GPIO2P driver for i.MX7ULP
Peng Fan
- [U-Boot] [PATCH V2 09/20] mxc_ocotp: Update driver to support OCOTP controller on i.MX7ULP
Peng Fan
- [U-Boot] [PATCH V2 10/20] mx7ulp: Add iomux pins header file
Peng Fan
- [U-Boot] [PATCH V2 11/20] wdog: Add the watchdog driver for MX7ULP.
Peng Fan
- [U-Boot] [PATCH V2 12/20] pinctrl: Add i.MX7ULP pinctrl driver
Peng Fan
- [U-Boot] [PATCH V2 13/20] i2c: lpi2c: add lpi2c driver for i.MX7ULP
Peng Fan
- [U-Boot] [PATCH V2 14/20] serial: lpuart: restructure lpuart driver
Peng Fan
- [U-Boot] [PATCH V2 15/20] serial: lpuart: add i.MX7ULP support
Peng Fan
- [U-Boot] [PATCH V2 16/20] mx7ulp: Add HAB boot support
Peng Fan
- [U-Boot] [PATCH V2 17/20] arm: dts: add i.MX7ULP dtsi file
Peng Fan
- [U-Boot] [PATCH V2 18/20] mmc: fsl_esdhc: support i.MX7ULP
Peng Fan
- [U-Boot] [PATCH V2 19/20] imx: imx7ulp: add EVK board support
Peng Fan
- [U-Boot] [PATCH V2 20/20] imx: mx7ulp_evk: enable mmc/regulator support
Peng Fan
- [U-Boot] [PATCH V2 20/20] imx: mx7ulp_evk: enable mmc/regulator support
Peng Fan
- [U-Boot] [PATCH] imx: mx6sllevk: add MAINTAINERS file
Peng Fan
- [U-Boot] build uboot error
Wenming Feng
- [U-Boot] [PATCH] zynq: spi: Honour the activation / deactivation delay
Moritz Fischer
- [U-Boot] [PATCH 01/12] ARM: dt: zynq: Add labels to cpu nodes to allow overriding OPPs.
Moritz Fischer
- [U-Boot] [PATCH v2] ARM: dt: zynq: Add labels to cpu nodes to allow overriding OPPs.
Moritz Fischer
- [U-Boot] [PATCH] zynq: spi: Honour the activation / deactivation delay
Moritz Fischer
- [U-Boot] [PATCH] zynq: spi: Honour the activation / deactivation delay
Moritz Fischer
- [U-Boot] [PATCH 2/4] ARM: zynq: Remove spi-max-frequency
Moritz Fischer
- [U-Boot] [PATCH] ARM64: zynqmp: Fix i2c node's compatible string
Moritz Fischer
- [U-Boot] [PATCH] ARM64: zynqmp: Fix i2c node's compatible string
Moritz Fischer
- [U-Boot] [PATCH 1/2] i2c: cdns: Add additional compatible string for r1p14 of the IP.
Moritz Fischer
- [U-Boot] [PATCH 2/2] ARM64: zynqmp: Fix i2c node's compatible string
Moritz Fischer
- [U-Boot] [PATCH 1/4] i2c: i2c-cdns: Detect unsupported sequences for rev 1.0
Moritz Fischer
- [U-Boot] [PATCH 2/4] i2c: i2c-cdns: Reorder timeout loop for interrupt waiting
Moritz Fischer
- [U-Boot] [PATCH 3/4] i2c: i2c-cdns: Implement workaround for hold quirk of the rev 1.0
Moritz Fischer
- [U-Boot] [PATCH 4/4] i2c: i2c-cdns: No need for dedicated probe function
Moritz Fischer
- [U-Boot] [PATCH] i2c: mux: Allow muxes to work as children of i2c bus without i2c-parent
Moritz Fischer
- [U-Boot] [PATCH 01/10] ARM:dts: Added device tree for socfpga arria10 development kit sdmmc
Chee Tien Fong
- [U-Boot] [PATCH 01/10] ARM:dts: Added device tree for socfpga arria10 development kit sdmmc
Chee Tien Fong
- [U-Boot] [PATCH 02/10] arm: socfpga: arria10: Added config option build for SPL
Chee Tien Fong
- [U-Boot] [PATCH 03/10] arm: socfpga: arria10: Enhanced socfpga_arria10_defconfig to support SPL
Chee Tien Fong
- [U-Boot] [PATCH 04/10] arm: socfpga: arria10: Added clock manager and pin mux compat macro
Chee Tien Fong
- [U-Boot] [PATCH 05/10] arm: socfpga: arria10: Added support for Arria 10 SoC dev kit
Chee Tien Fong
- [U-Boot] [PATCH 06/10] arm: socfpga: arria10: Added drivers for Arria10 Reset Manager
Chee Tien Fong
- [U-Boot] [PATCH 07/10] arm: socfpga: arria10: Added miscellaneous drivers for Arria10
Chee Tien Fong
- [U-Boot] [PATCH 08/10] arm: socfpga: arria10: Added drivers for Arria10 clock manager
Chee Tien Fong
- [U-Boot] [PATCH 09/10] arm: socfpga: arria10: Added drivers for Arria10 pin mux/pins configuration
Chee Tien Fong
- [U-Boot] [PATCH 10/10] arm: socfpga: arria10: Added Arria10 critical HW initialization to spl
Chee Tien Fong
- [U-Boot] [PATCH v2 01/30] arm: socfpga: arria10: add additional i2c nodes for Arria10
Chee Tien Fong
- [U-Boot] [PATCH v2 02/30] arm: socfpga: arria10: add sdram defines for Arria10
Chee Tien Fong
- [U-Boot] [PATCH v2 03/30] arm: socfpga: arria10: add board files for the Arria10 SoCDK
Chee Tien Fong
- [U-Boot] [PATCH v2 04/30] arm: socfpga: arria10: add system manager defines
Chee Tien Fong
- [U-Boot] [PATCH v2 05/30] arm: socfpga: arria10: add misc functions for Arria10
Chee Tien Fong
- [U-Boot] [PATCH v2 06/30] arm: socfpga: arria10: add socfpga_arria10_socdk config
Chee Tien Fong
- [U-Boot] [PATCH v2 07/30] arm: socfpga: arria10: add socfpga_arria10_defconfig
Chee Tien Fong
- [U-Boot] [PATCH v2 08/30] arm: socfpga: arria10: add config option build for arria10
Chee Tien Fong
- [U-Boot] [PATCH v2 09/30] arm: socfpga: add define for bootinfo bsel bit shift
Chee Tien Fong
- [U-Boot] [PATCH v2 10/30] arm: socfpga: arria10: add reset manager for Arria10
Chee Tien Fong
- [U-Boot] [PATCH v2 11/30] arm: socfpga: wrap system manager functions for A5/C5 devices
Chee Tien Fong
- [U-Boot] [PATCH v2 12/30] arm: socfpga: arria10: don't build GEN5 sdram for arria10
Chee Tien Fong
- [U-Boot] [PATCH v2 13/30] arm: socfpga: arria10 fpga does not have bridges mapped
Chee Tien Fong
- [U-Boot] [PATCH v2 14/30] arm: socfpga: arria10: remove board_init and s_init
Chee Tien Fong
- [U-Boot] [PATCH v2 15/30] arm: socfpga: combine clrbits/setbits into a single clrsetbits
Chee Tien Fong
- [U-Boot] [PATCH v2 16/30] arm: socfpga: add reset manager defines for Arria10
Chee Tien Fong
- [U-Boot] [PATCH v2 17/30] arm: socfpga: arria10: update dwmac reset function to support Arria10
Chee Tien Fong
- [U-Boot] [PATCH v2 18/30] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address
Chee Tien Fong
- [U-Boot] [PATCH v2 19/30] ARM:dts: Added device tree for socfpga arria10 development kit sdmmc
Chee Tien Fong
- [U-Boot] [PATCH v2 20/30] arm: socfpga: arria10: Enable SPL for Arria 10
Chee Tien Fong
- [U-Boot] [PATCH v2 21/30] arm: socfpga: arria10: Enhanced socfpga_arria10_defconfig to support SPL
Chee Tien Fong
- [U-Boot] [PATCH v2 22/30] arm: socfpga: arria10: Added clock manager and pin mux compat macro
Chee Tien Fong
- [U-Boot] [PATCH v2 23/30] arm: socfpga: arria10: Added some hardware base address for Arria 10
Chee Tien Fong
- [U-Boot] [PATCH v2 24/30] arm: socfpga: arria10: Added support for Arria 10 socdk
Chee Tien Fong
- [U-Boot] [PATCH v2 25/30] arm: socfpga: arria10: Added drivers for Arria10 Reset Manager
Chee Tien Fong
- [U-Boot] [PATCH v2 26/30] arm: socfpga: arria10: Added miscellaneous drivers for Arria 10
Chee Tien Fong
- [U-Boot] [PATCH v2 27/30] arm: socfpga: arria10: Added drivers for Arria10 clock manager
Chee Tien Fong
- [U-Boot] [PATCH v2 28/30] arm: socfpga: arria10: Added drivers for Arria10 pinmux/pins configuration
Chee Tien Fong
- [U-Boot] [PATCH v2 29/30] arm: socfpga: arria10: Added Arria10 critical HW initialization to spl
Chee Tien Fong
- [U-Boot] [PATCH v2 30/30] arm: socfpga: arria10: Enable fpga driver build for SPL.
Chee Tien Fong
- [U-Boot] [PATCH v2 01/30] arm: socfpga: arria10: add additional i2c nodes for Arria10
Chee Tien Fong
- [U-Boot] [PATCH v2 02/30] arm: socfpga: arria10: add sdram defines for Arria10
Chee Tien Fong
- [U-Boot] [PATCH v2 03/30] arm: socfpga: arria10: add board files for the Arria10 SoCDK
Chee Tien Fong
- [U-Boot] [PATCH v2 04/30] arm: socfpga: arria10: add system manager defines
Chee Tien Fong
- [U-Boot] [PATCH v2 05/30] arm: socfpga: arria10: add misc functions for Arria10
Chee Tien Fong
- [U-Boot] [PATCH v2 06/30] arm: socfpga: arria10: add socfpga_arria10_socdk config
Chee Tien Fong
- [U-Boot] [PATCH v2 07/30] arm: socfpga: arria10: add socfpga_arria10_defconfig
Chee Tien Fong
- [U-Boot] [PATCH v2 08/30] arm: socfpga: arria10: add config option build for arria10
Chee Tien Fong
- [U-Boot] [PATCH v2 09/30] arm: socfpga: add define for bootinfo bsel bit shift
Chee Tien Fong
- [U-Boot] [PATCH v2 10/30] arm: socfpga: arria10: add reset manager for Arria10
Chee Tien Fong
- [U-Boot] [PATCH v2 11/30] arm: socfpga: wrap system manager functions for A5/C5 devices
Chee Tien Fong
- [U-Boot] [PATCH v2 12/30] arm: socfpga: arria10: don't build GEN5 sdram for arria10
Chee Tien Fong
- [U-Boot] [PATCH v2 13/30] arm: socfpga: arria10 fpga does not have bridges mapped
Chee Tien Fong
- [U-Boot] [PATCH v2 14/30] arm: socfpga: arria10: remove board_init and s_init
Chee Tien Fong
- [U-Boot] [PATCH v2 15/30] arm: socfpga: combine clrbits/setbits into a single clrsetbits
Chee Tien Fong
- [U-Boot] [PATCH v2 16/30] arm: socfpga: add reset manager defines for Arria10
Chee Tien Fong
- [U-Boot] [PATCH v2 17/30] arm: socfpga: arria10: update dwmac reset function to support Arria10
Chee Tien Fong
- [U-Boot] Question re vendor check in drivers/pci/pci.c
Gregory Fong
- [U-Boot] [PATCH] ARM: OMAP3_LOGIC: Remove ONENAND config options
Adam Ford
- [U-Boot] [PATCH] OMAP3: omap3_logic: Remove display parameter
Adam Ford
- [U-Boot] genext2fs fix for supporting filesystems generated by genext2fs
FrostyBytes
- [U-Boot] [PATCH 1/2] armv8: calculate __bss_size in u-boot-spl.lds
Oded Gabbay
- [U-Boot] [PATCH 2/2] armv8: add asserts of sizes to u-boot-spl.lds
Oded Gabbay
- [U-Boot] [PATCH] armv8: fix #if around spin-table code in start.S
Oded Gabbay
- [U-Boot] [PATCH] spl: don't use %.*s with CONFIG_USE_TINY_PRINTF
Oded Gabbay
- [U-Boot] [PATCH] spl: don't use %#l with CONFIG_USE_TINY_PRINTF
Oded Gabbay
- [U-Boot] [PATCH] armv8: release slave cores from CPU_RELEASE_ADDR
Oded Gabbay
- [U-Boot] [PATCH v5 10/13] tegra: Use a U-Boot-specific .dtsi file
Simon Glass
- [U-Boot] [PATCH v2] dm: core: Add dev_get_addr_size_index() to retrieve addr and size
Simon Glass
- [U-Boot] [PATCH v3 1/1] cmd: pci: add option to parse and display BAR information
Simon Glass
- [U-Boot] [PATCHv3 09/15] pci: layerscape: add pci driver based on DM
Simon Glass
- [U-Boot] Please assign custodian for: u-boot-pmic / maintainers for: Samsung boards
Simon Glass
- [U-Boot] [PATCH v1 1/5] common: scsi: Remove completely unused functions
Simon Glass
- [U-Boot] [PATCH v1 2/5] common: scsi: Make private functions static
Simon Glass
- [U-Boot] [PATCH v1 3/5] cmd: scsi: Make private functions static
Simon Glass
- [U-Boot] [PATCH v1 4/5] scsi: Change scsi_scan() to be able to return value
Simon Glass
- [U-Boot] [PATCH v1 5/5] scsi: Separate SCSI private block description initialization
Simon Glass
- [U-Boot] [PATCH v3 1/2] dm: Add support for scsi/sata based devices
Simon Glass
- [U-Boot] [PATCH 12/14] fdt: eth_fixup: Add hook for board to override MAC
Simon Glass
- [U-Boot] uefi: x86: uboot as uefi payload
Simon Glass
- [U-Boot] [PATCH v3 0/9] From Simon:
Simon Glass
- [U-Boot] [PATCH] disk: convert to Kconfig
Simon Glass
- [U-Boot] [PATCH 1/5] arm: tegra: initial support for apalis tk1
Simon Glass
- [U-Boot] [PATCH 2/5] mmc: tegra: introduce CONFIG_TEGRA_MMC to Kconfig
Simon Glass
- [U-Boot] [PATCH 3/5] mmc: tegra: move CONFIG_TEGRA_MMC from headers to defconfigs
Simon Glass
- [U-Boot] [PATCH 4/5] mmc: tegra: allow disabling external clock loopback
Simon Glass
- [U-Boot] [PATCH v2] rtc: Add RTC chip pcf2127 support
Simon Glass
- [U-Boot] [RFC PATCH v2 1/8] uuid: add function for GUID string parsing
Simon Glass
- [U-Boot] [RFC PATCH v2 2/8] disk: part: refactor to prepare GPT over MTD
Simon Glass
- [U-Boot] [RFC PATCH v2 3/8] disk: part: add support of GPT partitioning over MTD
Simon Glass
- [U-Boot] [RFC PATCH v2 4/8] cmd: gpt: update command to support GPT over MTD
Simon Glass
- [U-Boot] [RFC PATCH v2 5/8] cmd: part: update command to support GPT over MTD
Simon Glass
- [U-Boot] [RFC PATCH v2 6/8] cmd: mtdparts: update command to support GPT over MTD
Simon Glass
- [U-Boot] [RFC PATCH v2 8/8] sandbox: GPT over MTD test
Simon Glass
- [U-Boot] Please assign custodian for: u-boot-pmic / maintainers for: Samsung boards
Simon Glass
- [U-Boot] [PATCH v3] rtc: Add RTC chip pcf2127 support
Simon Glass
- [U-Boot] [PATCH 01/13] serial: 16550: Add getfcr accessor
Simon Glass
- [U-Boot] [PATCH 03/13] serial: 16550: Add Ingenic JZ4780 support
Simon Glass
- [U-Boot] [PATCH 12/15 v2] pci: mvebu: Add PCIe driver for Armada-8K
Simon Glass
- [U-Boot] [PATCH resend v3 1/6] drivers: usb: gadget: ether: adopt to usb driver model
Simon Glass
- [U-Boot] [PATCH resend v3 2/6] drivers: usb: gadget: ether: access network_started using local variable
Simon Glass
- [U-Boot] [PATCH resend v3 3/6] drivers: usb: gadget: ether: consolidate global devices to single struct
Simon Glass
- [U-Boot] [PATCH resend v3 4/6] drivers: usb: gadget: ether: use net device priv to pass usb ether priv
Simon Glass
- [U-Boot] [PATCH resend v3 5/6] drivers: usb: gadget: ether: prepare driver for driver model migration
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH v3] usb: dwc2: add support for external vbus supply
Simon Glass
- [U-Boot] [PATCH v2 1/4] usb: dwc2: add support for external vbus supply
Simon Glass
- [U-Boot] [PATCH v2 1/3] rockchip: configs: correct env offset when enable CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
Simon Glass
- [U-Boot] [PATCH v2 2/3] rockchip: configs: make rk3036 env config same as rk3288
Simon Glass
- [U-Boot] [PATCH v2 2/4] board: popmetal: de-assert the host rst pin in board init
Simon Glass
- [U-Boot] [PATCH v2 3/4] config: popmetal: enable the USB host controller and function
Simon Glass
- [U-Boot] [PATCH v4 0/9] rockchip: Add gmac Ethernet support
Simon Glass
- [U-Boot] [PATCH v4 1/9] net: designware: Export various functions/struct to allow subclassing
Simon Glass
- [U-Boot] [PATCH v4 2/9] net: designware: Adjust dw_adjust_link() to return an error
Simon Glass
- [U-Boot] [PATCH v4 3/9] net: designware: Split the link init into a separate function
Simon Glass
- [U-Boot] [PATCH v4 4/9] net: designware: Export the operation functions
Simon Glass
- [U-Boot] [PATCH v4 5/9] net: gmac_rk3288: Add RK3288 GMAC driver
Simon Glass
- [U-Boot] [PATCH v4 6/9] rockchip: Enable networking support on rock2 and firefly
Simon Glass
- [U-Boot] [PATCH v4 7/9] rockchip: evb-rk3339: Enable DHCP
Simon Glass
- [U-Boot] [PATCH v4 8/9] rockchip: Add PXE and DHCP to the default boot targets
Simon Glass
- [U-Boot] [PATCH v4 9/9] rockchip: Drop Ethernet from the TODO
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] Please pull u-boot-dm (take 2)
Simon Glass
- [U-Boot] [PATCH v3] usb: dwc2: add support for external vbus supply
Simon Glass
- [U-Boot] [PATCH 12/15 v2] pci: mvebu: Add PCIe driver for Armada-8K
Simon Glass
- [U-Boot] [PATCH v3] rtc: Add RTC chip pcf2127 support
Simon Glass
- [U-Boot] [PATCH v2] dm: core: Add dev_get_addr_size_index() to retrieve addr and size
Simon Glass
- [U-Boot] [PATCH v3] libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORY
Simon Glass
- [U-Boot] [PATCH] cmd/fdt: fix uncallable systemsetup command
Simon Glass
- [U-Boot] [PATCH v3 01/10] configs: am335x: usb: do not define CONFIG_DM_USB for spl
Simon Glass
- [U-Boot] [PATCH v3 02/10] am33xx: board: do not register usb devices when CONFIG_DM_USB is defined
Simon Glass
- [U-Boot] [PATCH v3 03/10] drivers: usb: musb: add ti musb misc driver for wrapper
Simon Glass
- [U-Boot] [PATCH v3 04/10] am33xx: board: probe misc drivers to register musb devices
Simon Glass
- [U-Boot] [PATCH v3 05/10] drivers: usb: musb: adopt musb backend driver to driver model
Simon Glass
- [U-Boot] [PATCH v3 06/10] drivers: usb: musb: add ti musb host driver with driver model support
Simon Glass
- [U-Boot] [PATCH v2] cmd: crosec: Move cros_ec_decode_region helper to cmd/cros_ec.c
Simon Glass
- [U-Boot] [PATCH v3 07/10] drivers: usb: musb: add ti musb peripheral driver with driver model support
Simon Glass
- [U-Boot] [PATCH 4/5] mmc: tegra: allow disabling external clock loopback
Simon Glass
- [U-Boot] [PATCH 07/17] lib: tpm: Add command to flush resources
Simon Glass
- [U-Boot] [PATCH 06/17] dm: Add callback to modify the device tree
Simon Glass
- [U-Boot] [PATCH v1] dm: spl: mmc: Fix EXT SPL support
Simon Glass
- [U-Boot] uefi: x86: uboot as uefi payload
Simon Glass
- [U-Boot] About U-boot's TPM
Simon Glass
- [U-Boot] [PATCH v3 1/2] splash: sort include files
Simon Glass
- [U-Boot] [PATCH v3 2/2] splash: add support for loading splash from a FIT image
Simon Glass
- [U-Boot] [PATCH v3] spi: Add error checking for invalid bus widths
Simon Glass
- [U-Boot] [PATCH v4 1/1] cmd: pci: add option to parse and display BAR information
Simon Glass
- [U-Boot] [PATCH 12/14] fdt: eth_fixup: Add hook for board to override MAC
Simon Glass
- [U-Boot] [PATCH v5 10/13] tegra: Use a U-Boot-specific .dtsi file
Simon Glass
- [U-Boot] [PATCH] ARM: tegra: allow passing cboot DTB to the kernel
Simon Glass
- [U-Boot] [PATCH v2 3/6] arm64: mvebu: pinctrl: Add pin control driver for A8K family
Simon Glass
- [U-Boot] [PATCH v2 02/23] armv8: prevent using THUMB
Simon Glass
- [U-Boot] [PATCH v2 01/23] sun6i: Restrict some register initialization to Allwinner A31 SoC
Simon Glass
- [U-Boot] [PATCH v2 04/23] SPL: tiny-printf: add "l" modifier
Simon Glass
- [U-Boot] [PATCH v2 11/23] sunxi: A64: do an RMR switch if started in AArch32 mode
Simon Glass
- [U-Boot] [PATCH v2 05/23] move UL() macro from armv8/mmu.h into common.h
Simon Glass
- [U-Boot] [PATCH v2 06/23] SPL: make struct spl_image 64-bit safe
Simon Glass
- [U-Boot] [PATCH v2 07/23] armv8: add simple sdelay implementation
Simon Glass
- [U-Boot] [PATCH v2 08/23] armv8: move reset branch into boot hook
Simon Glass
- [U-Boot] [PATCH v2 09/23] ARM: boot0 hook: remove macro, include whole header file
Simon Glass
- [U-Boot] [PATCH v2 10/23] sunxi: introduce extra config option for boot0 header
Simon Glass
- [U-Boot] [PATCH v2 12/23] sunxi: provide default DRAM config for sun50i in Kconfig
Simon Glass
- [U-Boot] [PATCH v2 13/23] sunxi: H3: add and rename some DRAM contoller registers
Simon Glass
- [U-Boot] [PATCH v2 14/23] sunxi: H3: add DRAM controller single bit delay support
Simon Glass
- [U-Boot] [PATCH v2 15/23] sunxi: A64: use H3 DRAM initialization code for A64
Simon Glass
- [U-Boot] [PATCH v2 16/23] sunxi: H3/A64: fix non-ODT setting
Simon Glass
- [U-Boot] [PATCH v2 17/23] sunxi: DRAM: fix H3 DRAM size display on aarch64
Simon Glass
- [U-Boot] [PATCH v2 18/23] sunxi: A64: enable SPL
Simon Glass
- [U-Boot] [PATCH v2 22/23] sunxi: introduce RMR switch to enter payloads in 64-bit mode
Simon Glass
- [U-Boot] [PATCH v2 23/23] sunxi: A64: add 32-bit SPL support
Simon Glass
- [U-Boot] [PATCH v2 03/23] armv8: add lowlevel_init.S
Simon Glass
- [U-Boot] [PATCH v4 1/2] splash: sort include files
Simon Glass
- [U-Boot] [PATCH v4 2/2] splash: add support for loading splash from a FIT image
Simon Glass
- [U-Boot] [PATCH 12/14] fdt: eth_fixup: Add hook for board to override MAC
Simon Glass
- [U-Boot] [PATCH v3 3/6] arm64: mvebu: pinctrl: Add pin control driver for A8K family
Simon Glass
- [U-Boot] [PATCH 06/17] dm: Add callback to modify the device tree
Simon Glass
- [U-Boot] uefi: x86: uboot as uefi payload
Simon Glass
- [U-Boot] [PATCH v2 1/2] test/py: Allow to pass u_boot_log instead of console for run_and_log
Simon Glass
- [U-Boot] [PATCH v2 2/2] test/py: Create tests for ext4 and fat testing on sandbox
Simon Glass
- [U-Boot] [PATCH v2 1/4] Introduce CONFIG_SPL_ABORT_ON_NON_FIT_IMAGE
Simon Glass
- [U-Boot] Rockchip RK3288 u-boot with mainline kernel
Simon Glass
- [U-Boot] [PATCHv4 09/16] pci: layerscape: add pci driver based on DM
Simon Glass
- [U-Boot] [PATCHv4 15/16] pci: layerscape: remove unnecessary legacy code
Simon Glass
- [U-Boot] [PATCH v2 14/23] sunxi: H3: add DRAM controller single bit delay support
Simon Glass
- [U-Boot] Use of QEMU UEFI payland with persistent environment
Simon Glass
- [U-Boot] Use of QEMU UEFI payland with persistent environment
Simon Glass
- [U-Boot] [PATCH 12/14] fdt: eth_fixup: Add hook for board to override MAC
Simon Glass
- [U-Boot] [PATCH v2 08/23] armv8: move reset branch into boot hook
Simon Glass
- [U-Boot] [PATCH] miniarm-rk3288: set isp/vop qos priority level
Simon Glass
- [U-Boot] [PATCH v3 3/6] arm64: mvebu: pinctrl: Add pin control driver for A8K family
Simon Glass
- [U-Boot] [PATCH] regulator: fixed: Add support to handle enable-active-high DT property
Simon Glass
- [U-Boot] [PATCH] Makefile: Fix linking with modern binutils
Simon Glass
- [U-Boot] [PATCH RESEND 7/9] video: Allow board hook before video init
Simon Glass
- [U-Boot] [PATCH] zynq: spi: Honour the activation / deactivation delay
Simon Glass
- [U-Boot] [PATCH v2] miniarm-rk3288: set isp/vop qos priority level
Simon Glass
- [U-Boot] [PATCH 12/14] fdt: eth_fixup: Add hook for board to override MAC
Simon Glass
- [U-Boot] [PATCH 1/5] pmic: pmic_mc34vr500: Add a driver for the mc34vr500 pmic
Simon Glass
- [U-Boot] [RFC v2 1/3] drivers: dma: Add the ARM PL330 DMA driver
Simon Glass
- [U-Boot] [PATCH 1/2] common: miiphyutil: Add helper function for mdio bus name
Simon Glass
- [U-Boot] [PATCH v2 1/2] test/py: Allow to pass u_boot_log instead of console for run_and_log
Simon Glass
- [U-Boot] [PATCH 1/3] fdt: add memory bank decoding functions for board setup
Simon Glass
- [U-Boot] [PATCH v4 2/2] splash: add support for loading splash from a FIT image
Simon Glass
- [U-Boot] Rockchip RK3288 regulator device table problem
Simon Glass
- [U-Boot] [PATCH] ARM: dts: tegra: Sync paz00 with Linux 4.8
Simon Glass
- [U-Boot] [RFC PATCH 0/3] sunxi: video: Add support for HDMI output on H3
Simon Glass
- [U-Boot] [PATCH v4 2/2] splash: add support for loading splash from a FIT image
Simon Glass
- [U-Boot] [PATCH 00/29] blackfin: Add driver-model and device tree suport
Simon Glass
- [U-Boot] [PATCH 01/29] blackfin: Drop CONFIG_SYS_MEMTEST_START/END
Simon Glass
- [U-Boot] [PATCH 02/29] fdt: Allow the device tree to be set up by board init code
Simon Glass
- [U-Boot] [PATCH 03/29] blackfin: Add a few useful linker symbols
Simon Glass
- [U-Boot] [PATCH 04/29] blackfin: Drop the extra blank line in the link script
Simon Glass
- [U-Boot] [PATCH 05/29] blackfin: Use compiler-generated symbols for BSS
Simon Glass
- [U-Boot] [PATCH 06/29] blackfin: Clear the BSS in C code
Simon Glass
- [U-Boot] [PATCH 07/29] blackfin: Add a memory region for pre-relocation data
Simon Glass
- [U-Boot] [PATCH 08/29] blackfin: Use generic board to set the stack address
Simon Glass
- [U-Boot] [PATCH 09/29] blackfin: Avoid using bd_info in print_cpuinfo()
Simon Glass
- [U-Boot] [PATCH 10/29] blackfin: Avoiding using P3 in early init
Simon Glass
- [U-Boot] [PATCH 11/29] blackfin: Allow cpu_init_f() to return
Simon Glass
- [U-Boot] [PATCH 12/29] blackfin: Drop CONFIG_STACKBASE
Simon Glass
- [U-Boot] [PATCH 13/29] tegra: Drop CONFIG_STACKBASE in favour of TEGRA_STACKBASE
Simon Glass
- [U-Boot] [PATCH 14/29] sparc: Drop CONFIG_SYS_MALLOC_BASE
Simon Glass
- [U-Boot] [PATCH 15/29] blackfin: Drop CONFIG_SYS_MALLOC_BASE
Simon Glass
- [U-Boot] [PATCH 16/29] Drop CONFIG_SYS_MALLOC_END
Simon Glass
- [U-Boot] [PATCH 17/29] blackfin: Call C code to relocate
Simon Glass
- [U-Boot] [PATCH 18/29] blackfin: Don't set global_data again
Simon Glass
- [U-Boot] [PATCH 19/29] blackfin: Set the RAM size separately from bd_info
Simon Glass
- [U-Boot] [PATCH 20/29] blackfin: Set up bd_info later
Simon Glass
- [U-Boot] [PATCH 21/29] blackfin: Copy the device tree out of BSS
Simon Glass
- [U-Boot] [PATCH 22/29] blackfin: Allow use of CONFIG_OF_CONTROL
Simon Glass
- [U-Boot] [PATCH 23/29] blackfin: bf537-stamp: Enable CONFIG_OF_CONTROL
Simon Glass
- [U-Boot] [PATCH 24/29] dm: serial: Reset the watchdog when outputting characters
Simon Glass
- [U-Boot] [PATCH 25/29] dm: serial: pxa: Drop pxa from the serial README
Simon Glass
- [U-Boot] [PATCH 26/29] dm: serial: Update the serial README
Simon Glass
- [U-Boot] [PATCH 27/29] dm: blackfin: Add a driver-model serial driver
Simon Glass
- [U-Boot] [PATCH 28/29] blackfin: Set up the debug UART if enabled
Simon Glass
- [U-Boot] [PATCH 29/29] blackfin: Enable driver-model on bf537-stamp
Simon Glass
- [U-Boot] [PATCH v2 03/23] armv8: add lowlevel_init.S
Simon Glass
- [U-Boot] Problem: the build does not recurse into subdirectory
Simon Glass
- [U-Boot] Rockchip RK3288 regulator device table problem
Simon Glass
- [U-Boot] [PATCHv5 01/17] configs: ls1021a: enable DT and DM support
Simon Glass
- [U-Boot] [PATCHv5 09/17] pci: layerscape: move kernel DT fixup to a separate file
Simon Glass
- [U-Boot] [PATCHv5 17/17] kconfig: move FSL_PCIE_COMPAT to platform Kconfig
Simon Glass
- [U-Boot] [PATCH v3] rockchip: rk3288: set isp/vop qos priority level
Simon Glass
- [U-Boot] [RFC PATCH] mmc: mmc-uclass: use the fixed devnum with aliase node
Simon Glass
- [U-Boot] [PATCH v2] miniarm-rk3288: set isp/vop qos priority level
Simon Glass
- [U-Boot] [RFC PATCH 0/3] sunxi: video: Add support for HDMI output on H3
Simon Glass
- [U-Boot] [PATCH v2 1/3] drivers: usb: gadget: ether: do not register usb when DM_USB and DM_ETH defined
Simon Glass
- [U-Boot] [PATCH v2 2/3] drivers: usb: gadget: ether: remove unused variable tmp
Simon Glass
- [U-Boot] [PATCH v2 3/3] drivers: usb: gadget: ether/rndis: convert driver to adopt device driver model
Simon Glass
- [U-Boot] [PATCH 1/3] power: pmic: add the max8998 controller for DM
Simon Glass
- [U-Boot] [PATCH 2/3] arm: dts: s5pc1xx-goni: add the pmic node for using DM
Simon Glass
- [U-Boot] [PATCH 3/3] configs: enable the DM_PMIC and DM_I2C_GPIO for max8998 pmic
Simon Glass
- [U-Boot] [PATCHv2] power: change from meaningless value to error number
Simon Glass
- [U-Boot] [PATCH 2/2] cmd: fdt: Print error message when fdt application fails
Simon Glass
- [U-Boot] [PATCH v2] common: Fix logic in fpga programming
Simon Glass
- [U-Boot] [PATCH 1/2] clk: zynqmp: Add clock driver support for zynqmp
Simon Glass
- [U-Boot] [PATCH 2/7] ARM64: zynqmp: clk: Add the clock for watchdog
Simon Glass
- [U-Boot] [PATCH v2 15/23] sunxi: A64: use H3 DRAM initialization code for A64
Simon Glass
- [U-Boot] [PATCH v2 18/23] sunxi: A64: enable SPL
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] Problem: the build does not recurse into subdirectory
Simon Glass
- [U-Boot] [PATCH] rockchip: Fix veyron-minnie's Kconfig description
Simon Glass
- [U-Boot] [PATCH v6 01/13] binman: Introduce binman, a tool for building binary images
Simon Glass
- [U-Boot] [PATCH v6 02/13] binman: Add basic entry types for U-Boot
Simon Glass
- [U-Boot] [PATCH v6 03/13] binman: Add support for building x86 ROMs
Simon Glass
- [U-Boot] [PATCH v6 04/13] binman: Add support for u-boot.img as an input binary
Simon Glass
- [U-Boot] [PATCH v6 05/13] binman: Add support for building x86 ROMs with SPL
Simon Glass
- [U-Boot] [PATCH v6 06/13] binman: Add support for building x86 images with FSP/CMC
Simon Glass
- [U-Boot] [PATCH v6 07/13] binman: Add a build rule for binman
Simon Glass
- [U-Boot] [PATCH v6 08/13] binman: Allow configuration options to be used in .dts files
Simon Glass
- [U-Boot] [PATCH v6 09/13] binman: Automatically include a U-Boot .dtsi file
Simon Glass
- [U-Boot] [PATCH v6 10/13] tegra: Use a U-Boot-specific .dtsi file
Simon Glass
- [U-Boot] [U-Boot,v6,11/13] sunxi: Use binman for sunxi boards
Simon Glass
- [U-Boot] [PATCH v6 12/13] x86: Use binman all x86 boards
Simon Glass
- [U-Boot] [PATCH v6 13/13] binman: Drop microcode features from ifdtool
Simon Glass
- [U-Boot] [PATCH] MAINTAINERS, git-mailrc: update the Power maintainer
Simon Glass
- [U-Boot] [PATCH v3 0/9] From Simon:
Simon Glass
- [U-Boot] [PATCH v3 03/26] armv8: add lowlevel_init.S
Simon Glass
- [U-Boot] [PATCH v3 05/26] SPL: tiny-printf: ignore "-" modifier
Simon Glass
- [U-Boot] [PATCH v3 21/26] sunxi: A64: enable SPL
Simon Glass
- [U-Boot] [PATCH 1/4] video: tegra: fix spelling in comment
Simon Glass
- [U-Boot] [PATCH 2/4] pci: kconfig: fix spelling in description
Simon Glass
- [U-Boot] [PATCH 3/4] apalis_t30: comment about disabled pcie nodes
Simon Glass
- [U-Boot] [PATCH 4/4] colibri_t20: fix ulpi reset polarity
Simon Glass
- [U-Boot] [PATCH] lib: net_utils: make string_to_ip stricter
Simon Glass
- [U-Boot] [PATCH 2/5] time: move timer APIs to include/time.h
Simon Glass
- [U-Boot] [PATCH 1/5] delay: collect {m, n, u}delay declarations to include/linux/delay.h
Simon Glass
- [U-Boot] [PATCH] tools: mkimage: Call fclose in error path
Simon Glass
- [U-Boot] [PATCH v2 1/2] libfdt: Correct fdt handling of overlays without fixups and base trees without symbols
Simon Glass
- [U-Boot] [PATCH] drivers: usb: Add USB_XHCI_ZYNQMP to Kconfig
Simon Glass
- [U-Boot] [PATCH] usb: storage: Show number of storage devices detected for DM_USB
Simon Glass
- [U-Boot] [PATCH V2 2/3] usb: ehci-mx6: handle vbus-supply
Simon Glass
- [U-Boot] [PATCH V2 1/3] usb: ehci-mx6: implement ofdata_to_platdata
Simon Glass
- [U-Boot] rsa_verify calls fdt_next_node with a node offset from different device tree blob
Simon Glass
- [U-Boot] [PATCH 1/3] x86: quark: Fix build error for quark-based boards
Simon Glass
- [U-Boot] [PATCH 2/3] x86: Add file names from Kconfig in CMC/FSP/VGA nodes in u-boot.dtsi
Simon Glass
- [U-Boot] [PATCH 3/3] binman: Remove hard-coded file name for x86 CMC/FSP/VGA
Simon Glass
- [U-Boot] [PATCH] elf: use program header for loading
Christian Gmeiner
- [U-Boot] [PATCH] elf: use program header for loading
Christian Gmeiner
- [U-Boot] [PATCH] bootm: relocate ramdisk if CONFIG_SYS_BOOT_RAMDISK_HIGH set
Cédric Le Goater
- [U-Boot] [RFC PATCH 0/3] sunxi: video: Add support for HDMI output on H3
Hans de Goede
- [U-Boot] Problems to Allwinner H3's eFUSE/SID
Hans de Goede
- [U-Boot] Problems to Allwinner H3's eFUSE/SID
Hans de Goede
- [U-Boot] Problems to Allwinner H3's eFUSE/SID
Hans de Goede
- [U-Boot] [linux-sunxi] Re: Problems to Allwinner H3's eFUSE/SID
Hans de Goede
- [U-Boot] [PATCH] davinci: omapl138_lcdk: increase PLL0 frequency
Bartosz Golaszewski
- [U-Boot] [linux-sunxi] Re: [RFC PATCH 0/3] sunxi: video: Add support for HDMI output on H3
Alexander Graf
- [U-Boot] [PATCH] relocate-rela: use compiler.h endian macros
Jonathan Gray
- [U-Boot] [PATCH] relocate-rela: use compiler.h endian macros
Jonathan Gray
- [U-Boot] [PATCH 0/3] SPL: move CONFIG_SPL_*_LOAD to Kconfig
Igor Grinberg
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Igor Grinberg
- [U-Boot] [PATCH v4 2/2] splash: add support for loading splash from a FIT image
Igor Grinberg
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Igor Grinberg
- [U-Boot] [PATCH] board: topic: Detect RAM size at boot
Igor Grinberg
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Igor Grinberg
- [U-Boot] [PATCH v4 2/2] splash: add support for loading splash from a FIT image
Igor Grinberg
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Igor Grinberg
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Igor Grinberg
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Igor Grinberg
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Igor Grinberg
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Igor Grinberg
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Igor Grinberg
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Igor Grinberg
- [U-Boot] [PATCH v4 2/2] splash: add support for loading splash from a FIT image
Igor Grinberg
- [U-Boot] [PATCH v4 2/2] splash: add support for loading splash from a FIT image
Igor Grinberg
- [U-Boot] [PATCH v4 2/2] splash: add support for loading splash from a FIT image
Igor Grinberg
- [U-Boot] [PATCH] arm: layerscape: Enable UUID & GPT partition for NXP's ARM SoC
Igor Grinberg
- [U-Boot] [U-boot] [bug report] After update from "2016.01" to "2016.09.01" display is shifted vertically - atmel lcd fb
Robert Grzyb
- [U-Boot] [PATCH 0/1] Adding MSCC PHY-VSC8530-VSC8531-VSC8540-VSC8541
John Haechten
- [U-Boot] [PATCH 1/1] Adding MSCC PHY-VSC8530-VSC8531-VSC8540-VSC8541
John Haechten
- [U-Boot] [PATCH v2] net:phy:MSCC Add Support for VSC8530-VSC8531-VSC8540-VSC8541
John Haechten
- [U-Boot] [PATCH v2] net:phy:MSCC Add Support for VSC8530-VSC8531-VSC8540-VSC8541
John Haechten
- [U-Boot] "Error reading cluster"
Hai, Mr. Dinh Tuan
- [U-Boot] build u-boot
Zuoping Han
- [U-Boot] [RFC PATCH 0/2] ARMv8 Aarch32 support
Ryan Harkin
- [U-Boot] [RFC PATCH 1/2] Add Aarch32 option for ARMv8 CPUs
Ryan Harkin
- [U-Boot] [RFC PATCH 2/2] Add vexpress_aemv8a_aarch32 variant
Ryan Harkin
- [U-Boot] [RFC PATCH 0/2] ARMv8 Aarch32 support
Ryan Harkin
- [U-Boot] [RFC PATCH 0/2] ARMv8 Aarch32 support
Ryan Harkin
- [U-Boot] [RFC PATCH 0/2] ARMv8 Aarch32 support
Ryan Harkin
- [U-Boot] [RFC PACH v2 1/1] Add vexpress_aemv8a_aarch32 variant
Ryan Harkin
- [U-Boot] [RFC PACH v2 1/1] Add vexpress_aemv8a_aarch32 variant
Ryan Harkin
- [U-Boot] [PATCH v2 3/4] mmc: zynq: Determine base clock frequency via clock framework
Stefan Herbrechtsmeier
- [U-Boot] [RESEND PATCH v3 1/2] mmc: rockchip_sdhci: add clock init for mmc
Stefan Herbrechtsmeier
- [U-Boot] [RESEND PATCH v3 1/2] mmc: rockchip_sdhci: add clock init for mmc
Stefan Herbrechtsmeier
- [U-Boot] [RESEND PATCH v3 1/2] mmc: rockchip_sdhci: add clock init for mmc
Stefan Herbrechtsmeier
- [U-Boot] [PATCH] net: zynq_gem: Return 0 on success, not -ENOSYS
Joe Hershberger
- [U-Boot] net: phy: micrel: Fix error handling
Joe Hershberger
- [U-Boot] [PATCH] net: phy: Improve the Marvell 151x constants
Joe Hershberger
- [U-Boot] [PATCH v3 3/9] ARM: stm32: cleanup stm32f7 files
Joe Hershberger
- [U-Boot] [PATCH v3 3/9] ARM: stm32: cleanup stm32f7 files
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] [PATCH 1/1] Adding MSCC PHY-VSC8530-VSC8531-VSC8540-VSC8541
Joe Hershberger
- [U-Boot] net: phy: realtek: Use the BIT() macro
Joe Hershberger
- [U-Boot] net: phy: realtek: make define more consistent
Joe Hershberger
- [U-Boot] net: phy: realtek: Only force master mode on rtl8211b/c
Joe Hershberger
- [U-Boot] net: fman: fix 2.5G SGMII settings
Joe Hershberger
- [U-Boot] net: usb: r8152: Use ALLOC_CACHE_ALIGN_BUFFER() to allocate the buffers
Joe Hershberger
- [U-Boot] net/phy/vitesse: Rework RGMII skew configuration for VSC8601
Joe Hershberger
- [U-Boot] [PATCH 1/1] Adding MSCC PHY-VSC8530-VSC8531-VSC8540-VSC8541
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] [PATCH 1/1] Adding MSCC PHY-VSC8530-VSC8531-VSC8540-VSC8541
Joe Hershberger
- [U-Boot] [PATCH v2] net: phy: Improve the Marvell 151x constants
Joe Hershberger
- [U-Boot] [PATCH 09/14] net: Add ability to set MAC address via EEPROM
Joe Hershberger
- [U-Boot] [PATCH v3 02/13] net: fec_mxc: Convert into driver model
Joe Hershberger
- [U-Boot] [PATCH] net: phy: ti: Fix dp83867 RGMII_TXID interface path
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] [PATCH 1/2] common: miiphyutil: Add helper function for mdio bus name
Joe Hershberger
- [U-Boot] [PATCH 2/2] net: xilinx: Use mdio_register_seq() to support multiple instances
Joe Hershberger
- [U-Boot] [PATCH 1/5] net: phy: Fix mask so that we can identify Marvell 88E1518
Joe Hershberger
- [U-Boot] [PATCH 2/5] net: phy: Add support for Marvell M88E1512
Joe Hershberger
- [U-Boot] [PATCH v2 3/5] net: phy: Marvell 88E151x: Add support for RGMII
Joe Hershberger
- [U-Boot] [PATCH 4/5] net: phy: Marvell 88E151x: Increase delay after init
Joe Hershberger
- [U-Boot] [PATCH 5/5] net: phy: Marvell: Use phy_interface_is_rgmii helper function
Joe Hershberger
- [U-Boot] [PATCH v2 4/5] net: phy: Marvell 88E151x: Increase delay after init
Joe Hershberger
- [U-Boot] [PATCH v2 5/5] net: phy: Marvell: Use phy_interface_is_rgmii helper function
Joe Hershberger
- [U-Boot] [PATCH 2/5] net: phy: Add support for Marvell M88E1512
Joe Hershberger
- [U-Boot] [PATCH v2 1/5] net: phy: Fix mask so that we can identify Marvell 88E1518
Joe Hershberger
- [U-Boot] [PATCH v2 2/5] net: phy: Add support for Marvell M88E1512
Joe Hershberger
- [U-Boot] [PATCH] ARM: DRA7: AMxx: Make sure that the SPL always reads the configuration EEPROM
Jean-Jacques Hiblot
- [U-Boot] [PATCH] disk: Fixed capacity message
Jean-Jacques Hiblot
- [U-Boot] [PATCH] ARM: imx7s-warp: enable USB gadget ethernet
Kevin Hilman
- [U-Boot] [PATCH 4/4] ARM: dts: zynq: replace gpio-key, wakeup with wakeup-source property
Sudeep Holla
- [U-Boot] [PATCH 4/4] ARM: dts: zynq: replace gpio-key, wakeup with wakeup-source property
Sudeep Holla
- [U-Boot] [PATCHv3 09/15] pci: layerscape: add pci driver based on DM
Z.Q. Hou
- [U-Boot] [PATCHv4 02/16] dm: pci: return the real controller in pci_bus_to_hose()
Z.Q. Hou
- [U-Boot] [PATCHv4 09/16] pci: layerscape: add pci driver based on DM
Z.Q. Hou
- [U-Boot] [PATCHv4 15/16] pci: layerscape: remove unnecessary legacy code
Z.Q. Hou
- [U-Boot] [PATCH 1/5] pmic: pmic_mc34vr500: Add a driver for the mc34vr500 pmic
Z.Q. Hou
- [U-Boot] [PATCH] armv8/fsl_lsch2: Add the OCRAM initialization
Z.Q. Hou
- [U-Boot] [PATCHv5 02/17] dm: pci: return the real controller in pci_bus_to_hose()
Z.Q. Hou
- [U-Boot] [PATCHv5 03/17] dm: pci: remove pci_bus_to_hose(0) calling
Z.Q. Hou
- [U-Boot] [PATCHv2 1/2] ARMv8/fsl-layerscape: Correct the OCRAM size
Z.Q. Hou
- [U-Boot] [PATCHv5 01/17] configs: ls1021a: enable DT and DM support
Z.Q. Hou
- [U-Boot] [PATCHv5 09/17] pci: layerscape: move kernel DT fixup to a separate file
Z.Q. Hou
- [U-Boot] [PATCHv5 17/17] kconfig: move FSL_PCIE_COMPAT to platform Kconfig
Z.Q. Hou
- [U-Boot] [PATCH 1/2] armv8: Enable CPUECTLR.SMPEN for coherency
Z.Q. Hou
- [U-Boot] [PATCHv3 1/2] armv8/fsl-lsch2: refactor the clock system initialization
Z.Q. Hou
- [U-Boot] [PATCHv3 1/2] armv8/fsl-lsch2: refactor the clock system initialization
Z.Q. Hou
- [U-Boot] [PATCHv3 1/2] armv8/fsl-lsch2: refactor the clock system initialization
Z.Q. Hou
- [U-Boot] [PATCHv4 1/2] armv8/fsl-lsch2: refactor the clock system initialization
Z.Q. Hou
- [U-Boot] [PATCHv3 2/2] armv8/fsl-lsch3: consolidate the clock system initialization
Z.Q. Hou
- [U-Boot] [PATCHv3 1/2] armv8/fsl-lsch2: refactor the clock system initialization
Z.Q. Hou
- [U-Boot] [PATCHv4 01/16] configs: ls1021a: enable DT and DM support
Zhiqiang Hou
- [U-Boot] [PATCHv4 02/16] dm: pci: return the real controller in pci_bus_to_hose()
Zhiqiang Hou
- [U-Boot] [PATCHv4 03/16] dm: pci: remove pci_bus_to_hose(0) calling
Zhiqiang Hou
- [U-Boot] [PATCHv4 04/16] arm: ls1021a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv4 05/16] arm: ls1012a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv4 06/16] armv8: ls1043a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv4 07/16] armv8: ls1046a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv4 08/16] armv8: ls2080a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv4 09/16] pci: layerscape: add pci driver based on DM
Zhiqiang Hou
- [U-Boot] [PATCHv4 10/16] arm: ls1021a: Enable PCIe in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv4 11/16] arm: ls1012a: Enable PCIe and E1000 in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv4 12/16] armv8: ls1043a: Enable PCIe and E1000 in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv4 13/16] armv8: ls1046a: Enable PCIe and E1000 in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv4 14/16] armv8: ls2080a: Enable PCIe in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv4 15/16] pci: layerscape: remove unnecessary legacy code
Zhiqiang Hou
- [U-Boot] [PATCHv4 16/16] kconfig: move FSL_PCIE_COMPAT to platform Kconfig
Zhiqiang Hou
- [U-Boot] [PATCH 1/2] armv8: ls1043ardb: dts: Fix the unit-address of some I2C device nodes
Zhiqiang Hou
- [U-Boot] [PATCH 2/2] armv8: ls1043a: dts: Fix the ranges table of IFC node
Zhiqiang Hou
- [U-Boot] [PATCH 1/5] pmic: pmic_mc34vr500: Add a driver for the mc34vr500 pmic
Zhiqiang Hou
- [U-Boot] [PATCH 2/5] pmic: pmic_mc34vr500: Add APIs to set/get SWx volt
Zhiqiang Hou
- [U-Boot] [PATCH 3/5] ls1046ardb: cpld: add API for selecting core volt
Zhiqiang Hou
- [U-Boot] [PATCH 4/5] armv8/fsl_lsch2: Add chip power supply voltage setup
Zhiqiang Hou
- [U-Boot] [PATCH 5/5] ls1046ardb: Add support power initialization
Zhiqiang Hou
- [U-Boot] [PATCHv5 01/17] configs: ls1021a: enable DT and DM support
Zhiqiang Hou
- [U-Boot] [PATCHv5 02/17] dm: pci: return the real controller in pci_bus_to_hose()
Zhiqiang Hou
- [U-Boot] [PATCHv5 03/17] dm: pci: remove pci_bus_to_hose(0) calling
Zhiqiang Hou
- [U-Boot] [PATCHv5 04/17] arm: ls1021a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv5 05/17] arm: ls1012a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv5 06/17] armv8: ls1043a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv5 07/17] armv8: ls1046a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv5 08/17] armv8: ls2080a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv5 09/17] pci: layerscape: move kernel DT fixup to a separate file
Zhiqiang Hou
- [U-Boot] [PATCHv5 10/17] pci: layerscape: add pci driver based on DM
Zhiqiang Hou
- [U-Boot] [PATCHv5 11/17] arm: ls1021a: Enable PCIe in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv5 12/17] arm: ls1012a: Enable PCIe and E1000 in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv5 13/17] armv8: ls1043a: Enable PCIe and E1000 in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv5 14/17] armv8: ls1046a: Enable PCIe and E1000 in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv5 15/17] armv8: ls2080a: Enable PCIe in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv5 16/17] pci: layerscape: remove unnecessary legacy code
Zhiqiang Hou
- [U-Boot] [PATCHv5 17/17] kconfig: move FSL_PCIE_COMPAT to platform Kconfig
Zhiqiang Hou
- [U-Boot] [PATCH] armv8/fsl_lsch2: Add the OCRAM initialization
Zhiqiang Hou
- [U-Boot] [PATCH 1/2] armv8: Enable CPUECTLR.SMPEN for coherency
Zhiqiang Hou
- [U-Boot] [PATCH 2/2] ARMv8/fsl-layerscape: Enable data coherency between cores in cluster
Zhiqiang Hou
- [U-Boot] [PATCHv2 1/2] ARMv8/fsl-layerscape: Correct the OCRAM size
Zhiqiang Hou
- [U-Boot] [PATCHv2 2/2] armv8/fsl_lsch2: Add the OCRAM initialization
Zhiqiang Hou
- [U-Boot] [PATCHv3 1/2] armv8/fsl-lsch2: refactor the clock system initialization
Zhiqiang Hou
- [U-Boot] [PATCHv3 2/2] armv8/fsl-lsch3: consolidate the clock system initialization
Zhiqiang Hou
- [U-Boot] [PATCHv4 1/2] armv8/fsl-lsch2: refactor the clock system initialization
Zhiqiang Hou
- [U-Boot] [PATCHv4 2/2] armv8/fsl-lsch3: consolidate the clock system initialization
Zhiqiang Hou
- [U-Boot] [PATCHv4 1/2] armv8/fsl-lsch2: refactor the clock system initialization
Zhiqiang Hou
- [U-Boot] [PATCHv3 2/2] armv8/fsl-lsch3: consolidate the clock system initialization
Zhiqiang Hou
- [U-Boot] [PATCH] mpc85xx: pci: Implement workaround for Erratum A007815
Mingkai Hu
- [U-Boot] [PATCH v2] fsl/usb: enable the errata-a005697 for ls1012a
Changming Huang
- [U-Boot] [PATCH] armv8: fsl-lsch2: enable snoopable usb read and write
Changming Huang
- [U-Boot] [PATCH v2] armv8: fsl-lsch2: enable snoopable usb read and write
Changming Huang
- [U-Boot] [PATCH] fsl/usb: enable the errata-a005697 for ls1012a
Jerry Huang
- [U-Boot] [PATCH v2] armv8: fsl-lsch2: enable snoopable usb read and write
Jerry Huang
- [U-Boot] [PATCH] driver: fsl-mc: qbman: Add QBMAN 4.1 support
Priyanka Jain
- [U-Boot] [PATCH] driver: net: fsl-mc: Update MC memory allocation code
Priyanka Jain
- [U-Boot] [PATCH] driver: net: fsl-mc: Update MC memory allocation code
Priyanka Jain
- [U-Boot] [PATCH 0/6] dm: i2c: Set a timeline for conversion of i2c drivers
Minkyu Kang
- [U-Boot] [PATCH 1/3] power: pmic: add the max8998 controller for DM
Minkyu Kang
- [U-Boot] [PATCH 2/3] arm: dts: s5pc1xx-goni: add the pmic node for using DM
Minkyu Kang
- [U-Boot] [PATCH 3/3] configs: enable the DM_PMIC and DM_I2C_GPIO for max8998 pmic
Minkyu Kang
- [U-Boot] [PATCH 0/3] dm: goni: support the DM PMIC
Minkyu Kang
- [U-Boot] [PATCH 0/3] dm: goni: support the DM PMIC
Minkyu Kang
- [U-Boot] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] [PATCH] arm: samsung: goni: use the driver model for max8998
Minkyu Kang
- [U-Boot] FIT Image Crashing
Kipper, Matthew
- [U-Boot] [PATCH] ARM: dts: tegra: Sync paz00 with Linux 4.8
Misha Komarovskiy
- [U-Boot] [PATCH 1/1] rpi: set serial port clock to 48 MHz
Mirza Krak
- [U-Boot] check_config.sh produces false positive error?
Mirza Krak
- [U-Boot] [PATCH 1/1] rpi: set serial port clock to 48 MHz
Mirza Krak
- [U-Boot] check_config.sh produces false positive error?
Mirza Krak
- [U-Boot] [PATCH v3 1/9] ARM: DTS: stm32: add stm32f746 device tree pin control files
Michael Kurz
- [U-Boot] [PATCH v3 2/9] ARM: DTS: stm32: add stm32f746-disco device tree files
Michael Kurz
- [U-Boot] [PATCH v3 3/9] ARM: stm32: cleanup stm32f7 files
Michael Kurz
- [U-Boot] [PATCH v3 6/9] net: stm32: add designware mac glue code for stm32
Michael Kurz
- [U-Boot] [PATCH][v2] armv8: fsl-layerscape: Add support of GPIO structure
Prabhakar Kushwaha
- [U-Boot] [PATCH][v3] armv8: fsl-layerscape: Add support of GPIO structure
Prabhakar Kushwaha
- [U-Boot] [PATCH 1/2] board: freescale: ls1012a: Enable secure DDR on LS1012A platforms
Prabhakar Kushwaha
- [U-Boot] [PATCH 2/2] armv8: ls1012a: Add support of PPA
Prabhakar Kushwaha
- [U-Boot] [PATCH] arm: layerscape: Enable UUID & GPT partition for NXP's ARM SoC
Prabhakar Kushwaha
- [U-Boot] [PATCHv3 1/2] armv8/fsl-lsch2: refactor the clock system initialization
Prabhakar Kushwaha
- [U-Boot] [PATCHv3 1/2] armv8/fsl-lsch2: refactor the clock system initialization
Prabhakar Kushwaha
- [U-Boot] [PATCHv3 1/2] armv8/fsl-lsch2: refactor the clock system initialization
Prabhakar Kushwaha
- [U-Boot] [PATCH] board: freescale: ls2080a: Intergrate and enable PPA on LS2080A
Prabhakar Kushwaha
- [U-Boot] [PATCH 1/2][v2] board: freescale: ls1012a: Enable secure DDR on LS1012A platforms
Prabhakar Kushwaha
- [U-Boot] [PATCH 2/2][v2] armv8: ls1012a: Add support of PPA
Prabhakar Kushwaha
- [U-Boot] [PATCH v3 19/26] sunxi: H3/A64: fix non-ODT setting
Jens Kuske
- [U-Boot] [PATCH 1/6] udoo_neo: Remove USDHC3 support
Breno Lima
- [U-Boot] [PATCH 2/6] udoo_neo: Move MX6SX configuration to Kconfig
Breno Lima
- [U-Boot] [PATCH 3/6] udoo_neo: Staticize board_string()
Breno Lima
- [U-Boot] [PATCH 4/6] udoo_neo: Remove mmcautodetect option
Breno Lima
- [U-Boot] [PATCH 5/6] udoo_neo: Remove console option
Breno Lima
- [U-Boot] [PATCH 6/6] udoo_neo: Add thermal support
Breno Lima
- [U-Boot] [PATCH 1/3] power: pmic: Add Voltage configuration macro
Breno Lima
- [U-Boot] [PATCH 2/3] udoo_neo: Add PFUZE300 PMIC support
Breno Lima
- [U-Boot] [PATCH 3/3] udoo_neo: Add Ethernet support
Breno Lima
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Mike Looijmans
- [U-Boot] [PATCH] board: topic: Detect RAM size at boot
Mike Looijmans
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Mike Looijmans
- [U-Boot] [PATCH] common: Fix logic in fpga programming
Mike Looijmans
- [U-Boot] Hoping to dual-boot an M8S Pro / Amlogic S812 machine
Alexandru Lovin
- [U-Boot] [PATCH 2/2] armv8: ls1012a: define esdhc_status_fixup for QDS board
Y.B. Lu
- [U-Boot] [PATCH 1/4] mmc: fsl_esdhc: make GPIO support optional
Yangbo Lu
- [U-Boot] [PATCH 2/4] mmc: fsl_esdhc: add 'fsl, esdhc' into of_match table
Yangbo Lu
- [U-Boot] [PATCH 3/4] armv8: ls1012a: add eSDHC nodes
Yangbo Lu
- [U-Boot] [PATCH 4/4] configs: ls1012a: enable driver model for eSDHC
Yangbo Lu
- [U-Boot] [PATCH 1/2] mmc: fsl_esdhc: move 'status' property fixup into a weak function
Yangbo Lu
- [U-Boot] [PATCH 2/2] armv8: ls1012a: define esdhc_status_fixup for QDS board
Yangbo Lu
- [U-Boot] [v2, 1/3] mmc: fsl_esdhc: move 'status' property fixup into a weak function
Yangbo Lu
- [U-Boot] [v2, 2/3] armv8: ls1012a: define esdhc_status_fixup for QDS board
Yangbo Lu
- [U-Boot] [v2, 3/3] armv8: ls1012a: define esdhc_status_fixup for RDB board
Yangbo Lu
- [U-Boot] [v3, 1/3] mmc: fsl_esdhc: move 'status' property fixup into a weak function
Yangbo Lu
- [U-Boot] [v3, 2/3] armv8: ls1012a: define esdhc_status_fixup for QDS board
Yangbo Lu
- [U-Boot] [v3, 3/3] armv8: ls1012a: define esdhc_status_fixup for RDB board
Yangbo Lu
- [U-Boot] [PATCH v3 3/9] ARM: stm32: cleanup stm32f7 files
Vikas MANOCHA
- [U-Boot] [PATCH v3 3/9] ARM: stm32: cleanup stm32f7 files
Vikas MANOCHA
- [U-Boot] [PATCH v3 2/9] ARM: DTS: stm32: add stm32f746-disco device tree files
Vikas MANOCHA
- [U-Boot] [PATCH v3 6/9] net: stm32: add designware mac glue code for stm32
Vikas MANOCHA
- [U-Boot] [PATCH v3 3/9] ARM: stm32: cleanup stm32f7 files
Vikas MANOCHA
- [U-Boot] qemu-x86 issues
Pavel Machek
- [U-Boot] [PATCH] configs: colibri_vf: Add fdt_fixup environment variable
Sanchayan Maity
- [U-Boot] Please assign custodian for: u-boot-pmic / maintainers for: Samsung boards
Lukasz Majewski
- [U-Boot] [PATCH] MAINTAINERS: ONENAND: MTD: Mark Samsung's OneNAND as orphaned
Lukasz Majewski
- [U-Boot] [PATCH] MAINTAINERS: DFU: Change e-mail address for DFU maintainer
Lukasz Majewski
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Lukasz Majewski
- [U-Boot] [PATCH] BOARD: MCCMON6: Provide support for iMX6q based mccmon6 board
Lukasz Majewski
- [U-Boot] [PATCH v2] BOARD: MCCMON6: Provide support for iMX6q based mccmon6 board
Lukasz Majewski
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Lukasz Majewski
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Lukasz Majewski
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Lukasz Majewski
- [U-Boot] [PATCH 0/5] cl-som-am57x: initial support
Uri Mashiach
- [U-Boot] [PATCH 1/5] arm: am57xx: cl-som-am57x: add initial board support
Uri Mashiach
- [U-Boot] [PATCH 2/5] arm: am57xx: cl-som-am57x: add MMC as a boot devices for spl
Uri Mashiach
- [U-Boot] [PATCH 3/5] arm: am57xx: cl-som-am57x: fetch board rev from EEPROM
Uri Mashiach
- [U-Boot] [PATCH 4/5] arm: am57xx: cl-som-am57x: add ETH support
Uri Mashiach
- [U-Boot] [PATCH 5/5] arm: am57xx: cl-som-am57x: update default env
Uri Mashiach
- [U-Boot] [PATCH 1/5] arm: am57xx: cl-som-am57x: add initial board support
Uri Mashiach
- [U-Boot] [PATCH v2 0/4] cl-som-am57x: initial support
Uri Mashiach
- [U-Boot] [PATCH v2 1/4] arm: am57xx: cl-som-am57x: add initial board support
Uri Mashiach
- [U-Boot] [PATCH v2 2/4] arm: am57xx: cl-som-am57x: fetch board rev from EEPROM
Uri Mashiach
- [U-Boot] [PATCH v2 3/4] arm: am57xx: cl-som-am57x: add ETH support
Uri Mashiach
- [U-Boot] [PATCH v2 4/4] arm: am57xx: cl-som-am57x: update default env
Uri Mashiach
- [U-Boot] [PATCH v2 1/4] arm: am57xx: cl-som-am57x: add initial board support
Uri Mashiach
- [U-Boot] [PATCH v3 0/4] cl-som-am57x: initial support
Uri Mashiach
- [U-Boot] [PATCH v3 1/4] arm: am57xx: cl-som-am57x: add initial board support
Uri Mashiach
- [U-Boot] [PATCH v3 2/4] arm: am57xx: cl-som-am57x: fetch board rev from EEPROM
Uri Mashiach
- [U-Boot] [PATCH v3 3/4] arm: am57xx: cl-som-am57x: add ETH support
Uri Mashiach
- [U-Boot] [PATCH v3 4/4] arm: am57xx: cl-som-am57x: update default env
Uri Mashiach
- [U-Boot] [PATCH v4 0/4] cl-som-am57x: initial support
Uri Mashiach
- [U-Boot] [PATCH v4 1/4] arm: am57xx: cl-som-am57x: add initial board support
Uri Mashiach
- [U-Boot] [PATCH v4 2/4] arm: am57xx: cl-som-am57x: fetch board rev from EEPROM
Uri Mashiach
- [U-Boot] [PATCH v4 3/4] arm: am57xx: cl-som-am57x: add ETH support
Uri Mashiach
- [U-Boot] [PATCH v4 4/4] arm: am57xx: cl-som-am57x: update default env
Uri Mashiach
- [U-Boot] [PATCH v2 1/2] splash: add support for loading splash from a FIT image
Tomas Melin
- [U-Boot] [PATCH v3 1/2] splash: sort include files
Tomas Melin
- [U-Boot] [PATCH v3 2/2] splash: add support for loading splash from a FIT image
Tomas Melin
- [U-Boot] [PATCH v4 1/2] splash: sort include files
Tomas Melin
- [U-Boot] [PATCH v4 2/2] splash: add support for loading splash from a FIT image
Tomas Melin
- [U-Boot] [PATCH v4 2/2] splash: add support for loading splash from a FIT image
Tomas Melin
- [U-Boot] [PATCH v4 2/2] splash: add support for loading splash from a FIT image
Tomas Melin
- [U-Boot] post_codes in u-boot?
Bin Meng
- [U-Boot] [PATCHv5 02/17] dm: pci: return the real controller in pci_bus_to_hose()
Bin Meng
- [U-Boot] [PATCHv5 03/17] dm: pci: remove pci_bus_to_hose(0) calling
Bin Meng
- [U-Boot] [PATCH v6 01/13] binman: Introduce binman, a tool for building binary images
Bin Meng
- [U-Boot] [PATCH v6 02/13] binman: Add basic entry types for U-Boot
Bin Meng
- [U-Boot] [PATCH v6 03/13] binman: Add support for building x86 ROMs
Bin Meng
- [U-Boot] [PATCH v6 04/13] binman: Add support for u-boot.img as an input binary
Bin Meng
- [U-Boot] [PATCH v6 05/13] binman: Add support for building x86 ROMs with SPL
Bin Meng
- [U-Boot] [PATCH v6 06/13] binman: Add support for building x86 images with FSP/CMC
Bin Meng
- [U-Boot] [PATCH v6 07/13] binman: Add a build rule for binman
Bin Meng
- [U-Boot] [PATCH v6 08/13] binman: Allow configuration options to be used in .dts files
Bin Meng
- [U-Boot] [PATCH v6 09/13] binman: Automatically include a U-Boot .dtsi file
Bin Meng
- [U-Boot] [PATCH v6 12/13] x86: Use binman all x86 boards
Bin Meng
- [U-Boot] [PATCH v6 13/13] binman: Drop microcode features from ifdtool
Bin Meng
- [U-Boot] [PATCH v2 01/63] console: Don't enable CONFIG-CONSOLE_MUX, etc. in SPL
Bin Meng
- [U-Boot] [PATCH v2 02/63] spl: spi: Add a debug message if loading fails
Bin Meng
- [U-Boot] [PATCH v2 03/63] spl: Makefile: Define SPL_ earlier
Bin Meng
- [U-Boot] [PATCH v2 04/63] spl: Allow CPU drivers to be used in SPL
Bin Meng
- [U-Boot] [PATCH v2 05/63] spl: Allow PCI drivers to be used in SPL
Bin Meng
- [U-Boot] [PATCH v2 06/63] spl: Allow RTC drivers to be used in SPL
Bin Meng
- [U-Boot] [PATCH v2 07/63] spl: Allow timer drivers to be used in SPL
Bin Meng
- [U-Boot] [PATCH v2 08/63] spl: Allow PCH drivers to be used in SPL
Bin Meng
- [U-Boot] [PATCH v2 09/63] spl: Don't create a BSS padding when it is separate
Bin Meng
- [U-Boot] [PATCH v2 11/63] WIP: x86: Update mpspec to build on 64-bit machines
Bin Meng
- [U-Boot] [PATCH v2 12/63] x86: Add basic support for U-Boot as a 64-bit EFI application
Bin Meng
- [U-Boot] [PATCH v2 14/63] x86: ivybridge: Add more debugging for failures
Bin Meng
- [U-Boot] [PATCH v2 15/63] x86: ivybridge: Fix types for 64-bit compilation
Bin Meng
- [U-Boot] [PATCH v2 10/63] x86: Use unsigned long for address in table generation
Bin Meng
- [U-Boot] [PATCH v2 16/63] x86: dts: Mark serial as needed before relocation
Bin Meng
- [U-Boot] [PATCH v2 17/63] x86: fsp: Fix cast for 64-bit compilation
Bin Meng
- [U-Boot] [PATCH v2 19/63] x86: Add Kconfig options to build 64-bit U-Boot
Bin Meng
- [U-Boot] [PATCH v2 20/63] x86: Kconfig: Add location options for 16/32-bit init
Bin Meng
- [U-Boot] [PATCH v2 21/63] x86: Use X86_16BIT_INIT instead of X86_RESET_VECTOR
Bin Meng
- [U-Boot] [PATCH v2 22/63] x86: Use X86_32BIT_INIT instead of X86_RESET_VECTOR
Bin Meng
- [U-Boot] [PATCH v2 23/63] x86: ivybridge: Allow 32-bit init to move to SPL
Bin Meng
- [U-Boot] [PATCH 1/3] x86: quark: Fix build error for quark-based boards
Bin Meng
- [U-Boot] [PATCH 2/3] x86: Add file names from Kconfig in CMC/FSP/VGA nodes in u-boot.dtsi
Bin Meng
- [U-Boot] [PATCH 3/3] binman: Remove hard-coded file name for x86 CMC/FSP/VGA
Bin Meng
- [U-Boot] [PATCH 1/3] x86: quark: Fix build error for quark-based boards
Bin Meng
- [U-Boot] [PATCH 2/3] x86: Add file names from Kconfig in CMC/FSP/VGA nodes in u-boot.dtsi
Bin Meng
- [U-Boot] [PATCH 3/3] binman: Remove hard-coded file name for x86 CMC/FSP/VGA
Bin Meng
- [U-Boot] Please pull u-boot-x86
Bin Meng
- [U-Boot] [PATCH v2 24/63] x86: Add 64-bit start-up code
Bin Meng
- [U-Boot] [PATCH v2 25/63] x86: board_f: Update init sequence for 64-bit startup
Bin Meng
- [U-Boot] [PATCH v2 26/63] x86: board_r: Set the global data pointer after relocation
Bin Meng
- [U-Boot] [PATCH v2 27/63] x86: Do relocation before clearing BSS
Bin Meng
- [U-Boot] [PATCH v2 28/63] x86: Refactor relocation to prepare for 64-bit
Bin Meng
- [U-Boot] [PATCH] tools: mkimage: Call fclose in error path
Ladislav Michl
- [U-Boot] [PATCH] rockchip: Fix veyron-minnie's Kconfig description
Martin Michlmayr
- [U-Boot] [PATCH] Makefile: Fix linking with modern binutils
Alan Modra
- [U-Boot] Cubieboard2 uboot 2016.09.01 not supporting booting from sata
Robert Moskowitz
- [U-Boot] Cubieboard2 uboot 2016.09.01 not supporting booting from sata
Robert Moskowitz
- [U-Boot] Cubieboard2 uboot 2016.09.01 not supporting booting from sata
Robert Moskowitz
- [U-Boot] Cubieboard2 uboot 2016.09.01 not supporting booting from sata
Robert Moskowitz
- [U-Boot] Fixed - Re: Cubieboard2 uboot 2016.09.01 not supporting booting from sata
Robert Moskowitz
- [U-Boot] [PATCH v2 0/3] DM conversion of usb ether gadget
Mugunthan V N
- [U-Boot] [PATCH v2 1/3] drivers: usb: gadget: ether: do not register usb when DM_USB and DM_ETH defined
Mugunthan V N
- [U-Boot] [PATCH v2 2/3] drivers: usb: gadget: ether: remove unused variable tmp
Mugunthan V N
- [U-Boot] [PATCH v2 3/3] drivers: usb: gadget: ether/rndis: convert driver to adopt device driver model
Mugunthan V N
- [U-Boot] [PATCH 07/10] arm: socfpga: arria10: Added miscellaneous drivers for Arria10
Dinh Nguyen
- [U-Boot] [PATCH 07/10] arm: socfpga: arria10: Added miscellaneous drivers for Arria10
Dinh Nguyen
- [U-Boot] [RFC v2 0/3] Add PL330 DMA support on SoCFPGA
Dinh Nguyen
- [U-Boot] [RFC v2 1/3] drivers: dma: Add the ARM PL330 DMA driver
Dinh Nguyen
- [U-Boot] [RFC v2 2/3] arm: socfpga: scrub the SDRAM to properly enable ECC support
Dinh Nguyen
- [U-Boot] [RFC v2 3/3] arm: socfpga: Add reset manager defines for reset status
Dinh Nguyen
- [U-Boot] [PATCH 10/10] arm: socfpga: arria10: Added Arria10 critical HW initialization to spl
Dinh Nguyen
- [U-Boot] [PATCH 10/10] arm: socfpga: arria10: Added Arria10 critical HW initialization to spl
Dinh Nguyen
- [U-Boot] [PATCH v2 29/30] arm: socfpga: arria10: Added Arria10 critical HW initialization to spl
Dinh Nguyen
- [U-Boot] [PATCH v2] miniarm-rk3288: set isp/vop qos priority level
Nickey.Yang
- [U-Boot] [PATCH] imx_common: spl: Fix SPL boot from SD card
Marcin Niestroj
- [U-Boot] [PATCH] imx_common: spl: Fix SPL boot from SD card
Marcin Niestroj
- [U-Boot] [PATCH v2 0/2] ARM: imx6ul: Support liteSOM and liteBoard
Marcin Niestroj
- [U-Boot] [PATCH v2 1/2] ARM: imx6ul: Add support for liteSOM
Marcin Niestroj
- [U-Boot] [PATCH v2 2/2] board/liteboard: Add support for liteBoard
Marcin Niestroj
- [U-Boot] [PATCH 0/2] ARM: imx6ul: Support liteSOM and liteBoard
Marcin Niestroj
- [U-Boot] [linux-sunxi] Problems to Allwinner H3's eFUSE/SID
Bernhard Nortmann
- [U-Boot] [linux-sunxi] Problems to Allwinner H3's eFUSE/SID
Bernhard Nortmann
- [U-Boot] post_codes in u-boot?
Haleigh Novak
- [U-Boot] [RFC PATCH] pcf2127: add watchdog support
Sean Nyekjaer
- [U-Boot] [PATCH] mpc85xx: pci: Implement workaround for Erratum A007815
Tony O'Brien
- [U-Boot] [PATCH v2] mpc85xx: pci: Implement workaround for Erratum A007815
Tony O'Brien
- [U-Boot] Warm reset problems in U-Boot
Oehen, Marcel
- [U-Boot] [PATCH] powerpc: Retain compatible property for L2 cache
Chris Packham
- [U-Boot] [PATCH] mpc85xx: pci: Implement workaround for Erratum A007815
Chris Packham
- [U-Boot] [PATCH] powerpc: Retain compatible property for L2 cache
Chris Packham
- [U-Boot] [PATCH v2] powerpc: Retain compatible property for L2 cache
Chris Packham
- [U-Boot] [RESEND PATCH v2] powerpc: Retain compatible property for L2 cache
Chris Packham
- [U-Boot] [PATCH] lib: net_utils: make string_to_ip stricter
Chris Packham
- [U-Boot] [RESEND PATCH v2] powerpc: Retain compatible property for L2 cache
Chris Packham
- [U-Boot] [PATCH] lib: net_utils: make string_to_ip stricter
Chris Packham
- [U-Boot] Query on qspi driver
Siva Durga Prasad Paladugu
- [U-Boot] How to change partition sizes in Uboot
Haris Papadopoulos
- [U-Boot] How to take value of an environmental variable of uboot in linux
Haris Papadopoulos
- [U-Boot] Learn size of file in ram from bootloader
Haris Papadopoulos
- [U-Boot] [PATCH] mtd: spi: don't return -1 when scan succeed
Fabien Parent
- [U-Boot] [PATCH] davinci: omapl138_lcdk: boot from zImage
Fabien Parent
- [U-Boot] [PATCH 0/2] davinci: omapl138_lcdk: fix unreliable NAND accesses
Fabien Parent
- [U-Boot] [PATCH 1/2] davinci: omapl138_lcdk: increase u-boot load size
Fabien Parent
- [U-Boot] [PATCH 2/2] davinci: omapl138_lcdk: fix bad NAND ECC config
Fabien Parent
- [U-Boot] [PATCH 0/3] SPL: move CONFIG_SPL_*_LOAD to Kconfig
Fabien Parent
- [U-Boot] [PATCH 1/3] davinci: spl: use correct macro to select boot device
Fabien Parent
- [U-Boot] [PATCH 2/3] SPL: create Kconfig options for CONFIG_SPL_*_LOAD
Fabien Parent
- [U-Boot] [PATCH 3/3] davinci: omapl138_lcdk: use new CONFIG_SPL_*_LOAD Kconfig options
Fabien Parent
- [U-Boot] [PATCH v2] davinci: omapl138_lcdk: boot from zImage
Fabien Parent
- [U-Boot] [PATCH v2 2/6] arm64: mvebu: Add bubt command for flash image burn
Kostya Porotchkin
- [U-Boot] [PATCH v2 1/6] arm64: mvebu: Modify the A8K SPI and I2C config in DTS
Kostya Porotchkin
- [U-Boot] [PATCH v2 2/6] arm64: mvebu: Add bubt command for flash image burn
Kostya Porotchkin
- [U-Boot] [PATCH v3 3/6] arm64: mvebu: pinctrl: Add pin control driver for A8K family
Kostya Porotchkin
- [U-Boot] Intel e1000 PHY HW reset timeout reasons?
Kostya Porotchkin
- [U-Boot] Missing SCSI block device connected to SATA adapter
Kostya Porotchkin
- [U-Boot] [PATCH v2 00/23] sunxi: Allwinner A64: SPL support
Andre Przywara
- [U-Boot] [PATCH v2 01/23] sun6i: Restrict some register initialization to Allwinner A31 SoC
Andre Przywara
- [U-Boot] [PATCH v2 02/23] armv8: prevent using THUMB
Andre Przywara
- [U-Boot] [PATCH v2 03/23] armv8: add lowlevel_init.S
Andre Przywara
- [U-Boot] [PATCH v2 04/23] SPL: tiny-printf: add "l" modifier
Andre Przywara
- [U-Boot] [PATCH v2 05/23] move UL() macro from armv8/mmu.h into common.h
Andre Przywara
- [U-Boot] [PATCH v2 06/23] SPL: make struct spl_image 64-bit safe
Andre Przywara
- [U-Boot] [PATCH v2 07/23] armv8: add simple sdelay implementation
Andre Przywara
- [U-Boot] [PATCH v2 08/23] armv8: move reset branch into boot hook
Andre Przywara
- [U-Boot] [PATCH v2 09/23] ARM: boot0 hook: remove macro, include whole header file
Andre Przywara
- [U-Boot] [PATCH v2 10/23] sunxi: introduce extra config option for boot0 header
Andre Przywara
- [U-Boot] [PATCH v2 11/23] sunxi: A64: do an RMR switch if started in AArch32 mode
Andre Przywara
- [U-Boot] [PATCH v2 12/23] sunxi: provide default DRAM config for sun50i in Kconfig
Andre Przywara
- [U-Boot] [PATCH v2 13/23] sunxi: H3: add and rename some DRAM contoller registers
Andre Przywara
- [U-Boot] [PATCH v2 14/23] sunxi: H3: add DRAM controller single bit delay support
Andre Przywara
- [U-Boot] [PATCH v2 15/23] sunxi: A64: use H3 DRAM initialization code for A64
Andre Przywara
- [U-Boot] [PATCH v2 16/23] sunxi: H3/A64: fix non-ODT setting
Andre Przywara
- [U-Boot] [PATCH v2 17/23] sunxi: DRAM: fix H3 DRAM size display on aarch64
Andre Przywara
- [U-Boot] [PATCH v2 18/23] sunxi: A64: enable SPL
Andre Przywara
- [U-Boot] [PATCH v2 19/23] SPL: read and store arch property from U-Boot image
Andre Przywara
- [U-Boot] [PATCH v2 20/23] Makefile: use "arm64" architecture for U-Boot image files
Andre Przywara
- [U-Boot] [PATCH v2 21/23] ARM: SPL/FIT: differentiate between arm and arm64 arch properties
Andre Przywara
- [U-Boot] [PATCH v2 22/23] sunxi: introduce RMR switch to enter payloads in 64-bit mode
Andre Przywara
- [U-Boot] [PATCH v2 23/23] sunxi: A64: add 32-bit SPL support
Andre Przywara
- [U-Boot] [PATCH v2 11/23] sunxi: A64: do an RMR switch if started in AArch32 mode
Andre Przywara
- [U-Boot] [PATCH v2 14/23] sunxi: H3: add DRAM controller single bit delay support
Andre Przywara
- [U-Boot] [PATCH v2 08/23] armv8: move reset branch into boot hook
Andre Przywara
- [U-Boot] [RFC PATCH 0/2] ARMv8 Aarch32 support
Andre Przywara
- [U-Boot] [PATCH v2 10/23] sunxi: introduce extra config option for boot0 header
Andre Przywara
- [U-Boot] [PATCH v2 12/23] sunxi: provide default DRAM config for sun50i in Kconfig
Andre Przywara
- [U-Boot] [PATCH v2 23/23] sunxi: A64: add 32-bit SPL support
Andre Przywara
- [U-Boot] [PATCH v2 15/23] sunxi: A64: use H3 DRAM initialization code for A64
Andre Przywara
- [U-Boot] [PATCH v2 23/23] sunxi: A64: add 32-bit SPL support
Andre Przywara
- [U-Boot] [PATCH v2 15/23] sunxi: A64: use H3 DRAM initialization code for A64
Andre Przywara
- [U-Boot] [PATCH v2 23/23] sunxi: A64: add 32-bit SPL support
Andre Przywara
- [U-Boot] [PATCH v2 23/23] sunxi: A64: add 32-bit SPL support
Andre Przywara
- [U-Boot] [PATCH v2 15/23] sunxi: A64: use H3 DRAM initialization code for A64
Andre Przywara
- [U-Boot] [PATCH v2 18/23] sunxi: A64: enable SPL
Andre Przywara
- [U-Boot] [PATCH v3 00/26] sunxi: Allwinner A64: SPL support
Andre Przywara
- [U-Boot] [PATCH v3 01/26] sun6i: Restrict some register initialization to Allwinner A31 SoC
Andre Przywara
- [U-Boot] [PATCH v3 02/26] armv8: prevent using THUMB
Andre Przywara
- [U-Boot] [PATCH v3 03/26] armv8: add lowlevel_init.S
Andre Przywara
- [U-Boot] [PATCH v3 04/26] SPL: tiny-printf: add "l" modifier
Andre Przywara
- [U-Boot] [PATCH v3 05/26] SPL: tiny-printf: ignore "-" modifier
Andre Przywara
- [U-Boot] [PATCH v3 06/26] move UL() macro from armv8/mmu.h into common.h
Andre Przywara
- [U-Boot] [PATCH v3 07/26] SPL: make struct spl_image 64-bit safe
Andre Przywara
- [U-Boot] [PATCH v3 08/26] armv8: add simple sdelay implementation
Andre Przywara
- [U-Boot] [PATCH v3 09/26] armv8: move reset branch into boot hook
Andre Przywara
- [U-Boot] [PATCH v3 10/26] ARM: boot0 hook: remove macro, include whole header file
Andre Przywara
- [U-Boot] [PATCH v3 11/26] sunxi: introduce extra config option for boot0 header
Andre Przywara
- [U-Boot] [PATCH v3 12/26] sunxi: A64: do an RMR switch if started in AArch32 mode
Andre Przywara
- [U-Boot] [PATCH v3 13/26] sunxi: provide default DRAM config for sun50i in Kconfig
Andre Przywara
- [U-Boot] [PATCH v3 14/26] sunxi: H3: Rework MBUS priority setup
Andre Przywara
- [U-Boot] [PATCH v3 15/26] sunxi: H3: add and rename some DRAM contoller registers
Andre Przywara
- [U-Boot] [PATCH v3 16/26] sunxi: H3: add DRAM controller single bit delay support
Andre Przywara
- [U-Boot] [PATCH v3 17/26] sunxi: clocks: Use the correct pattern register for PLL11
Andre Przywara
- [U-Boot] [PATCH v3 18/26] sunxi: A64: use H3 DRAM initialization code for A64 as well
Andre Przywara
- [U-Boot] [PATCH v3 19/26] sunxi: H3/A64: fix non-ODT setting
Andre Przywara
- [U-Boot] [PATCH v3 20/26] sunxi: DRAM: fix H3 DRAM size display on aarch64
Andre Przywara
- [U-Boot] [PATCH v3 21/26] sunxi: A64: enable SPL
Andre Przywara
- [U-Boot] [PATCH v3 22/26] SPL: read and store arch property from U-Boot image
Andre Przywara
- [U-Boot] [PATCH v3 23/26] Makefile: use "arm64" architecture for U-Boot image files
Andre Przywara
- [U-Boot] [PATCH v3 24/26] ARM: SPL/FIT: differentiate between arm and arm64 arch properties
Andre Przywara
- [U-Boot] [PATCH v3 25/26] sunxi: introduce RMR switch to enter payloads in 64-bit mode
Andre Przywara
- [U-Boot] [PATCH v3 26/26] sunxi: A64: add 32-bit SPL support
Andre Przywara
- [U-Boot] [PATCH v2 23/23] sunxi: A64: add 32-bit SPL support
Andre Przywara
- [U-Boot] [PATCH v3 19/26] sunxi: H3/A64: fix non-ODT setting
Andre Przywara
- [U-Boot] [PATCH v3 16/26] sunxi: H3: add DRAM controller single bit delay support
Andre Przywara
- [U-Boot] [PATCH 02/24] sun6i: Restrict some register initialization to Allwinner A31 SoC
André Przywara
- [U-Boot] [PATCH v2 03/23] armv8: add lowlevel_init.S
André Przywara
- [U-Boot] [PATCH v2 13/23] sunxi: H3: add and rename some DRAM contoller registers
André Przywara
- [U-Boot] [PATCH v2 14/23] sunxi: H3: add DRAM controller single bit delay support
André Przywara
- [U-Boot] [PATCH v2 03/23] armv8: add lowlevel_init.S
André Przywara
- [U-Boot] [PATCH v2 23/23] sunxi: A64: add 32-bit SPL support
André Przywara
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Vignesh R
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Vignesh R
- [U-Boot] [PATCH] regulator: fixed: Add support to handle enable-active-high DT property
Vignesh R
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Vignesh R
- [U-Boot] [PATCH RESEND v2 1/2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Vignesh R
- [U-Boot] [PATCH v2 2/2] spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible
Vignesh R
- [U-Boot] [PATCH v2 09/23] ARM: boot0 hook: remove macro, include whole header file
Steve Rae
- [U-Boot] [PATCH v3 10/26] ARM: boot0 hook: remove macro, include whole header file
Steve Rae
- [U-Boot] [PATCH] Fix fastboot boot address
Steve Rae
- [U-Boot] [PATCH] calimain: Update maintainers and their email addresses
Christian Riesch
- [U-Boot] Travis CI
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
- [U-Boot] [GIT PULL] u-boot-mips/master
Tom Rini
- [U-Boot] [PATCH] ts4600: Disable CONFIG_DISPLAY_CPUINFO
Tom Rini
- [U-Boot] [PATCH] travis.yml: Split Freescale ARM job up more
Tom Rini
- [U-Boot] [PATCH v2 1/2] common/board_f.c: align m68k arch to use CONFIG_DISPLAY_CPUINFO
Tom Rini
- [U-Boot] [PATCH v2 2/2] common/board_f.c: align m68k arch to use CONFIG_DISPLAY_CPUINFO
Tom Rini
- [U-Boot] [PATCH v1 1/5] common: scsi: Remove completely unused functions
Tom Rini
- [U-Boot] [PATCH v1 2/5] common: scsi: Make private functions static
Tom Rini
- [U-Boot] [PATCH v1 3/5] cmd: scsi: Make private functions static
Tom Rini
- [U-Boot] [PATCH v1 4/5] scsi: Change scsi_scan() to be able to return value
Tom Rini
- [U-Boot] [PATCH v1 5/5] scsi: Separate SCSI private block description initialization
Tom Rini
- [U-Boot] [PATCH v2 1/3] net: Kconfig: Add CONFIG_MACB option
Tom Rini
- [U-Boot] [PATCH v2 2/2] common/board_f.c: align m68k arch to use CONFIG_DISPLAY_CPUINFO
Tom Rini
- [U-Boot] [PATCH] configs: omap5_uevm_defconfig: Enable LPAE mode
Tom Rini
- [U-Boot] [PATCH] am57xx: Set tps659038 PMIC GPIO7 pad mux value to POWERHOLD
Tom Rini
- [U-Boot] [PATCH] ARM: DRA7: AMxx: Make sure that the SPL always reads the configuration EEPROM
Tom Rini
- [U-Boot] [PATCH] travis-ci: Build mvebu boards (arm & aarch64) in separate job
Tom Rini
- [U-Boot] [PATCH 1/3] arm: baltos: remove TI board leftover
Tom Rini
- [U-Boot] [PATCH 2/3] arm: baltos: active mPCIe slot
Tom Rini
- [U-Boot] [PATCH 3/3] arm: baltos: enable booting from USB
Tom Rini
- [U-Boot] [PATCH 1/5] arm: am57xx: cl-som-am57x: add initial board support
Tom Rini
- [U-Boot] [PATCH 2/5] arm: am57xx: cl-som-am57x: add MMC as a boot devices for spl
Tom Rini
- [U-Boot] [PATCH 3/5] arm: am57xx: cl-som-am57x: fetch board rev from EEPROM
Tom Rini
- [U-Boot] [PATCH 4/5] arm: am57xx: cl-som-am57x: add ETH support
Tom Rini
- [U-Boot] [PATCH 5/5] arm: am57xx: cl-som-am57x: update default env
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Tom Rini
- [U-Boot] [PATCH] davinci: omapl138_lcdk: increase PLL0 frequency
Tom Rini
- [U-Boot] [PATCH] arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT for BBB and am335x-evm
Tom Rini
- [U-Boot] [PATCH v2] disk: convert to Kconfig
Tom Rini
- [U-Boot] [RFC PATCH] mmc: spear: remove the entire spear_sdhci.c file
Tom Rini
- [U-Boot] [GIT PULL] Xilinx and SCSI changes
Tom Rini
- [U-Boot] qemu and u-boot-console and other ports?
Tom Rini
- [U-Boot] Uboot send pull request
Tom Rini
- [U-Boot] [RFC PATCH 0/2] ARMv8 Aarch32 support
Tom Rini
- [U-Boot] qemu and u-boot-console and other ports?
Tom Rini
- [U-Boot] [RFC PATCH 0/2] ARMv8 Aarch32 support
Tom Rini
- [U-Boot] qemu and u-boot-console and other ports?
Tom Rini
- [U-Boot] [U-Boot,1/4] env_sf: factor out prepare_flash_device
Tom Rini
- [U-Boot] [PATCH] arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT for BBB and am335x-evm
Tom Rini
- [U-Boot] [PATCH v2] disk: convert to Kconfig
Tom Rini
- [U-Boot] [U-Boot, 1/9] ARM: dts: am57xx: sync DT with latest Linux
Tom Rini
- [U-Boot] [RFC PATCH 0/2] ARMv8 Aarch32 support
Tom Rini
- [U-Boot] [U-Boot, 1/9] ARM: dts: am57xx: sync DT with latest Linux
Tom Rini
- [U-Boot] [PATCH resend v3 1/6] drivers: usb: gadget: ether: adopt to usb driver model
Tom Rini
- [U-Boot] [U-Boot, v3, 1/2] ARM: ti: consolidate dfu environment variables
Tom Rini
- [U-Boot] [U-Boot,v3,2/2] ARM: am57xx_evm: enable DFU support
Tom Rini
- [U-Boot] compiler.h: use u-boot endian macros on OpenBSD
Tom Rini
- [U-Boot] [U-Boot, RESEND, 01/24] sh4: cache: correct dcache flush to invalidate with write-back
Tom Rini
- [U-Boot] [U-Boot, RESEND, 02/24] sh4: cache: correct flush_cache() to writeback and invalidate
Tom Rini
- [U-Boot] [U-Boot, RESEND, 03/24] sh3: remove unused cache.c file from being built
Tom Rini
- [U-Boot] [U-Boot, RESEND, 04/24] sh: cache use jump_to_P2() and back_to_P1() from asm/system.h
Tom Rini
- [U-Boot] [U-Boot, RESEND, 05/24] sh: cache: don't modify CCR from P1 area
Tom Rini
- [U-Boot] [U-Boot, RESEND, 06/24] sh4: cache: move exported cache manipulation functions into cache.c
Tom Rini
- [U-Boot] [U-Boot, RESEND, 07/24] pci: sh7751: fix up PCI I/O space address
Tom Rini
- [U-Boot] [U-Boot, RESEND, 08/24] pci: sh7751: map PCI memory space into SDRAM
Tom Rini
- [U-Boot] [U-Boot, RESEND, 09/24] sh4: remove __io config options from r2dplus and r7780mp boards
Tom Rini
- [U-Boot] [U-Boot, RESEND, 10/24] r2dplus: use P1 area space for text base and PCI system memory
Tom Rini
- [U-Boot] [U-Boot, RESEND, 11/24] r2dplus: select rtl8139 driver in defconfig
Tom Rini
- [U-Boot] [U-Boot, RESEND, 12/24] common: sh: add necessary define bits to board_f
Tom Rini
- [U-Boot] [U-Boot, RESEND, 13/24] sh4: use single u-boot linker script for all boards
Tom Rini
- [U-Boot] [U-Boot, RESEND, 14/24] sh: place board lowlevel_init code in the beginning of .text
Tom Rini
- [U-Boot] [U-Boot, RESEND, 15/24] sh: define entry point and reloc_dst inside a linker script
Tom Rini
- [U-Boot] [U-Boot, RESEND, 16/24] sh: add MEMORY command to a shared linker script
Tom Rini
- [U-Boot] [U-Boot, RESEND, 17/24] sh: remove undefined DEBUG preprocessor token from board config files
Tom Rini
- [U-Boot] [U-Boot, RESEND, 18/24] sh: define CONFIG_DISPLAY_BOARDINFO to print board information
Tom Rini
- [U-Boot] [U-Boot, RESEND, 19/24] sh: add common dram_init() function for all boards
Tom Rini
- [U-Boot] [U-Boot, RESEND, 20/24] sh: add shared relocate_code() function and call board_init_r()
Tom Rini
- [U-Boot] [U-Boot, RESEND, 21/24] sh4: fix start.S by calling board_init_f() after first code relocation
Tom Rini
- [U-Boot] [U-Boot, RESEND, 22/24] sh: share the correct version of start.S among all cpus
Tom Rini
- [U-Boot] [U-Boot, RESEND, 23/24] sh: generate position independent code for all platforms
Tom Rini
- [U-Boot] [U-Boot, RESEND, 24/24] r2dplus: fixup CONFIG_SYS_TEXT_BASE to account arch/sh changes
Tom Rini
- [U-Boot] configs: am43x: hs: Modify SPL load address to fix UART boot issue
Tom Rini
- [U-Boot] [U-Boot, 1/5] ti_armv7_common: env: Consolidate support for loading images from mmc
Tom Rini
- [U-Boot] [U-Boot, 2/5] ti_armv7_common: env: Add support for loading FIT images
Tom Rini
- [U-Boot] [U-Boot, 3/5] ARM: DRA7: Make FIT boot as default boot on HS devices
Tom Rini
- [U-Boot] [U-Boot, 4/5] ARM: AM57xx: Make FIT boot as default boot on HS devices
Tom Rini
- [U-Boot] [U-Boot, 5/5] ARM: AMx3xx: Make FIT boot as default boot on HS devices
Tom Rini
- [U-Boot] ARM: K2G: DDR3: Fix up priv ID for MPU
Tom Rini
- [U-Boot] [U-Boot, 1/2] usb: xhci: Remove assumption of DWC instance based on DRA7 SoC type
Tom Rini
- [U-Boot] [U-Boot, 2/2] ARM: DRA7x/AM57xx: Get rid of CONFIG_AM57XX
Tom Rini
- [U-Boot] [U-Boot, v3, 1/6] ARM: davinci: Move CONFIG_SYS_DA850_PLL_INIT to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v3, 2/6] ARM: davinci: Move CONFIG_SYS_DA850_DDR_INIT to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v3, 3/6] davinci: omapl138_lcdk: configure pll0
Tom Rini
- [U-Boot] [U-Boot, v3, 4/6] davinci: omapl138_lcdk: configure ddr2
Tom Rini
- [U-Boot] [U-Boot, v3, 5/6] davinci: da850evm: fix empty boot method list in the SPL
Tom Rini
- [U-Boot] [U-Boot, v3, 6/6] davinci: omapl138_lcdk: add u-boot sector for mmc/sd boot
Tom Rini
- [U-Boot] [U-Boot, 1/6] NAND: davinci: add support for NAND chips with 16 bits bus
Tom Rini
- [U-Boot] [U-Boot, 2/6] davinci: omapl138_lcdk: use correct define for 16 bit NAND chips
Tom Rini
- [U-Boot] [U-Boot, 3/6] davinci: omapl138_lcdk: use correct name for CONFIG_SYS_NAND_MASK_CLE
Tom Rini
- [U-Boot] [U-Boot, 4/6] davinci: omapl138_lcdk: use correct name for CONFIG_SYS_NAND_MASK_ALE
Tom Rini
- [U-Boot] [U-Boot, 5/6] davinci: omapl138_lck: remove obsolete define
Tom Rini
- [U-Boot] [U-Boot, 6/6] davinci: omapl138_lcdk: add NAND SPL boot support
Tom Rini
- [U-Boot] [U-Boot,1/2] cmd: Convert CMD_BOOTMENU
Tom Rini
- [U-Boot] [U-Boot, 2/2] Enable DISTRO_DEFAULT on platforms that missed it before
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] davinci: omapl138_lcdk: improve readability of boot command
Tom Rini
- [U-Boot] [U-Boot, v2, 2/2] davinci: omapl138_lcdk: add DT support for EMMC boot
Tom Rini
- [U-Boot] [U-Boot, v3, 1/7] image: Add FIT image loadable section custom processing
Tom Rini
- [U-Boot] [U-Boot, v3, 2/7] image: Add Trusted Execution Environment image type
Tom Rini
- [U-Boot] [U-Boot, v3, 3/7] arm: omap5: Add function to make an SMC call on cpu1
Tom Rini
- [U-Boot] [U-Boot,v3,4/7] arm: omap5: Add TEE loading support
Tom Rini
- [U-Boot] [U-Boot,v3,5/7] arm: omap5: Add OPTEE node to fdt
Tom Rini
- [U-Boot] [U-Boot, v3, 6/7] board: ti: dra7xx: add FIT image TEE processing
Tom Rini
- [U-Boot] [U-Boot, v3, 7/7] board: ti: am57xx: add FIT image TEE processing
Tom Rini
- [U-Boot] [PATCH 00/11] Convert several macros to Kconfig
Tom Rini
- [U-Boot] [PATCH 1/5] arm: am57xx: cl-som-am57x: add initial board support
Tom Rini
- [U-Boot] [PATCH] omap4_sdp4430: Disable SPL_OS_BOOT
Tom Rini
- [U-Boot] Please pull u-boot-dm (take 2)
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx master
Tom Rini
- [U-Boot] [U-Boot,02/12] mtd: cfi_flash: fix indentation
Tom Rini
- [U-Boot] [U-Boot,03/12] net: e1000: fix indentation
Tom Rini
- [U-Boot] [U-Boot, 05/12] net: rtl8169: remove unneeded definition
Tom Rini
- [U-Boot] [U-Boot,06/12] marvell: comphy_a3700: fix bitmask
Tom Rini
- [U-Boot] [U-Boot,07/12] usb: eth: r8152_fw: fix indentation
Tom Rini
- [U-Boot] [U-Boot,08/12] davinci: da8xxevm: fix indentation
Tom Rini
- [U-Boot] [U-Boot, 12/12] usb: gadget: remove unused shortname variable
Tom Rini
- [U-Boot] [U-Boot, 12/12] usb: gadget: remove unused shortname variable
Tom Rini
- [U-Boot] common: image: Remove FIT header update from image post-processing
Tom Rini
- [U-Boot] defconfig: am43xx_evm: Enable DM_SPI and DM_SPI_FLASH
Tom Rini
- [U-Boot] [U-Boot, U-BOOT, TEST, 1/5] Cosmetic api: api_storage.c Align parenthesis
Tom Rini
- [U-Boot] [U-Boot, U-BOOT, TEST, 2/5] Cosmetic api: api_storage.c Blank line after {
Tom Rini
- [U-Boot] [U-Boot, U-BOOT, TEST, 3/5] Cosmetic api: api_storage.c Line over 80 char
Tom Rini
- [U-Boot] [U-Boot, U-BOOT, TEST, 4/5] Cosmetic api: api_storage.c Comment style
Tom Rini
- [U-Boot] [U-Boot, U-BOOT, TEST, 5/5] Cosmetic api: api_storage.c Spelling correction
Tom Rini
- [U-Boot] [U-Boot, v2, 1/3] ARM: OMAP4+: Add support for dynamically selecting OPPs
Tom Rini
- [U-Boot] [U-Boot, v2, 2/3] ARM: DRA7: Redefine voltage and efuse macros per OPP using Kconfig
Tom Rini
- [U-Boot] [U-Boot, v2, 3/3] ARM: DRA7: Fixup DSPEVE, IVA and GPU clock frequencies based on OPP
Tom Rini
- [U-Boot] [U-Boot, 01/11] board: ti: dra71x-evm: Add epprom support
Tom Rini
- [U-Boot] [U-Boot, 02/11] board: ti: dra71x-evm: Add mux settings
Tom Rini
- [U-Boot] [U-Boot, 03/11] board: ti: dra72: Introduce optimization for rgmii timing for rev C
Tom Rini
- [U-Boot] [U-Boot, 04/11] board: ti: dra71x-evm: Add PMIC support
Tom Rini
- [U-Boot] [U-Boot, 05/11] ARM: OMAP4+: Add support for getting pbias info from board
Tom Rini
- [U-Boot] [U-Boot, 06/11] ARM: dts: dra7xx: sync DT with latest Linux
Tom Rini
- [U-Boot] [U-Boot,07/11] ARM: dts: dra71x-evm: Add DT support
Tom Rini
- [U-Boot] [U-Boot, 08/11] configs: ti_omap5_common: Select dtb name for dra71x
Tom Rini
- [U-Boot] [U-Boot,09/11] configs: dra7xx: hs: Enable DM_ETH
Tom Rini
- [U-Boot] [U-Boot, 10/11] configs: dra7xx: Enable pmic/regulator options
Tom Rini
- [U-Boot] [U-Boot,11/11] configs: dra7xx: Enable lp873x options
Tom Rini
- [U-Boot] post: cosmetic: fix typo
Tom Rini
- [U-Boot] [U-Boot, v2, 1/4] serial: Update docs to indicate mcfuart supports DM_SERIAL
Tom Rini
- [U-Boot] [U-Boot,v2,2/4] arm: Remove smdk2410 board
Tom Rini
- [U-Boot] [U-Boot,v2,3/4] arm: Remove VCMA9 board
Tom Rini
- [U-Boot] [U-Boot, v2, 4/4] serial: Drop the s3c24x0 serial driver
Tom Rini
- [U-Boot] [U-Boot, 1/9] ARM: dts: am57xx: sync DT with latest Linux
Tom Rini
- [U-Boot] [U-Boot, 2/9] board: ti: am57xx: Add support for detection of reva3 variations for GPEVM
Tom Rini
- [U-Boot] [U-Boot, 3/9] board: ti: am57xx: Add support for detection of X15 revb1
Tom Rini
- [U-Boot] [U-Boot, 4/9] board: ti: am57xx: Update SR1.1 RGMII0 iodelay timings for x15/GPEVM
Tom Rini
- [U-Boot] [U-Boot, 5/9] board: ti: am572x: Add pinmux for X15/GPEVM SR2.0 using latest PMT
Tom Rini
- [U-Boot] [U-Boot, 6/9] board: ti: am572x-idk: Update pinmux using latest PMT
Tom Rini
- [U-Boot] [U-Boot, 7/9] board: ti: am57xx: Add support for the am571x idk
Tom Rini
- [U-Boot] [U-Boot,8/9] ARM: dts: AM571x-IDK Initial Support
Tom Rini
- [U-Boot] [U-Boot, 9/9] ti_armv7_common: env: Increase IO buffer size
Tom Rini
- [U-Boot] [PATCH] omap4_sdp4430: Disable SPL_OS_BOOT
Tom Rini
- [U-Boot] [PATCH v2 1/4] arm: am57xx: cl-som-am57x: add initial board support
Tom Rini
- [U-Boot] [PATCH v2 3/4] arm: am57xx: cl-som-am57x: add ETH support
Tom Rini
- [U-Boot] [PATCH v3] disk: convert to Kconfig
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] [PATCH 2/6] mmc: complete the unfinished move of CONFIG_MMC
Tom Rini
- [U-Boot] [PATCH 4/6] mmc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCI
Tom Rini
- [U-Boot] check_config.sh produces false positive error?
Tom Rini
- [U-Boot] [PATCH] elf: use program header for loading
Tom Rini
- [U-Boot] [RFC PACH v2 1/1] Add vexpress_aemv8a_aarch32 variant
Tom Rini
- [U-Boot] [RFC PACH v2 1/1] Add vexpress_aemv8a_aarch32 variant
Tom Rini
- [U-Boot] [PATCH] davinci: omapl138_lcdk: boot from zImage
Tom Rini
- [U-Boot] [PATCH 1/2] davinci: omapl138_lcdk: increase u-boot load size
Tom Rini
- [U-Boot] [PATCH 2/2] davinci: omapl138_lcdk: fix bad NAND ECC config
Tom Rini
- [U-Boot] [PATCH 5/6] mmc: move some SDHCI related options to Kconfig
Tom Rini
- [U-Boot] [PATCH 3/6] mmc: make MMC driver entries dependent on MMC
Tom Rini
- [U-Boot] [PATCH 6/6] mmc: move MMC_SDHCI_IO_ACCESSORS to Kconfig
Tom Rini
- [U-Boot] [PATCH v2 03/23] armv8: add lowlevel_init.S
Tom Rini
- [U-Boot] [PATCH v2 02/23] armv8: prevent using THUMB
Tom Rini
- [U-Boot] [PATCH v2 06/23] SPL: make struct spl_image 64-bit safe
Tom Rini
- [U-Boot] [PATCH v2 19/23] SPL: read and store arch property from U-Boot image
Tom Rini
- [U-Boot] [PATCH v2 20/23] Makefile: use "arm64" architecture for U-Boot image files
Tom Rini
- [U-Boot] [PATCH v2 21/23] ARM: SPL/FIT: differentiate between arm and arm64 arch properties
Tom Rini
- [U-Boot] Please pull from u-boot-i2c
Tom Rini
- [U-Boot] Please pull u-boot-fsl-qoriq master
Tom Rini
- [U-Boot] [ANN] U-Boot v2017.01-rc1 released
Tom Rini
- [U-Boot] [PATCH 1/2] defconfigs: dra7xx_hs_evm: Add default OPTEE load address
Tom Rini
- [U-Boot] [PATCH 2/2] defconfigs: am57xx_hs_evm: Add default OPTEE load address
Tom Rini
- [U-Boot] [PATCH v2 03/23] armv8: add lowlevel_init.S
Tom Rini
- [U-Boot] [PATCH 2/6] mmc: complete the unfinished move of CONFIG_MMC
Tom Rini
- [U-Boot] [PATCH 0/3] SPL: move CONFIG_SPL_*_LOAD to Kconfig
Tom Rini
- [U-Boot] [PATCH v2] davinci: omapl138_lcdk: boot from zImage
Tom Rini
- [U-Boot] [PATCH 0/3] SPL: move CONFIG_SPL_*_LOAD to Kconfig
Tom Rini
- [U-Boot] [PATCH] tools: mkimage: Use fstat instead of stat to avoid malicious hacks
Tom Rini
- [U-Boot] [PATCH 5/6] mmc: move some SDHCI related options to Kconfig
Tom Rini
- [U-Boot] [GIT PULL] Xilinx and SCSI changes
Tom Rini
- [U-Boot] [PATCH] travis-ci: Switch to building QEMU
Tom Rini
- [U-Boot] [PATCH v2] arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT for BBB and am335x-evm
Tom Rini
- [U-Boot] [PATCH v2 5/6] mmc: move some SDHCI related options to Kconfig
Tom Rini
- [U-Boot] [PULL] u-boot-socfpga/master
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PATCH v5 1/6] ARMv8: LS1043A: change macro CONFIG_ARMV8_PSCI definition
Tom Rini
- [U-Boot] [PATCH v5 2/6] ARMv8: Add secure sections for PSCI text and data
Tom Rini
- [U-Boot] [PATCH v3 1/4] arm: am57xx: cl-som-am57x: add initial board support
Tom Rini
- [U-Boot] [GIT PULL] Xilinx and SCSI changes
Tom Rini
- [U-Boot] [PATCH 1/1] arm: mach-omap2: Fix secure file generation
Tom Rini
- [U-Boot] [GIT PULL] Xilinx and SCSI changes
Tom Rini
- [U-Boot] [GIT PULL] Xilinx and SCSI changes
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] [PATCH v3] arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT for BBB and am335x-evm
Tom Rini
- [U-Boot] [PATCH 2/7] disk: Add CONFIG_PARTITION to Kconfig
Tom Rini
- [U-Boot] [GIT PULL] Xilinx and SCSI changes
Tom Rini
- [U-Boot] Makefile: Fix linking with modern binutils
Tom Rini
- [U-Boot] [PATCH] imgtec: Update MAINTAINERS for more config files
Tom Rini
- [U-Boot] [PATCH] travis-ci: Switch to building QEMU
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] [U-Boot, 1/1] arm: mach-omap2: Fix secure file generation
Tom Rini
- [U-Boot] [U-Boot, 1/1] arm: mach-omap2: Fix secure file generation
Tom Rini
- [U-Boot] [U-Boot, 1/1] arm: mach-omap2: Fix secure file generation
Tom Rini
- [U-Boot] [PATCH] imgtec: Update MAINTAINERS for more config files
Tom Rini
- [U-Boot] arm: armv7: add us timer for bootstage
Tom Rini
- [U-Boot] configs: omap5_uevm_defconfig: Enable LPAE mode
Tom Rini
- [U-Boot] am57xx: Set tps659038 PMIC GPIO7 pad mux value to POWERHOLD
Tom Rini
- [U-Boot] [U-Boot, v2, 1/8] spl: Use a single underscore in the SPL_LOAD_IMAGE_METHOD() macro
Tom Rini
- [U-Boot] [U-Boot, v2, 2/8] spl: Add a name to the SPL load-image methods
Tom Rini
- [U-Boot] [U-Boot, v2, 3/8] spl: Move the loading code into its own function
Tom Rini
- [U-Boot] [U-Boot, v2, 4/8] spl: Pass the loader into spl_load_image()
Tom Rini
- [U-Boot] [U-Boot,v2,5/8] spl: Drop announce_boot_device()
Tom Rini
- [U-Boot] [U-Boot, v2, 6/8] spl: sunxi: Drop spl_board_announce_boot_device()
Tom Rini
- [U-Boot] [U-Boot, v2, 7/8] spl: uniphier: Drop spl_board_announce_boot_device()
Tom Rini
- [U-Boot] [U-Boot, v2, 8/8] spl: sandbox: Drop spl_board_announce_boot_device()
Tom Rini
- [U-Boot] [U-Boot, v4, 1/1] cmd: pci: add option to parse and display BAR information
Tom Rini
- [U-Boot] [U-Boot, 1/2] davinci: omapl138_lcdk: increase u-boot load size
Tom Rini
- [U-Boot] [U-Boot, 2/2] davinci: omapl138_lcdk: fix bad NAND ECC config
Tom Rini
- [U-Boot] [U-Boot, 1/2] defconfigs: dra7xx_hs_evm: Add default OPTEE load address
Tom Rini
- [U-Boot] [U-Boot, 2/2] defconfigs: am57xx_hs_evm: Add default OPTEE load address
Tom Rini
- [U-Boot] [U-Boot,v2] davinci: omapl138_lcdk: boot from zImage
Tom Rini
- [U-Boot] tools: mkimage: Use fstat instead of stat to avoid malicious hacks
Tom Rini
- [U-Boot] travis-ci: Switch to building QEMU
Tom Rini
- [U-Boot] [U-Boot, 1/1] arm: mach-omap2: Fix secure file generation
Tom Rini
- [U-Boot] calimain: Update maintainers and their email addresses
Tom Rini
- [U-Boot] [U-Boot, v3] arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT for BBB and am335x-evm
Tom Rini
- [U-Boot] [PATCH] elf: use program header for loading
Tom Rini
- [U-Boot] [RFC PATCH 0/3] spl: Add D-cache support
Tom Rini
- [U-Boot] [U-Boot, 1/1] arm: mach-omap2: Fix secure file generation
Tom Rini
- [U-Boot] genext2fs fix for supporting filesystems generated by genext2fs
Tom Rini
- [U-Boot] [PATCH 1/2] lib: Add WATCHDOG_RESET to wait_bit.h
Tom Rini
- [U-Boot] pull request: u-boot-uniphier/master
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] [PATCH] MAINTAINERS: ONENAND: MTD: Mark Samsung's OneNAND as orphaned
Tom Rini
- [U-Boot] [PATCH] MAINTAINERS: DFU: Change e-mail address for DFU maintainer
Tom Rini
- [U-Boot] [RFC PATCH 0/3] spl: Add D-cache support
Tom Rini
- [U-Boot] Makefile: Fix linking with modern binutils
Tom Rini
- [U-Boot] [RFC PATCH 0/3] spl: Add D-cache support
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] Many unused variable warnings
Tom Rini
- [U-Boot] [RFC] cmd: mem: Allow 'cp' to use the optimized memcpy
Tom Rini
- [U-Boot] [PATCH 3/3] mx6: Select CONFIG_USE_ARCH_MEMCPY
Tom Rini
- [U-Boot] [PATCH 1/2] armv8: Enable CPUECTLR.SMPEN for coherency
Tom Rini
- [U-Boot] [PATCH 1/2] armv8: Enable CPUECTLR.SMPEN for coherency
Tom Rini
- [U-Boot] Pull request v2: u-boot-spi/master
Tom Rini
- [U-Boot] [PATCH v2 3/4] Kconfig: Move USE_ARCH_MEMCPY/MEMSET to Kconfig
Tom Rini
- [U-Boot] Pull request v2: u-boot-spi/master
Tom Rini
- [U-Boot] Pull request v2: u-boot-spi/master
Tom Rini
- [U-Boot] Pull request v2: u-boot-spi/master
Tom Rini
- [U-Boot] [PATCH v3] Kconfig: Move USE_ARCH_MEMCPY/MEMSET to Kconfig
Tom Rini
- [U-Boot] Please pull u-boot-fsl-qoriq master
Tom Rini
- [U-Boot] [PATCH v2 4/4] cmd: mem: Use memcpy for 'cp' command
Tom Rini
- [U-Boot] [PATCH] cmd/Kconfig: Fix typo in CMD_MEMORY help text
Tom Rini
- [U-Boot] [U-Boot,v6,11/13] sunxi: Use binman for sunxi boards
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
- [U-Boot] [U-Boot,01/13] serial: 16550: Add getfcr accessor
Tom Rini
- [U-Boot] [U-Boot, 02/13] serial: 16550: Add port type as driver data
Tom Rini
- [U-Boot] [U-Boot, 03/13] serial: 16550: Add Ingenic JZ4780 support
Tom Rini
- [U-Boot] ARM: mxs: Remove unused variable warning
Tom Rini
- [U-Boot] [U-Boot, V2] tools: mxsimage: Fix build with OpenSSL 1.1.x
Tom Rini
- [U-Boot] [ANN] U-Boot v2017.01-rc2 released
Tom Rini
- [U-Boot] [PATCH 1/3] ARM: revive CONFIG_USE_ARCH_MEMCPY/MEMSET for UniPhier and Tegra
Tom Rini
- [U-Boot] [PATCH 3/3] README: remove description about CONFIG_USE_ARCH_MEMCPY/SET
Tom Rini
- [U-Boot] [PATCH 2/3] common/init: remove meaningless defined(CONFIG_USE_ARCH_MEMSET)
Tom Rini
- [U-Boot] [PATCH v2 4/4] cmd: mem: Use memcpy for 'cp' command
Tom Rini
- [U-Boot] [PATCH 1/3] ARM: revive CONFIG_USE_ARCH_MEMCPY/MEMSET for UniPhier and Tegra
Tom Rini
- [U-Boot] Please pull from u-boot-i2c
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [GIT PULL] Xilinx fixes
Tom Rini
- [U-Boot] [PATCH v2 1/2] Convert CONFIG_SPL_RAM_DEVICE to defconfig
Tom Rini
- [U-Boot] [PATCH v2 2/2] spl: move RAM boot support in separate file
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx master
Tom Rini
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Tom Rini
- [U-Boot] please pull u-boot-samsung master
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] Please pull u-boot-x86
Tom Rini
- [U-Boot] Pull request: u-boot-sunxi/master
Tom Rini
- [U-Boot] [RFC PATCH] pcf2127: add watchdog support
Tom Rini
- [U-Boot] [PATCH v2] Makefile: Fix linking with modern binutils
Tom Rini
- [U-Boot] [PATCH v2 0/6] mmc: move some config options to Kconfig
Tom Rini
- [U-Boot] [PATCH] fs/ext4: Initialize group descriptor size for revision level 0 filesystems
Tom Rini
- [U-Boot] [U-Boot, v3, 1/4] arm: am57xx: cl-som-am57x: add initial board support
Tom Rini
- [U-Boot] Pull request: u-boot-sunxi/master
Tom Rini
- [U-Boot] regulator: fixed: Add support to handle enable-active-high DT property
Tom Rini
- [U-Boot] [U-Boot,v3] timer: Support clocks via phandle
Tom Rini
- [U-Boot] relocate-rela: use compiler.h endian macros
Tom Rini
- [U-Boot] [U-Boot,v2] fat: fatwrite: fix the command for FAT12
Tom Rini
- [U-Boot] cmd/Kconfig: Fix typo in CMD_MEMORY help text
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] fs/fat: Avoid corruption of sectors following the FAT
Tom Rini
- [U-Boot] [U-Boot, v2, 2/2] fs/fat: merge readwrite get_fatent_value() with readonly get_fatent()
Tom Rini
- [U-Boot] fs/fat: simplify get_fatent for FAT12
Tom Rini
- [U-Boot] MAINTAINERS, git-mailrc: update the Power maintainer
Tom Rini
- [U-Boot] [U-Boot, 1/3] ARM: revive CONFIG_USE_ARCH_MEMCPY/MEMSET for UniPhier and Tegra
Tom Rini
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Tom Rini
- [U-Boot] [U-Boot, 3/3] README: remove description about CONFIG_USE_ARCH_MEMCPY/SET
Tom Rini
- [U-Boot] tools: mkimage: Call fclose in error path
Tom Rini
- [U-Boot] Update Maintainer and Auther's email address
Tom Rini
- [U-Boot] disk: Fixed capacity message
Tom Rini
- [U-Boot] fs/ext4: Initialize group descriptor size for revision level 0 filesystems
Tom Rini
- [U-Boot] cmd: net: fix function name in comment
Tom Rini
- [U-Boot] board: samsung: update the MAINTAINERS file
Tom Rini
- [U-Boot] imx: mx6sllevk: add MAINTAINERS file
Tom Rini
- [U-Boot] [U-Boot,v2,1/6] Sync defconfig files by savedefconfig
Tom Rini
- [U-Boot] [U-Boot, v2, 2/6] mmc: complete unfinished move of CONFIG_MMC
Tom Rini
- [U-Boot] [U-Boot, v2, 3/6] mmc: make MMC driver entries dependent on MMC
Tom Rini
- [U-Boot] [U-Boot, v2, 4/6] mmc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCI
Tom Rini
- [U-Boot] [U-Boot, v2, 5/6] mmc: move some SDHCI related options to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v2, 6/6] mmc: move MMC_SDHCI_IO_ACCESSORS to Kconfig
Tom Rini
- [U-Boot] [PATCHv2] power: change from meaningless value to error number
Tom Rini
- [U-Boot] [PATCH v2 01/23] sun6i: Restrict some register initialization to Allwinner A31 SoC
Maxime Ripard
- [U-Boot] [PATCH v2 02/23] armv8: prevent using THUMB
Maxime Ripard
- [U-Boot] [PATCH 06/17] dm: Add callback to modify the device tree
Maxime Ripard
- [U-Boot] [PATCH v2 13/14] sunxi: Sync GR8 DTS and AXP209 with the kernel
Maxime Ripard
- [U-Boot] [PATCH v2 06/23] SPL: make struct spl_image 64-bit safe
Maxime Ripard
- [U-Boot] [PATCH v2 10/23] sunxi: introduce extra config option for boot0 header
Maxime Ripard
- [U-Boot] [PATCH v2 11/23] sunxi: A64: do an RMR switch if started in AArch32 mode
Maxime Ripard
- [U-Boot] [PATCH v2 12/23] sunxi: provide default DRAM config for sun50i in Kconfig
Maxime Ripard
- [U-Boot] [PATCH v2 13/23] sunxi: H3: add and rename some DRAM contoller registers
Maxime Ripard
- [U-Boot] [PATCH v2 14/23] sunxi: H3: add DRAM controller single bit delay support
Maxime Ripard
- [U-Boot] [PATCH v2 15/23] sunxi: A64: use H3 DRAM initialization code for A64
Maxime Ripard
- [U-Boot] [PATCH v2 23/23] sunxi: A64: add 32-bit SPL support
Maxime Ripard
- [U-Boot] [PATCH] sunxi: enable H3 EMAC for the nanopi neo
Maxime Ripard
- [U-Boot] [PATCH RESEND 7/9] video: Allow board hook before video init
Maxime Ripard
- [U-Boot] [PATCH] sunxi: move CONFIG_SATAPWR to Kconfig option
Maxime Ripard
- [U-Boot] [PATCH v2 0/14] sunxi: Add support for the CHIP Pro
Maxime Ripard
- [U-Boot] [PATCH v2 15/23] sunxi: A64: use H3 DRAM initialization code for A64
Maxime Ripard
- [U-Boot] [PATCH v2 12/23] sunxi: provide default DRAM config for sun50i in Kconfig
Maxime Ripard
- [U-Boot] [PATCH v2 23/23] sunxi: A64: add 32-bit SPL support
Maxime Ripard
- [U-Boot] [RFC PATCH 1/3] sunxi: Add clocks for DE2/HDMI/TCON
Maxime Ripard
- [U-Boot] [RFC PATCH 2/3] sunxi: video: Add video driver for H3 SoC
Maxime Ripard
- [U-Boot] [RFC PATCH 0/3] sunxi: video: Add support for HDMI output on H3
Maxime Ripard
- [U-Boot] [linux-sunxi] Re: [RFC PATCH 0/3] sunxi: video: Add support for HDMI output on H3
Maxime Ripard
- [U-Boot] [RFC PATCH 2/3] sunxi: video: Add video driver for H3 SoC
Maxime Ripard
- [U-Boot] [PATCH 1/2] libfdt: overlay: Fix missing symbols condition
Maxime Ripard
- [U-Boot] [PATCH 2/2] cmd: fdt: Print error message when fdt application fails
Maxime Ripard
- [U-Boot] [PATCH v2 23/23] sunxi: A64: add 32-bit SPL support
Maxime Ripard
- [U-Boot] [PATCH v2 23/23] sunxi: A64: add 32-bit SPL support
Maxime Ripard
- [U-Boot] [PATCH v2 23/23] sunxi: A64: add 32-bit SPL support
Maxime Ripard
- [U-Boot] [PATCH v3 12/26] sunxi: A64: do an RMR switch if started in AArch32 mode
Maxime Ripard
- [U-Boot] [PATCH v3 13/26] sunxi: provide default DRAM config for sun50i in Kconfig
Maxime Ripard
- [U-Boot] [PATCH v3 14/26] sunxi: H3: Rework MBUS priority setup
Maxime Ripard
- [U-Boot] [PATCH v3 16/26] sunxi: H3: add DRAM controller single bit delay support
Maxime Ripard
- [U-Boot] [PATCH v3 17/26] sunxi: clocks: Use the correct pattern register for PLL11
Maxime Ripard
- [U-Boot] [PATCH v3 18/26] sunxi: A64: use H3 DRAM initialization code for A64 as well
Maxime Ripard
- [U-Boot] [PATCH v3 19/26] sunxi: H3/A64: fix non-ODT setting
Maxime Ripard
- [U-Boot] [PATCH v3 20/26] sunxi: DRAM: fix H3 DRAM size display on aarch64
Maxime Ripard
- [U-Boot] [PATCH v3 21/26] sunxi: A64: enable SPL
Maxime Ripard
- [U-Boot] [PATCH v3 25/26] sunxi: introduce RMR switch to enter payloads in 64-bit mode
Maxime Ripard
- [U-Boot] [PATCH v3 26/26] sunxi: A64: add 32-bit SPL support
Maxime Ripard
- [U-Boot] [PATCH 1/2] libfdt: overlay: Fix missing symbols condition
Maxime Ripard
- [U-Boot] [RFC PATCH 2/3] sunxi: video: Add video driver for H3 SoC
Maxime Ripard
- [U-Boot] [PATCH] sunxi: fix SID read on H3
Maxime Ripard
- [U-Boot] [linux-sunxi] Re: [RFC PATCH 0/3] sunxi: video: Add support for HDMI output on H3
Maxime Ripard
- [U-Boot] [PATCH v3 19/26] sunxi: H3/A64: fix non-ODT setting
Maxime Ripard
- [U-Boot] [PATCH v3 16/26] sunxi: H3: add DRAM controller single bit delay support
Maxime Ripard
- [U-Boot] [PATCH 1/2] sunxi: add proper device tree for Lichee Pi One
Maxime Ripard
- [U-Boot] [PATCH 2/2] sunxi: add support for Lichee Pi One device
Maxime Ripard
- [U-Boot] [PATCH] sunxi: add an environment variable for boot media
Maxime Ripard
- [U-Boot] [RFC PATCH 0/2] ARMv8 Aarch32 support
Peter Robinson
- [U-Boot] Targets for BeagleBones
Peter Robinson
- [U-Boot] [PATCH v2] dm: core: Add dev_get_addr_size_index() to retrieve addr and size
Stefan Roese
- [U-Boot] [PATCH 02/17] arm: mvebu: Add gpio support
Stefan Roese
- [U-Boot] [PATCH 04/17] mvebu: Add board_pex_config()
Stefan Roese
- [U-Boot] [PATCH 06/17] dm: Add callback to modify the device tree
Stefan Roese
- [U-Boot] [PATCH 07/17] lib: tpm: Add command to flush resources
Stefan Roese
- [U-Boot] [PATCH 15/17] arm: mvebu: Implement secure boot
Stefan Roese
- [U-Boot] [PATCH 16/17] arm: mvebu: Add gdsys ControlCenter-Compact board
Stefan Roese
- [U-Boot] [PATCH] travis-ci: Build mvebu boards (arm & aarch64) in separate job
Stefan Roese
- [U-Boot] [RFC PATCH v1] mvebu: db-88f6820-amc: Enable FIT support
Stefan Roese
- [U-Boot] [PATCH] arm: mvebu: move SYS_MVEBU_PLL_CLOCK to Kconfig
Stefan Roese
- [U-Boot] [PATCH] tools/kwbimage: add BAUDRATE option
Stefan Roese
- [U-Boot] [PATCH] tools/kwbimage: add DEBUG option
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] [PATCH] net: phy: Improve the Marvell 151x constants
Stefan Roese
- [U-Boot] [PATCH 12/15 v2] pci: mvebu: Add PCIe driver for Armada-8K
Stefan Roese
- [U-Boot] [PATCH 12/15 v2] pci: mvebu: Add PCIe driver for Armada-8K
Stefan Roese
- [U-Boot] [PATCH] sata: sata_mv: Fix misaligned cache warnings
Stefan Roese
- [U-Boot] [PATCH 01/15] arm64: mvebu: Rename db-88f7040 files to armada-8k
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] [PATCH v2 1/6] arm64: mvebu: Modify the A8K SPI and I2C config in DTS
Stefan Roese
- [U-Boot] [PATCH v2 2/6] arm64: mvebu: Add bubt command for flash image burn
Stefan Roese
- [U-Boot] [PATCH v2 4/6] arm64: mvebu: Add pin control nodes to A8K family DTS files
Stefan Roese
- [U-Boot] [PATCH v2 1/6] arm64: mvebu: Modify the A8K SPI and I2C config in DTS
Stefan Roese
- [U-Boot] [PATCH v2 2/6] arm64: mvebu: Add bubt command for flash image burn
Stefan Roese
- [U-Boot] [PATCH 1/5] net: phy: Fix mask so that we can identify Marvell 88E1518
Stefan Roese
- [U-Boot] [PATCH 2/5] net: phy: Add support for Marvell M88E1512
Stefan Roese
- [U-Boot] [PATCH 3/5] net: phy: Marvell 88E151x: Add support for RGMII
Stefan Roese
- [U-Boot] [PATCH 4/5] net: phy: Marvell 88E151x: Increase delay after init
Stefan Roese
- [U-Boot] [PATCH 5/5] net: phy: Marvell: Use phy_interface_is_rgmii helper function
Stefan Roese
- [U-Boot] [PATCH 2/5] net: phy: Add support for Marvell M88E1512
Stefan Roese
- [U-Boot] [PATCH v2 2/5] net: phy: Add support for Marvell M88E1512
Stefan Roese
- [U-Boot] [PATCH 1/3] arm64: mvebu: Add L3 cache flush functionality to A8K family
Stefan Roese
- [U-Boot] [PATCH v3 1/6] arm64: mvebu: Modify the A8K SPI and I2C config in DTS
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] [PATCH 2/2] spl: move RAM boot support in separate file
Stefan Roese
- [U-Boot] [PATCH] i2c: mv_i2c.c: Correct address endianness
Stefan Roese
- [U-Boot] [PATCH v2] arm64: mvebu: Fix A8K memory mapping and add documentation
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] [RFC PATCH] ARM: zynq: Replace dram_init* functions with board_init_f safe ones
Nathan Rossi
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Nathan Rossi
- [U-Boot] [PATCH 1/3] fdt: add memory bank decoding functions for board setup
Nathan Rossi
- [U-Boot] [PATCH 2/3] ARM: zynq: Replace board specific with generic memory bank decoding
Nathan Rossi
- [U-Boot] [PATCH 3/3] ARM64: zynqmp: Replace board specific with generic memory bank decoding
Nathan Rossi
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Nathan Rossi
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Nathan Rossi
- [U-Boot] [PATCH 1/3] fdt: add memory bank decoding functions for board setup
Nathan Rossi
- [U-Boot] [PATCH v2 0/3] Add generic FDT memory bank decoding and gd initialization
Nathan Rossi
- [U-Boot] [PATCH v2 1/3] fdt: add memory bank decoding functions for board setup
Nathan Rossi
- [U-Boot] [PATCH v2 2/3] ARM: zynq: Replace board specific with generic memory bank decoding
Nathan Rossi
- [U-Boot] [PATCH v2 3/3] ARM64: zynqmp: Replace board specific with generic memory bank decoding
Nathan Rossi
- [U-Boot] [PATCH v3 0/3] Add generic FDT memory bank decoding and gd initialization
Nathan Rossi
- [U-Boot] [PATCH v3 1/3] fdt: add memory bank decoding functions for board setup
Nathan Rossi
- [U-Boot] [PATCH v3 2/3] ARM: zynq: Replace board specific with generic memory bank decoding
Nathan Rossi
- [U-Boot] [PATCH v3 3/3] ARM64: zynqmp: Replace board specific with generic memory bank decoding
Nathan Rossi
- [U-Boot] How to take value of an environmental variable of uboot in linux
Måns Rullgård
- [U-Boot] Makefile: Fix linking with modern binutils
Måns Rullgård
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Eldor Rødseth
- [U-Boot] [PATCH] board: freescale: ls2080a: Intergrate and enable PPA on LS2080A
Abhimanyu Saini
- [U-Boot] VAR-SOM-MX6 - Boot Count Limit support?
Otavio Salvador
- [U-Boot] Use of QEMU UEFI payland with persistent environment
Otavio Salvador
- [U-Boot] Use of QEMU UEFI payland with persistent environment
Otavio Salvador
- [U-Boot] [PATCH] arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT for BBB and am335x-evm
Jyri Sarha
- [U-Boot] [PATCH] arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT for BBB and am335x-evm
Jyri Sarha
- [U-Boot] [PATCH] arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT for BBB and am335x-evm
Jyri Sarha
- [U-Boot] [PATCH v2] arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT for BBB and am335x-evm
Jyri Sarha
- [U-Boot] [PATCH v2] arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT for BBB and am335x-evm
Jyri Sarha
- [U-Boot] [PATCH v3] arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT for BBB and am335x-evm
Jyri Sarha
- [U-Boot] [PATCH 06/14] net: core: Using an ethernet address from ROM is not bad
Olliver Schinagl
- [U-Boot] [PATCH 07/14] net: core: Inform the user of the device MAC address
Olliver Schinagl
- [U-Boot] [PATCH 09/14] net: Add ability to set MAC address via EEPROM
Olliver Schinagl
- [U-Boot] [PATCH 12/14] fdt: eth_fixup: Add hook for board to override MAC
Olliver Schinagl
- [U-Boot] [PATCH] net: zynq_gem: Return 0 on success, not -ENOSYS
Olliver Schinagl
- [U-Boot] [PATCH 04/14] net: core: Sanitize get/set operations for enetaddr
Olliver Schinagl
- [U-Boot] [PATCH 12/14] fdt: eth_fixup: Add hook for board to override MAC
Olliver Schinagl
- [U-Boot] [PATCH 12/14] fdt: eth_fixup: Add hook for board to override MAC
Olliver Schinagl
- [U-Boot] [PATCH 12/14] fdt: eth_fixup: Add hook for board to override MAC
Olliver Schinagl
- [U-Boot] [PATCH 0/5] Convert omap24xx-i2c driver to Driver Model
Heiko Schocher
- [U-Boot] [PATCH 1/6] arm: exynos: i2c: Convert exynos boards to use DM_I2C
Heiko Schocher
- [U-Boot] [PATCH 2/6] arm: samsung: Convert s5p_goni and smdkc100 to DM_I2C
Heiko Schocher
- [U-Boot] [PATCH 3/6] samsung: i2c: Drop old code from I2C driver
Heiko Schocher
- [U-Boot] [PATCH 4/6] samsung: i2c: Split the high-speed I2C code into a new driver
Heiko Schocher
- [U-Boot] [PATCH 5/6] dm: i2c: Add a note to I2C drivers which need conversion
Heiko Schocher
- [U-Boot] [PATCH 6/6] dm: Add timeline and guide for porting I2C drivers
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c
Heiko Schocher
- [U-Boot] [PATCH v3 10/13] i2c: Kconfig: Add SYS_I2C_MXC entry
Heiko Schocher
- [U-Boot] [PATCH v3 11/13] i2c: mxc: Print hex instead of decimal for bus address
Heiko Schocher
- [U-Boot] [PATCH v3 12/13] i2c: mxc: Make 'no gpio pinctrl state' print as debug
Heiko Schocher
- [U-Boot] [PATCH v3 13/13] imx6: icorem6: Add I2C support
Heiko Schocher
- [U-Boot] How to make I2C probe like commands working in u-boot
Heiko Schocher
- [U-Boot] [PATCH] i2c: mv_i2c.c: Correct address endianness
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c
Heiko Schocher
- [U-Boot] [PATCH] travis-ci: Switch to building QEMU
Daniel Schwierzeck
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Chin Liang See
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
See, Chin Liang
- [U-Boot] Altera Cyclone5 - U-Boot SPL looping
Léo Serre
- [U-Boot] eeprom - spi collides with i2c
Ran Shalit
- [U-Boot] eeprom with i2c (instead spi)
Ran Shalit
- [U-Boot] [PATCH] cmd: net: fix function name in comment
Baruch Siach
- [U-Boot] [PATCH v2 04/23] SPL: tiny-printf: add "l" modifier
Siarhei Siamashka
- [U-Boot] [linux-sunxi] [PATCH] sunxi: fix SID read on H3
Siarhei Siamashka
- [U-Boot] [PATCH v1] dm: spl: mmc: Fix EXT SPL support
Michal Simek
- [U-Boot] [PATCH v3 1/2] dm: Add support for scsi/sata based devices
Michal Simek
- [U-Boot] [PATCH] ARM64: zynqmp: List secondary software boot modes
Michal Simek
- [U-Boot] [PATCH v4 1/2] dm: Add support for scsi/sata based devices
Michal Simek
- [U-Boot] [PATCH v4 2/2] block: Move ceva driver to DM
Michal Simek
- [U-Boot] [GIT PULL] Xilinx and SCSI changes
Michal Simek
- [U-Boot] [GIT PULL] Xilinx and SCSI changes
Michal Simek
- [U-Boot] [PATCH v3 3/4] mmc: zynq: Determine base clock frequency via clock framework
Michal Simek
- [U-Boot] [RFC PATCH] ARM: zynq: Replace dram_init* functions with board_init_f safe ones
Michal Simek
- [U-Boot] [PATCH] tools: mkimage: Use fstat instead of stat to avoid malicious hacks
Michal Simek
- [U-Boot] [GIT PULL] Xilinx and SCSI changes
Michal Simek
- [U-Boot] [GIT PULL] Xilinx and SCSI changes
Michal Simek
- [U-Boot] [GIT PULL] Xilinx and SCSI changes
Michal Simek
- [U-Boot] [PATCH 1/2] common: miiphyutil: Add helper function for mdio bus name
Michal Simek
- [U-Boot] [PATCH 2/2] net: xilinx: Use mdio_register_seq() to support multiple instances
Michal Simek
- [U-Boot] [GIT PULL] Xilinx and SCSI changes
Michal Simek
- [U-Boot] Pull request: u-boot-net.git master
Michal Simek
- [U-Boot] Pull request: u-boot-net.git master
Michal Simek
- [U-Boot] [PATCH] board: topic: Detect RAM size at boot
Michal Simek
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Michal Simek
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Michal Simek
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Michal Simek
- [U-Boot] [PATCH 1/2] lib: Add WATCHDOG_RESET to wait_bit.h
Michal Simek
- [U-Boot] [PATCH 2/2] net: gem: Use wait_for_bit() instead of private mdio_wait()
Michal Simek
- [U-Boot] [PATCH v2 1/2] common: miiphyutil: Add helper function for mdio bus name
Michal Simek
- [U-Boot] [PATCH v2 2/2] net: xilinx: Use mdio_register_seq() to support multiple instances
Michal Simek
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Michal Simek
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Michal Simek
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Michal Simek
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Michal Simek
- [U-Boot] [PATCH v2] ARM: dt: zynq: Add labels to cpu nodes to allow overriding OPPs.
Michal Simek
- [U-Boot] [PATCH] travis-ci: Add zynq_zc702 target support
Michal Simek
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Michal Simek
- [U-Boot] [PATCH] zynq: spi: Honour the activation / deactivation delay
Michal Simek
- [U-Boot] [PATCH] gpio: zynq: Remove empty line
Michal Simek
- [U-Boot] [PATCH] mmc: Extend dependencies for zynq sdhci
Michal Simek
- [U-Boot] [PATCH 0/3] Add generic FDT memory bank decoding and gd initialization
Michal Simek
- [U-Boot] [PATCH] zynq: spi: Honour the activation / deactivation delay
Michal Simek
- [U-Boot] [PATCH] microblaze: Make the board configuration name user definable
Michal Simek
- [U-Boot] [PATCH 1/2] microblaze: Remove hardcoded IP address from config
Michal Simek
- [U-Boot] [PATCH 2/2] microblaze: Enable option to overwrite default variables
Michal Simek
- [U-Boot] [PATCH 1/2] ARM64: zynqmp: Increase environment size to 32K
Michal Simek
- [U-Boot] [PATCH 2/2] ARM64: zynqmp: Add support to save env to FAT
Michal Simek
- [U-Boot] [PATCH] fpga: zynqmp: Remove empty functions
Michal Simek
- [U-Boot] [PATCH] common: Fix logic in fpga programming
Michal Simek
- [U-Boot] [PATCH v2] fpga: zynqmp: Remove empty functions
Michal Simek
- [U-Boot] [PATCH] common: Fix logic in fpga programming
Michal Simek
- [U-Boot] [PATCH v2] common: Fix logic in fpga programming
Michal Simek
- [U-Boot] [PATCH] ARM: zynq: Move CONFIG_SYS_TEXT_BASE to Kconfig
Michal Simek
- [U-Boot] [PATCH 1/2] clk: zynqmp: Add clock driver support for zynqmp
Michal Simek
- [U-Boot] [PATCH 2/2] net: zynq_gem: Use clock driver for ZynqMP
Michal Simek
- [U-Boot] [PATCH 1/4] ARM: zynq: Remove CONFIG_BOOTP_SERVERIP
Michal Simek
- [U-Boot] [PATCH 2/4] ARM: zynq: Remove spi-max-frequency
Michal Simek
- [U-Boot] [PATCH 3/4] ARM: zynq: Setup modeboot variable based on boot mode
Michal Simek
- [U-Boot] [PATCH 4/4] ARM: dts: zynq: replace gpio-key, wakeup with wakeup-source property
Michal Simek
- [U-Boot] [PATCH 1/7] ARM64: zynqmp: Add missing SPL dependency for boot.bin generation
Michal Simek
- [U-Boot] [PATCH 2/7] ARM64: zynqmp: clk: Add the clock for watchdog
Michal Simek
- [U-Boot] [PATCH 3/7] ARM64: zynqmp: Add missing earlycon for ep108
Michal Simek
- [U-Boot] [PATCH 4/7] ARM64: zynqmp: Fix usb nodes for dc1 and dc2
Michal Simek
- [U-Boot] [PATCH 5/7] ARM64: zynqmp: Add idle state for ZynqMP
Michal Simek
- [U-Boot] [PATCH 6/7] ARM64: zynqmp: Add one empty line between license and nodes
Michal Simek
- [U-Boot] [PATCH 7/7] ARM64: zynqmp: Enable fastboot for first SD/MMC/EMMC device
Michal Simek
- [U-Boot] [PATCH 4/4] ARM: dts: zynq: replace gpio-key, wakeup with wakeup-source property
Michal Simek
- [U-Boot] [PATCH v3 3/3] ARM64: zynqmp: Replace board specific with generic memory bank decoding
Michal Simek
- [U-Boot] [PATCH 2/4] ARM: zynq: Remove spi-max-frequency
Michal Simek
- [U-Boot] [GIT PULL] Xilinx fixes
Michal Simek
- [U-Boot] [PATCH] tools: mkimage: Call fclose in error path
Michal Simek
- [U-Boot] [PATCH] tools: mkimage: Call fclose in error path
Michal Simek
- [U-Boot] [PATCH 00/10] driver model bring-up of dwc3 usb peripheral
Michal Simek
- [U-Boot] [PATCH] common: Fix logic in fpga programming
Michal Simek
- [U-Boot] [PATCH] common: Fix logic in fpga programming
Michal Simek
- [U-Boot] [PATCH] usb: storage: Show number of storage devices detected for DM_USB
Michal Simek
- [U-Boot] [PATCH] drivers: usb: Add USB_XHCI_ZYNQMP to Kconfig
Michal Simek
- [U-Boot] [PATCH] usb: storage: Show number of storage devices detected for DM_USB
Michal Simek
- [U-Boot] [PATCH] usb: storage: Show number of storage devices detected for DM_USB
Michal Simek
- [U-Boot] [PATCH] ARM64: zynqmp: Fix i2c node's compatible string
Michal Simek
- [U-Boot] [PATCH 16/17] arm: mvebu: Add gdsys ControlCenter-Compact board
Mario Six
- [U-Boot] [PATCH 07/17] lib: tpm: Add command to flush resources
Mario Six
- [U-Boot] [PATCH 06/17] dm: Add callback to modify the device tree
Mario Six
- [U-Boot] [PATCH 15/17] arm: mvebu: Implement secure boot
Mario Six
- [U-Boot] [PATCH v1] fat: fatwrite: fix the command for FAT12
Philipp Skadorov
- [U-Boot] [PATCH v1] fat: fatwrite: fix the command for FAT12
Philipp Skadorov
- [U-Boot] [PATCH v2] fat: fatwrite: fix the command for FAT12
Philipp Skadorov
- [U-Boot] [RFC PATCH 0/3] sunxi: video: Add support for HDMI output on H3
Jernej Skrabec
- [U-Boot] [RFC PATCH 1/3] sunxi: Add clocks for DE2/HDMI/TCON
Jernej Skrabec
- [U-Boot] [RFC PATCH 2/3] sunxi: video: Add video driver for H3 SoC
Jernej Skrabec
- [U-Boot] [RFC PATCH 3/3] sunxi: Enable H3 video driver in defconfigs
Jernej Skrabec
- [U-Boot] Problem: the build does not recurse into subdirectory
Maxim Sloyko
- [U-Boot] Problem: the build does not recurse into subdirectory
Maxim Sloyko
- [U-Boot] [PATCH v6 1/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 GIC node
Wenbin Song
- [U-Boot] [PATCH] Makefile: Fix linking with modern binutils
Joel Stanley
- [U-Boot] Makefile: Fix linking with modern binutils
Joel Stanley
- [U-Boot] Makefile: Fix linking with modern binutils
Joel Stanley
- [U-Boot] [PATCH v2] Makefile: Fix linking with modern binutils
Joel Stanley
- [U-Boot] Rockchip RK3288 u-boot with mainline kernel
Heiko Stuebner
- [U-Boot] Rockchip RK3288 u-boot with mainline kernel
Heiko Stuebner
- [U-Boot] [PATCH v3 0/9] From Simon:
Heiko Stübner
- [U-Boot] [PATCH 00/11] Convert several macros to Kconfig
York Sun
- [U-Boot] [PATCH 01/11] powerpc: cyrus: Separate P5020/P5040 config options
York Sun
- [U-Boot] [PATCH 02/11] powerpc: mpc85xx: Convert CONFIG_SYS_CCSRBAR_DEFAULT to Kconfig option
York Sun
- [U-Boot] [PATCH 03/11] powerpc: mpc86xx: Convert CONFIG_SYS_CCSRBAR_DEFAULT to Kconfig option
York Sun
- [U-Boot] [PATCH 04/11] script: remove CONFIG_SYS_CCSRBAR_DEFAULT from white list
York Sun
- [U-Boot] [PATCH 05/11] armv7: ls1021a: Move SECURE_BOOT option to Kconfig
York Sun
- [U-Boot] [PATCH 06/11] armv8: fsl-layerscape: Move SECURE_BOOT to Kconfig
York Sun
- [U-Boot] [PATCH 07/11] powerpc: mpc85xx: Move SECURE_BOOT to Kconfig
York Sun
- [U-Boot] [PATCH 08/11] powerpc: mpc85xx: Move CONFIG_FSL_LAW to Kconfig
York Sun
- [U-Boot] [PATCH 09/11] powerpc: mpc86xx: Move CONFIG_FSL_LAW to Kconfig
York Sun
- [U-Boot] [PATCH 10/11] powerpc: mpc85xx: Convert CONFIG_SYS_FSL_NUM_LAWS to Kconfig option
York Sun
- [U-Boot] [PATCH 11/11] powerpc: mpc86xx: Convert CONFIG_SYS_FSL_NUM_LAWS to Kconfig option
York Sun
- [U-Boot] [PATCH 00/24] Lift mpc85xx config options to Kconfig
York Sun
- [U-Boot] [PATCH 01/24] powerpc: E500: Move CONFIG_E500 and CONFIG_E500MC to Kconfig
York Sun
- [U-Boot] [PATCH 02/24] powerpc: mpc85xx: Move CONFIG_SYS_NUM_TLBCAMS to Kconfig
York Sun
- [U-Boot] [PATCH 03/24] powerpc: mpc85xx: Move CONFIG_SYS_PPC_E500_DEBUG_TLB to Kconfig
York Sun
- [U-Boot] [PATCH 04/24] crypto: Move SYS_FSL_SEC_COMPAT into driver Kconfig
York Sun
- [U-Boot] [PATCH 05/24] crypto: Move CONFIG_SYS_FSL_SEC_LE and _BE to Kconfig
York Sun
- [U-Boot] [PATCH 06/24] powerpc: mpc85xx: Remove variant SoCs T1020/T1022/T1013/T1014
York Sun
- [U-Boot] [PATCH 07/24] powerpc: T1023RDB: Remove macro CONFIG_T1023RDB
York Sun
- [U-Boot] [PATCH 08/24] powerpc: T1024RDB: Remove macro CONFIG_T1024RDB
York Sun
- [U-Boot] [PATCH 09/24] powerpc: T1040QDS: Remove macro CONFIG_T1040QDS
York Sun
- [U-Boot] [PATCH 10/24] powerpc: T2080QDS: Remove macro T2080QDS
York Sun
- [U-Boot] [PATCH 11/24] powerpc: T2080RDB: Remove macro CONFIG_T2080RDB
York Sun
- [U-Boot] [PATCH 12/24] powerpc: T2081QDS: Remove macro T2081QDS
York Sun
- [U-Boot] [PATCH 13/24] powerpc: T104xQDS: Remove macro CONFIG_T104xD4QDS
York Sun
- [U-Boot] [PATCH 14/24] fsl_ddr: Move DDR config options to driver Kconfig
York Sun
- [U-Boot] [PATCH 15/24] arm: layerscape: Move CONFIG_SYS_FSL_ERRATUM_* to Kconfig
York Sun
- [U-Boot] [PATCH 16/24] mmc: move CONFIG_SYS_FSL_ERRATUM_ESDHC* to Kconfig
York Sun
- [U-Boot] [PATCH 17/24] powerpc: mpc85xx: Move CONFIG_SYS_FSL_ERRATUM_* to Kconfig
York Sun
- [U-Boot] [PATCH 18/24] ddr: fsl: Move macro CONFIG_NUM_DDR_CONTROLLERS to Kconfig
York Sun
- [U-Boot] [PATCH 19/24] ddr: fsl: Merge macro CONFIG_NUM_DDR_CONTROLLERS and CONFIG_SYS_NUM_DDR_CTRLS
York Sun
- [U-Boot] [PATCH 20/24] ddr: fsl: Move CONFIG_SYS_FSL_DDR_VER to Kconfig
York Sun
- [U-Boot] [PATCH 21/24] powerpc: mpc85xx: Remove unused ifdef in config header
York Sun
- [U-Boot] [PATCH 22/24] powerpc: E6500: Move macro CONFIG_E6500 to Kconfig
York Sun
- [U-Boot] [PATCH 23/24] powerpc: mpc85xx: Move CONFIG_SYS_FSL_QORIQ_CHASSIS* to Kconfig
York Sun
- [U-Boot] [PATCH 24/24] powerpc: mpc85xx: Move macro CONFIG_SYS_PPC64 to Kconfig
York Sun
- [U-Boot] [PATCH v3] spi: Add error checking for invalid bus widths
Jagan Teki
- [U-Boot] [PATCH] spi: Zap mpc52xx_spi.c and config
Jagan Teki
- [U-Boot] [PATCH] MAINTAINERS: Fix ALTERA SOCFPGA Files
Jagan Teki
- [U-Boot] [PATCH] MAINTAINERS: Fix ALTERA SOCFPGA Files
Jagan Teki
- [U-Boot] [PATCH v2 1/7] video: Kconfig: Add VIDEO_IPV3 entry
Jagan Teki
- [U-Boot] [PATCH v3 01/11] spi: cadence_qspi: Fix clearing of pol/pha bits
Jagan Teki
- [U-Boot] [PATCH v3 02/11] spi: cadence_qspi: Fix baud rate calculation
Jagan Teki
- [U-Boot] [PATCH v3 03/11] spi: cadence_qspi: Better debug information on the SPI clock rate
Jagan Teki
- [U-Boot] [PATCH v3 04/11] spi: cadence_qspi: Use #define for bits instead of bit shifts
Jagan Teki
- [U-Boot] [PATCH v3 05/11] spi: cadence_qspi: Clean up the #define names
Jagan Teki
- [U-Boot] [PATCH v3 06/11] spi: cadence_qspi: Use spi mode at the point it is needed
Jagan Teki
- [U-Boot] [PATCH v3 07/11] spi: cadence_qspi: Remove returns from end of void functions
Jagan Teki
- [U-Boot] [PATCH v3 09/11] spi: cadence_qspi: Move DT prop code to match layout
Jagan Teki
- [U-Boot] [PATCH v3 10/11] spi: cadence_qspi: Change readdata_capture() arg to bool
Jagan Teki
- [U-Boot] [PATCH v3 11/11] spi: cadence_qspi: Support specifying the sample edge used
Jagan Teki
- [U-Boot] [PATCH v2 13/14] sunxi: Sync GR8 DTS and AXP209 with the kernel
Jagan Teki
- [U-Boot] [PATCH v2 0/14] sunxi: Add support for the CHIP Pro
Jagan Teki
- [U-Boot] Query on qspi driver
Jagan Teki
- [U-Boot] [PATCH v3 11/11] spi: cadence_qspi: Support specifying the sample edge used
Jagan Teki
- [U-Boot] [PATCH v3 10/11] spi: cadence_qspi: Change readdata_capture() arg to bool
Jagan Teki
- [U-Boot] [PATCH v3 11/11] spi: cadence_qspi: Support specifying the sample edge used
Jagan Teki
- [U-Boot] [PATCH v2 0/14] sunxi: Add support for the CHIP Pro
Jagan Teki
- [U-Boot] [PATCH v3 00/13] imx6: icorem6: Add dm-eth, framebuffer and I2C support
Jagan Teki
- [U-Boot] [PATCH v3 01/13] net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddr
Jagan Teki
- [U-Boot] [PATCH v3 02/13] net: fec_mxc: Convert into driver model
Jagan Teki
- [U-Boot] [PATCH v3 03/13] net: fec_mxc: Driver cleanups
Jagan Teki
- [U-Boot] [PATCH v3 04/13] dm: net: fec: Add .read_rom_hwaddr
Jagan Teki
- [U-Boot] [PATCH v3 05/13] ARM: dts: imx6qdl-icore: Add FEC support
Jagan Teki
- [U-Boot] [PATCH v3 06/13] icorem6: Use CONFIG_DM_ETH support
Jagan Teki
- [U-Boot] [PATCH v3 07/13] video: Kconfig: Add VIDEO_IPV3 entry
Jagan Teki
- [U-Boot] [PATCH v3 08/13] imx6: icorem6: Add framebuffer support
Jagan Teki
- [U-Boot] [PATCH v3 09/13] imx6: icorem6: Add custom splashscreen support
Jagan Teki
- [U-Boot] [PATCH v3 10/13] i2c: Kconfig: Add SYS_I2C_MXC entry
Jagan Teki
- [U-Boot] [PATCH v3 11/13] i2c: mxc: Print hex instead of decimal for bus address
Jagan Teki
- [U-Boot] [PATCH v3 12/13] i2c: mxc: Make 'no gpio pinctrl state' print as debug
Jagan Teki
- [U-Boot] [PATCH v3 13/13] imx6: icorem6: Add I2C support
Jagan Teki
- [U-Boot] [PATCH v2 1/7] video: Kconfig: Add VIDEO_IPV3 entry
Jagan Teki
- [U-Boot] [PATCH v3 10/13] i2c: Kconfig: Add SYS_I2C_MXC entry
Jagan Teki
- [U-Boot] [PATCH v3 10/13] i2c: Kconfig: Add SYS_I2C_MXC entry
Jagan Teki
- [U-Boot] [PATCH v3 11/11] spi: cadence_qspi: Support specifying the sample edge used
Jagan Teki
- [U-Boot] [PATCH v3 13/13] imx6: icorem6: Add I2C support
Jagan Teki
- [U-Boot] [PATCH v3 00/11] SF: Cadence QSPI driver fixes and clean up
Jagan Teki
- [U-Boot] [PATCH v3] spi: Add error checking for invalid bus widths
Jagan Teki
- [U-Boot] [PATCH] mtd: spi: don't return -1 when scan succeed
Jagan Teki
- [U-Boot] [PATCH v2 0/14] sunxi: Add support for the CHIP Pro
Jagan Teki
- [U-Boot] [PATCH v3 00/13] imx6: icorem6: Add dm-eth, framebuffer and I2C support
Jagan Teki
- [U-Boot] [PATCH v3 02/13] net: fec_mxc: Convert into driver model
Jagan Teki
- [U-Boot] [PATCH v3 00/13] imx6: icorem6: Add dm-eth, framebuffer and I2C support
Jagan Teki
- [U-Boot] [PATCH v4 00/16] imx6: Add Engicam GEAM6UL/i.CoreM6 RQS board support
Jagan Teki
- [U-Boot] [PATCH v4 01/16] arm: dts: Add devicetree for i.MX6UL
Jagan Teki
- [U-Boot] [PATCH v4 02/16] arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial support
Jagan Teki
- [U-Boot] [PATCH v4 03/16] arm: dts: imx6ul-geam: Add I2C nodes
Jagan Teki
- [U-Boot] [PATCH v4 04/16] imx6: geam6ul: Add I2C support
Jagan Teki
- [U-Boot] [PATCH v4 05/16] imx6: geam6ul: Add NAND support
Jagan Teki
- [U-Boot] [PATCH v4 06/16] imx6: geam6ul: Enable MTD device support
Jagan Teki
- [U-Boot] [PATCH v4 07/16] imx6: geam6ul: Add default mtd nand partition table
Jagan Teki
- [U-Boot] [PATCH v4 08/16] arm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter Kit initial support
Jagan Teki
- [U-Boot] [PATCH v4 09/16] arm: imx6q: Add Engicam i.CoreM6 Solo/Duallite RQS Starter Kit initial support
Jagan Teki
- [U-Boot] [PATCH v4 10/16] imx6: icorem6: Rename engicam icorem6 defconfig files
Jagan Teki
- [U-Boot] [PATCH v4 11/16] arm: dts: imx6qdl-icore-rqs: Add I2C node's
Jagan Teki
- [U-Boot] [PATCH v4 12/16] imx6: icorem6_rqs: Add I2C support
Jagan Teki
- [U-Boot] [PATCH v4 13/16] arm: dts: imx6ul-geam: Add FEC node
Jagan Teki
- [U-Boot] [PATCH v4 14/16] imx6: geam6ul: Add FEC support
Jagan Teki
- [U-Boot] [PATCH v4 15/16] arm: dts: imx6qdl-icore-rqs: Add FEC node
Jagan Teki
- [U-Boot] [PATCH v4 16/16] imx6: icorem6_rqs: Add FEC support
Jagan Teki
- [U-Boot] [PATCH] sf: Do not force the DT memory map size to exactly match the device
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH] sunxi: enable H3 EMAC for the nanopi neo
Jagan Teki
- [U-Boot] Pull request v2: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH] spi: Zap mpc52xx_spi.c, config and related code
Jagan Teki
- [U-Boot] Problem with qspi when using micron devices
Jagan Teki
- [U-Boot] [PATCH v2] Revert "sf: Fix quad bit set for micron devices"
Jagan Teki
- [U-Boot] Build failure in spi repo
Jagan Teki
- [U-Boot] Pull request v2: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH v4 00/16] imx6: Add Engicam GEAM6UL/i.CoreM6 RQS board support
Jagan Teki
- [U-Boot] [PATCH 1/2] sunxi: add proper device tree for Orange Pi Zero boards
Jagan Teki
- [U-Boot] [PATCH 2/2] sunxi: add orangepi zero defconfig
Jagan Teki
- [U-Boot] [PATCH v4 00/16] imx6: Add Engicam GEAM6UL/i.CoreM6 RQS board support
Jagan Teki
- [U-Boot] [PATCH v4 00/16] imx6: Add Engicam GEAM6UL/i.CoreM6 RQS board support
Jagan Teki
- [U-Boot] [PATCH v5 10/16] imx6: icorem6: Rename engicam icorem6 defconfig files
Jagan Teki
- [U-Boot] [PATCH v4 00/16] imx6: Add Engicam GEAM6UL/i.CoreM6 RQS board support
Jagan Teki
- [U-Boot] Pull request v2: u-boot-spi/master
Jagan Teki
- [U-Boot] Pull request v2: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH v2] Revert "sf: Fix quad bit set for micron devices"
Jagan Teki
- [U-Boot] [PATCH 1/2] sunxi: add proper device tree for Orange Pi Zero boards
Jagan Teki
- [U-Boot] Cubieboard2 uboot 2016.09.01 not supporting booting from sata
Jagan Teki
- [U-Boot] [PATCH 2/2] sunxi: add orangepi zero defconfig
Jagan Teki
- [U-Boot] [PATCH 1/2] sunxi: add proper device tree for Orange Pi Zero boards
Jagan Teki
- [U-Boot] Cubieboard2 uboot 2016.09.01 not supporting booting from sata
Jagan Teki
- [U-Boot] [PATCH] sunxi: fix SID read on H3
Jagan Teki
- [U-Boot] FIT Image Crashing
Jagan Teki
- [U-Boot] [PATCH 00/10] i.MX6: engicam: Add nandboot env and FIT support
Jagan Teki
- [U-Boot] [PATCH 01/10] configs: engicam: Increase nand kernel partition size
Jagan Teki
- [U-Boot] [PATCH 02/10] imx6: engicam: Use bootm instead of bootz
Jagan Teki
- [U-Boot] [PATCH 03/10] configs: engicam: Rename nand with gpmi-name in mtdparts
Jagan Teki
- [U-Boot] [PATCH 04/10] defconfigs: engicam: Enable MMC commands in nand
Jagan Teki
- [U-Boot] [PATCH 05/10] defconfigs: engicam: Enable UBI commands
Jagan Teki
- [U-Boot] [PATCH 06/10] imx6: engicam: Add nandboot env support
Jagan Teki
- [U-Boot] [PATCH 07/10] defconfigs: imx6: engicam: Enable FIT
Jagan Teki
- [U-Boot] [PATCH 08/10] configs: engicam: Enable CONFIG_IMAGE_FORMAT_LEGACY
Jagan Teki
- [U-Boot] [PATCH 09/10] configs: engicam: Cleanup on mmcboot env
Jagan Teki
- [U-Boot] [PATCH 10/10] configs: engicam: Add fitboot env support
Jagan Teki
- [U-Boot] [PATCH] imx6ul: geam6ul: Add MAINTAINERS for nand_defconfig
Jagan Teki
- [U-Boot] [PATCH] sf: ids: Correct Micron n25q128 flags
Jagan Teki
- [U-Boot] [PATCH] spi: Zap armada100_spi.c and env
Jagan Teki
- [U-Boot] [PATCH] sf: ids: Correct Micron n25q128 flags
Jagan Teki
- [U-Boot] [PATCH] zynq: spi: Honour the activation / deactivation delay
Jagan Teki
- [U-Boot] [PATCH 3/3] imx: mx6sllevk: add usb support
Jagan Teki
- [U-Boot] [PATCH] imx6ul: geam6ul: Enable I2C support
Jagan Teki
- [U-Boot] Pull request: u-boot-sunxi/master
Jagan Teki
- [U-Boot] [PATCH] spi: Zap armada100_spi.c and env
Jagan Teki
- [U-Boot] [PATCH] spi: Zap mpc52xx_spi.c, config and related code
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH 00/10] i.MX6: engicam: Add nandboot env and FIT support
Jagan Teki
- [U-Boot] [PATCH v1] fat: fatwrite: fix the command for FAT12
Benoît Thébaudeau
- [U-Boot] [PATCH v1] fat: fatwrite: fix the command for FAT12
Benoît Thébaudeau
- [U-Boot] [PATCH 1/2] fs/fat: Avoid corruption of sectors following the FAT
Benoît Thébaudeau
- [U-Boot] [PATCH 2/2] fs/fat: merge readwrite get_fatent_value() with readonly get_fatent()
Benoît Thébaudeau
- [U-Boot] [PATCH v2 14/23] sunxi: H3: add DRAM controller single bit delay support
Chen-Yu Tsai
- [U-Boot] [PATCH v2 23/23] sunxi: A64: add 32-bit SPL support
Chen-Yu Tsai
- [U-Boot] [RFC PATCH 2/3] sunxi: video: Add video driver for H3 SoC
Chen-Yu Tsai
- [U-Boot] [RFC PATCH 1/3] sunxi: Add clocks for DE2/HDMI/TCON
Chen-Yu Tsai
- [U-Boot] [linux-sunxi] Re: [RFC PATCH 0/3] sunxi: video: Add support for HDMI output on H3
Chen-Yu Tsai
- [U-Boot] [linux-sunxi] Re: Problems to Allwinner H3's eFUSE/SID
Chen-Yu Tsai
- [U-Boot] Linux 4.9 on cortex-M4 STM32F429-disc1
Steven VALSESIA
- [U-Boot] Linux 4.9 on cortex-M4 STM32F429-disc1
Steven VALSESIA
- [U-Boot] [linux-sunxi] Re: [RFC PATCH 0/3] sunxi: video: Add support for HDMI output on H3
Emmanuel Vadot
- [U-Boot] [PATCH v2] api: Use hashtable function for API_env_enum
Emmanuel Vadot
- [U-Boot] [PATCH] tools: binman: Use /usr/bin/env to find python executable
Emmanuel Vadot
- [U-Boot] [U-Boot,v6,11/13] sunxi: Use binman for sunxi boards
Emmanuel Vadot
- [U-Boot] [U-Boot,v6,11/13] sunxi: Use binman for sunxi boards
Emmanuel Vadot
- [U-Boot] [PATCH] example: api: ARM example needs memset
Emmanuel Vadot
- [U-Boot] uefi: x86: uboot as uefi payload
Markus Valentin
- [U-Boot] uefi: x86: uboot as uefi payload
Markus Valentin
- [U-Boot] net: e1000: support for intel 82579
Markus Valentin
- [U-Boot] [PATCH 01/13] serial: 16550: Add getfcr accessor
Marek Vasut
- [U-Boot] [PATCH 02/13] serial: 16550: Add port type as driver data
Marek Vasut
- [U-Boot] [PATCH 03/13] serial: 16550: Add Ingenic JZ4780 support
Marek Vasut
- [U-Boot] [PATCH 04/13] mmc: Fix warning if debug() is not used
Marek Vasut
- [U-Boot] [PATCH 05/13] mmc: Tinification of the mmc code
Marek Vasut
- [U-Boot] [PATCH 06/13] mmc: Add JZ47xx SD/MMC controller driver
Marek Vasut
- [U-Boot] [PATCH 07/13] SPL: mmc: Make spl_mmc_load_image available
Marek Vasut
- [U-Boot] [PATCH 08/13] gpio: Add JZ47xx GPIO driver
Marek Vasut
- [U-Boot] [PATCH 09/13] misc: Add JZ47xx efuse driver
Marek Vasut
- [U-Boot] [PATCH 10/13] mips: Add SPL header
Marek Vasut
- [U-Boot] [PATCH 11/13] mips: jz47xx: Add JZ4780 SoC support
Marek Vasut
- [U-Boot] [PATCH 12/13] mips: jz47xx: Add minimal JZ MMC node
Marek Vasut
- [U-Boot] [PATCH 13/13] mips: jz47xx: Add Creator CI20 platform
Marek Vasut
- [U-Boot] [PATCH 02/14] spl: mmc: Fix build without LIBCOMMON_SUPPORT
Marek Vasut
- [U-Boot] [PATCH] MAINTAINERS: Fix ALTERA SOCFPGA Files
Marek Vasut
- [U-Boot] [PATCH] MAINTAINERS: Fix ALTERA SOCFPGA Files
Marek Vasut
- [U-Boot] [PATCH resend v3 1/6] drivers: usb: gadget: ether: adopt to usb driver model
Marek Vasut
- [U-Boot] [PATCH v3] usb: dwc2: add support for external vbus supply
Marek Vasut
- [U-Boot] [PATCH resend v3 1/6] drivers: usb: gadget: ether: adopt to usb driver model
Marek Vasut
- [U-Boot] [PATCH v3] usb: dwc2: add support for external vbus supply
Marek Vasut
- [U-Boot] [PATCH v3 10/11] spi: cadence_qspi: Change readdata_capture() arg to bool
Marek Vasut
- [U-Boot] [PATCH v3 11/11] spi: cadence_qspi: Support specifying the sample edge used
Marek Vasut
- [U-Boot] [PULL] u-boot-socfpga/master
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH v3 11/11] spi: cadence_qspi: Support specifying the sample edge used
Marek Vasut
- [U-Boot] [PATCH 01/10] ARM:dts: Added device tree for socfpga arria10 development kit sdmmc
Marek Vasut
- [U-Boot] [PATCH 02/10] arm: socfpga: arria10: Added config option build for SPL
Marek Vasut
- [U-Boot] [PATCH 03/10] arm: socfpga: arria10: Enhanced socfpga_arria10_defconfig to support SPL
Marek Vasut
- [U-Boot] [PATCH 04/10] arm: socfpga: arria10: Added clock manager and pin mux compat macro
Marek Vasut
- [U-Boot] [PATCH 05/10] arm: socfpga: arria10: Added support for Arria 10 SoC dev kit
Marek Vasut
- [U-Boot] [PATCH 06/10] arm: socfpga: arria10: Added drivers for Arria10 Reset Manager
Marek Vasut
- [U-Boot] [PATCH 07/10] arm: socfpga: arria10: Added miscellaneous drivers for Arria10
Marek Vasut
- [U-Boot] [PATCH 01/10] ARM:dts: Added device tree for socfpga arria10 development kit sdmmc
Marek Vasut
- [U-Boot] [PATCH 04/10] arm: socfpga: arria10: Added clock manager and pin mux compat macro
Marek Vasut
- [U-Boot] [PATCH 02/10] arm: socfpga: arria10: Added config option build for SPL
Marek Vasut
- [U-Boot] [PATCH 05/10] arm: socfpga: arria10: Added support for Arria 10 SoC dev kit
Marek Vasut
- [U-Boot] [PATCH 06/10] arm: socfpga: arria10: Added drivers for Arria10 Reset Manager
Marek Vasut
- [U-Boot] [PATCH 07/10] arm: socfpga: arria10: Added miscellaneous drivers for Arria10
Marek Vasut
- [U-Boot] [PATCH] usb: gadget: dfu: add functional descriptor in descriptor set
Marek Vasut
- [U-Boot] [PATCH 06/10] arm: socfpga: arria10: Added drivers for Arria10 Reset Manager
Marek Vasut
- [U-Boot] [PATCH 05/10] arm: socfpga: arria10: Added support for Arria 10 SoC dev kit
Marek Vasut
- [U-Boot] [PATCH 02/10] arm: socfpga: arria10: Added config option build for SPL
Marek Vasut
- [U-Boot] [PATCH] usb: dwc2-otg: remove unused variable
Marek Vasut
- [U-Boot] [PATCH] usb: dwc2_udc_otg: remove the driver_desc as unused variable
Marek Vasut
- [U-Boot] Problem with qspi when using micron devices
Marek Vasut
- [U-Boot] Many unused variable warnings
Marek Vasut
- [U-Boot] [PATCH] ARM: mxs: Remove unused variable warning
Marek Vasut
- [U-Boot] [PATCH] tools: mxsimage: Fix build with OpenSSL 1.1.x
Marek Vasut
- [U-Boot] [PATCH 06/10] arm: socfpga: arria10: Added drivers for Arria10 Reset Manager
Marek Vasut
- [U-Boot] [PATCH 10/10] arm: socfpga: arria10: Added Arria10 critical HW initialization to spl
Marek Vasut
- [U-Boot] [PATCH 04/10] arm: socfpga: arria10: Added clock manager and pin mux compat macro
Marek Vasut
- [U-Boot] [PATCH 02/10] arm: socfpga: arria10: Added config option build for SPL
Marek Vasut
- [U-Boot] [PATCH 04/10] arm: socfpga: arria10: Added clock manager and pin mux compat macro
Marek Vasut
- [U-Boot] [PATCH 02/10] arm: socfpga: arria10: Added config option build for SPL
Marek Vasut
- [U-Boot] [PATCH 06/10] arm: socfpga: arria10: Added drivers for Arria10 Reset Manager
Marek Vasut
- [U-Boot] [PATCH 04/10] arm: socfpga: arria10: Added clock manager and pin mux compat macro
Marek Vasut
- [U-Boot] [PATCH 02/10] arm: socfpga: arria10: Added config option build for SPL
Marek Vasut
- [U-Boot] [PATCH 04/10] arm: socfpga: arria10: Added clock manager and pin mux compat macro
Marek Vasut
- [U-Boot] [PATCH V2] tools: mxsimage: Fix build with OpenSSL 1.1.x
Marek Vasut
- [U-Boot] [PATCH] drivers: usb: Add USB_XHCI_ZYNQMP to Kconfig
Marek Vasut
- [U-Boot] [PATCH 1/3] usb: ehci-mx6: implement ofdata_to_platdata
Marek Vasut
- [U-Boot] [PATCH 3/3] imx: mx6sllevk: add usb support
Marek Vasut
- [U-Boot] [PATCH] usb: storage: Show number of storage devices detected for DM_USB
Marek Vasut
- [U-Boot] [PATCH 3/3] imx: mx6sllevk: add usb support
Marek Vasut
- [U-Boot] [PATCH 3/3] imx: mx6sllevk: add usb support
Marek Vasut
- [U-Boot] [PATCH 3/3] imx: mx6sllevk: add usb support
Marek Vasut
- [U-Boot] [PATCH 3/3] imx: mx6sllevk: add usb support
Marek Vasut
- [U-Boot] [PATCH 3/3] imx: mx6sllevk: add usb support
Marek Vasut
- [U-Boot] [PATCH V2 1/3] usb: ehci-mx6: implement ofdata_to_platdata
Marek Vasut
- [U-Boot] [PATCH V2 2/3] usb: ehci-mx6: handle vbus-supply
Marek Vasut
- [U-Boot] [PATCH] Move CONFIG_MXC_UART macro
Marek Vasut
- [U-Boot] [PATCH] drivers: usb: Add USB_XHCI_ZYNQMP to Kconfig
Marek Vasut
- [U-Boot] [PATCH V2 1/3] usb: ehci-mx6: implement ofdata_to_platdata
Marek Vasut
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Marek Vasut
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Marek Vasut
- [U-Boot] [PATCH v2 21/30] arm: socfpga: arria10: Enhanced socfpga_arria10_defconfig to support SPL
Marek Vasut
- [U-Boot] [PATCH v2 21/30] arm: socfpga: arria10: Enhanced socfpga_arria10_defconfig to support SPL
Marek Vasut
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Marek Vasut
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Marek Vasut
- [U-Boot] [U-Boot, 1/9] ARM: dts: am57xx: sync DT with latest Linux
Lokesh Vutla
- [U-Boot] [RFC PATCH 0/3] spl: Add D-cache support
Lokesh Vutla
- [U-Boot] [RFC PATCH 0/3] spl: Add D-cache support
Lokesh Vutla
- [U-Boot] [PATCH] sunxi: enable H3 EMAC for the nanopi neo
Jelle van der Waa
- [U-Boot] [PATCH] sunxi: move CONFIG_SATAPWR to Kconfig option
Jelle van der Waa
- [U-Boot] qemu and u-boot-console and other ports?
Stephen Warren
- [U-Boot] [PATCH v5 10/13] tegra: Use a U-Boot-specific .dtsi file
Stephen Warren
- [U-Boot] qemu and u-boot-console and other ports?
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: allow passing cboot DTB to the kernel
Stephen Warren
- [U-Boot] qemu and u-boot-console and other ports?
Stephen Warren
- [U-Boot] [PATCH v2 1/2] test/py: Allow to pass u_boot_log instead of console for run_and_log
Stephen Warren
- [U-Boot] [PATCH v3 1/2] test/py: Pass u_boot_log instead of console for run_and_log
Stephen Warren
- [U-Boot] [PATCH v2 2/2] test/py: Create tests for ext4 and fat testing on sandbox
Stephen Warren
- [U-Boot] Build failure in spi repo
Stephen Warren
- [U-Boot] Build failure in spi repo
Stephen Warren
- [U-Boot] [PATCH v2 1/5] arm: tegra: initial support for apalis tk1
Tom Warren
- [U-Boot] [PATCH v2 1/5] arm: tegra: initial support for apalis tk1
Tom Warren
- [U-Boot] [PATCH 0/6] mmc: move some config options to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH 1/6] Sync defconfig files by savedefconfig
Masahiro Yamada
- [U-Boot] [PATCH 2/6] mmc: complete the unfinished move of CONFIG_MMC
Masahiro Yamada
- [U-Boot] [PATCH 3/6] mmc: make MMC driver entries dependent on MMC
Masahiro Yamada
- [U-Boot] [PATCH 4/6] mmc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCI
Masahiro Yamada
- [U-Boot] [PATCH 5/6] mmc: move some SDHCI related options to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH 6/6] mmc: move MMC_SDHCI_IO_ACCESSORS to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH 0/4] ARM: uniphier: UniPhier updates for v2016.11-rc1
Masahiro Yamada
- [U-Boot] [PATCH 1/4] ARM: uniphier: remove unneeded initializer
Masahiro Yamada
- [U-Boot] [PATCH 2/4] ARM: uniphier: remove unneeded parentheses
Masahiro Yamada
- [U-Boot] [PATCH 3/4] ARM: uniphier: disable CONFIG_ARCH_FIXUP_FDT_MEMORY
Masahiro Yamada
- [U-Boot] [PATCH 4/4] ARM: dts: uniphier: sync Device Tree with Linux
Masahiro Yamada
- [U-Boot] [PATCH 2/6] mmc: complete the unfinished move of CONFIG_MMC
Masahiro Yamada
- [U-Boot] [PATCH 2/6] mmc: complete the unfinished move of CONFIG_MMC
Masahiro Yamada
- [U-Boot] [PATCH 5/6] mmc: move some SDHCI related options to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v2 0/6] mmc: move some config options to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v2 1/6] Sync defconfig files by savedefconfig
Masahiro Yamada
- [U-Boot] [PATCH v2 2/6] mmc: complete unfinished move of CONFIG_MMC
Masahiro Yamada
- [U-Boot] [PATCH v2 3/6] mmc: make MMC driver entries dependent on MMC
Masahiro Yamada
- [U-Boot] [PATCH v2 4/6] mmc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCI
Masahiro Yamada
- [U-Boot] [PATCH v2 5/6] mmc: move some SDHCI related options to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v2 6/6] mmc: move MMC_SDHCI_IO_ACCESSORS to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v2 0/6] mmc: move some config options to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH] mmc: sdhci-cadence: add Cadence SD4HC support
Masahiro Yamada
- [U-Boot] [PATCH v2 2/6] mmc: complete unfinished move of CONFIG_MMC
Masahiro Yamada
- [U-Boot] [PATCH] ARM: uniphier: remove BLK select
Masahiro Yamada
- [U-Boot] [PATCH 0/4] ARM: uniphier: UniPhier updates for v2016.11-rc1
Masahiro Yamada
- [U-Boot] [PATCH] ARM: uniphier: remove BLK select
Masahiro Yamada
- [U-Boot] pull request: u-boot-uniphier/master
Masahiro Yamada
- [U-Boot] [PATCH] mmc: sdhci-cadence: add Cadence SD4HC support
Masahiro Yamada
- [U-Boot] [PATCH] usb: dwc2-otg: remove unused variable
Masahiro Yamada
- [U-Boot] Many unused variable warnings
Masahiro Yamada
- [U-Boot] [PATCH 1/2] armv8: Enable CPUECTLR.SMPEN for coherency
Masahiro Yamada
- [U-Boot] [PATCH v2 03/63] spl: Makefile: Define SPL_ earlier
Masahiro Yamada
- [U-Boot] [PATCH 0/3] ARM: fix the Kconfig misconversion of CONFIG_USE_ARCH_MEMCPY/MEMSET
Masahiro Yamada
- [U-Boot] [PATCH 1/3] ARM: revive CONFIG_USE_ARCH_MEMCPY/MEMSET for UniPhier and Tegra
Masahiro Yamada
- [U-Boot] [PATCH 2/3] common/init: remove meaningless defined(CONFIG_USE_ARCH_MEMSET)
Masahiro Yamada
- [U-Boot] [PATCH 3/3] README: remove description about CONFIG_USE_ARCH_MEMCPY/SET
Masahiro Yamada
- [U-Boot] [PATCH 2/3] common/init: remove meaningless defined(CONFIG_USE_ARCH_MEMSET)
Masahiro Yamada
- [U-Boot] [PATCH 1/3] ARM: revive CONFIG_USE_ARCH_MEMCPY/MEMSET for UniPhier and Tegra
Masahiro Yamada
- [U-Boot] [PATCH v2 0/6] mmc: move some config options to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH 0/5] Introduce basic headers for time, typecheck, iopoll
Masahiro Yamada
- [U-Boot] [PATCH 1/5] delay: collect {m, n, u}delay declarations to include/linux/delay.h
Masahiro Yamada
- [U-Boot] [PATCH 2/5] time: move timer APIs to include/time.h
Masahiro Yamada
- [U-Boot] [PATCH 3/5] typecheck: import include/linux/typecheck.h from Linux 4.9
Masahiro Yamada
- [U-Boot] [PATCH 4/5] time: import time_after, time_before and friends from Linux
Masahiro Yamada
- [U-Boot] [PATCH 5/5] iopoll: import include/linux/iopoll.h from Linux 4.9
Masahiro Yamada
- [U-Boot] [PATCH v2 0/6] mmc: move some config options to Kconfig
Masahiro Yamada
- [U-Boot] [PATCH v2 0/5] Introduce basic headers for time, typecheck, iopoll
Masahiro Yamada
- [U-Boot] [PATCH v2 1/5] delay: collect {m, n, u}delay declarations to include/linux/delay.h
Masahiro Yamada
- [U-Boot] [PATCH v2 2/5] time: move timer APIs to include/time.h
Masahiro Yamada
- [U-Boot] [PATCH v2 3/5] typecheck: import include/linux/typecheck.h from Linux 4.9
Masahiro Yamada
- [U-Boot] [PATCH v2 4/5] time: import time_after, time_before and friends from Linux
Masahiro Yamada
- [U-Boot] [PATCH v2 5/5] iopoll: import include/linux/iopoll.h from Linux 4.9
Masahiro Yamada
- [U-Boot] [PATCH v2] mmc: sdhci-cadence: add Cadence SD4HC support
Masahiro Yamada
- [U-Boot] [PATCH] mmc: uniphier-sd: fix Kconfig dependency
Masahiro Yamada
- [U-Boot] [PATCH v2] miniarm-rk3288: set isp/vop qos priority level
Kever Yang
- [U-Boot] [PATCH 2/7] ext4: determine group descriptor size for 64bit feature
Kever Yang
- [U-Boot] [PATCH] fs/ext4: Initialize group descriptor size for revision level 0 filesystems
Kever Yang
- [U-Boot] [PATCH v2] mmc: rockchip_sdhci: add clock init for mmc
Kever Yang
- [U-Boot] [RESEND PATCH v2] mmc: rockchip_sdhci: add clock init for mmc
Kever Yang
- [U-Boot] [RESEND PATCH v2] mmc: rockchip_sdhci: add clock init for mmc
Kever Yang
- [U-Boot] [RESEND PATCH v2] mmc: rockchip_sdhci: add clock init for mmc
Kever Yang
- [U-Boot] [RESEND PATCH v3 1/2] mmc: rockchip_sdhci: add clock init for mmc
Kever Yang
- [U-Boot] [RESEND PATCH v3 2/2] dts: arm64: rk3399: add max-frequency for sdhci
Kever Yang
- [U-Boot] [PATCH] arm64: rk3399: update rockchip_get_cru API
Kever Yang
- [U-Boot] [RESEND PATCH v3 1/2] mmc: rockchip_sdhci: add clock init for mmc
Kever Yang
- [U-Boot] [RFC PATCH 0/3] arm64: rk3399: enable SPL with ATF support
Kever Yang
- [U-Boot] [RFC PATCH 1/3] arm64: rk3399: add SPL support
Kever Yang
- [U-Boot] [RFC PATCH 2/3] arm64: rk3399: add ddr controller driver
Kever Yang
- [U-Boot] [RFC PATCH 3/3] spl: add support to booting with ATF
Kever Yang
- [U-Boot] [PATCH 00/11] mmc: clean the sdhci host controller
Kever Yang
- [U-Boot] [PATCH] miniarm-rk3288: set isp/vop qos priority level
Nickey Yang
- [U-Boot] [PATCH] miniarm-rk3288: set isp/vop qos priority level
Nickey Yang
- [U-Boot] [PATCH v2] miniarm-rk3288: set isp/vop qos priority level
Nickey Yang
- [U-Boot] [PATCH v3] rockchip: rk3288: set isp/vop qos priority level
Nickey Yang
- [U-Boot] [PATCH v4] rockchip: rk3288: set isp/vop qos priority level
Nickey Yang
- [U-Boot] [PATCH] rockchip: video: fix mpixelclock in rockchip HDMI
Nickey Yang
- [U-Boot] [PATCH v3] armv8: QSPI: Add AHB bus 16MB+ size support
Yuan Yao
- [U-Boot] [PATCH v3] rtc: Add RTC chip pcf2127 support
Meng Yi
- [U-Boot] [PATCH] armv8: fsl-lsch2: enable snoopable usb read and write
Stuart Yoder
- [U-Boot] [PATCH v2] armv8: QSPI: Add AHB bus 16MB+ size support
Yao Yuan
- [U-Boot] sf: Remove spansion_s25fss_disable_4KB_erase
Yao Yuan
- [U-Boot] [PATCH v3] timer: Support clocks via phandle
Vlad Zakharov
- [U-Boot] [PATCH v3] timer: Support clocks via phandle
Vlad Zakharov
- [U-Boot] Accessing nested device tree nodes via phandle
Vlad Zakharov
- [U-Boot] [PATCH v4 3/6] ARMv8: Add secure sections for PSCI text and data
Hongbo Zhang
- [U-Boot] [PATCH v5 0/6] Add ARMv8 PSCI framework
Hongbo Zhang
- [U-Boot] [PATCH v5 1/6] ARMv8: LS1043A: change macro CONFIG_ARMV8_PSCI definition
Hongbo Zhang
- [U-Boot] [PATCH v5 2/6] ARMv8: Add secure sections for PSCI text and data
Hongbo Zhang
- [U-Boot] [PATCH v5 3/6] ARMv8: Enable SMC instruction
Hongbo Zhang
- [U-Boot] [PATCH v5 4/6] ARMv8: Add basic PSCI framework
Hongbo Zhang
- [U-Boot] [PATCH v5 5/6] ARMv8: Setup PSCI memory and device tree
Hongbo Zhang
- [U-Boot] [PATCH v5 6/6] ARMv8: LS1043A: Enable LS1043A default PSCI support
Hongbo Zhang
- [U-Boot] [linux-sunxi] Re: [RFC PATCH 0/3] sunxi: video: Add support for HDMI output on H3
Icenowy Zheng
- [U-Boot] [PATCH 1/2] sunxi: add proper device tree for Orange Pi Zero boards
Icenowy Zheng
- [U-Boot] [PATCH 2/2] sunxi: add orangepi zero defconfig
Icenowy Zheng
- [U-Boot] Problems to Allwinner H3's eFUSE/SID
Icenowy Zheng
- [U-Boot] Problems to Allwinner H3's eFUSE/SID
Icenowy Zheng
- [U-Boot] [PATCH 1/2] sunxi: add proper device tree for Orange Pi Zero boards
Icenowy Zheng
- [U-Boot] Problems to Allwinner H3's eFUSE/SID
Icenowy Zheng
- [U-Boot] [PATCH] sunxi: fix SID read on H3
Icenowy Zheng
- [U-Boot] [PATCH 1/2] sunxi: add proper device tree for Lichee Pi One
Icenowy Zheng
- [U-Boot] [PATCH 2/2] sunxi: add support for Lichee Pi One device
Icenowy Zheng
- [U-Boot] [PATCH] sunxi: add an environment variable for boot media
Icenowy Zheng
- [U-Boot] [PATCH 1/2] sunxi: power: add AXP803 support
Icenowy Zheng
- [U-Boot] [PATCH 2/2] sunxi: enable DLDO4 and DC1SW for Pine64+
Icenowy Zheng
- [U-Boot] [PATCH v2] sunxi: add support for Lichee Pi One device
Icenowy Zheng
- [U-Boot] [PATCH] sunxi: makes an invisible option for H3-like DRAM controllers
Icenowy Zheng
- [U-Boot] [PATCH] sunxi: H3/A64: fix non-ODT setting
Icenowy Zheng
- [U-Boot] [RFC PATCH 0/4] sunxi: add support for Allwinner V3s
Icenowy Zheng
- [U-Boot] [RFC PATCH 1/4] sunxi: add DDR2 support to H3-like DRAM controller
Icenowy Zheng
- [U-Boot] [RFC PATCH 2/4] sunxi: add basic V3s support
Icenowy Zheng
- [U-Boot] [RFC PATCH 3/4] sunxi: add stub device trees for V3s and Lichee Pi Zero board
Icenowy Zheng
- [U-Boot] [RFC PATCH 4/4] sunxi: low memory footprint for V3s
Icenowy Zheng
- [U-Boot] [PATCH 2/5] mmc: tegra: introduce CONFIG_TEGRA_MMC to Kconfig
Marcel Ziswiler
- [U-Boot] [PATCH 3/5] mmc: tegra: move CONFIG_TEGRA_MMC from headers to defconfigs
Marcel Ziswiler
- [U-Boot] [PATCH 4/5] mmc: tegra: allow disabling external clock loopback
Marcel Ziswiler
- [U-Boot] net: e1000: support for intel 82579
Marcel Ziswiler
- [U-Boot] [PATCH v2 0/5] arm: tegra: apalis-tk1, mmc and ext clock loopback
Marcel Ziswiler
- [U-Boot] [PATCH v2 1/5] arm: tegra: initial support for apalis tk1
Marcel Ziswiler
- [U-Boot] [PATCH v2 2/5] mmc: tegra: introduce CONFIG_TEGRA_MMC to Kconfig
Marcel Ziswiler
- [U-Boot] [PATCH v2 3/5] mmc: tegra: move CONFIG_TEGRA_MMC from headers to defconfigs
Marcel Ziswiler
- [U-Boot] [PATCH v2 4/5] mmc: tegra: allow disabling external clock loopback
Marcel Ziswiler
- [U-Boot] [PATCH v2 5/5] apalis-tk1: disable external clock loopback on SDMMC3
Marcel Ziswiler
- [U-Boot] [PATCH 0/4] arm: tegra: colibri_t20: ulpi reset polarity fix & various other patches
Marcel Ziswiler
- [U-Boot] [PATCH 1/4] video: tegra: fix spelling in comment
Marcel Ziswiler
- [U-Boot] [PATCH 2/4] pci: kconfig: fix spelling in description
Marcel Ziswiler
- [U-Boot] [PATCH 3/4] apalis_t30: comment about disabled pcie nodes
Marcel Ziswiler
- [U-Boot] [PATCH 4/4] colibri_t20: fix ulpi reset polarity
Marcel Ziswiler
- [U-Boot] [PATCH v2 1/5] arm: tegra: initial support for apalis tk1
Marcel Ziswiler
- [U-Boot] [PATCH v3 0/6] arm: tegra: apalis-tk1, mmc and ext clock loopback
Marcel Ziswiler
- [U-Boot] [PATCH v3 1/6] arm: tegra: initial support for apalis tk1
Marcel Ziswiler
- [U-Boot] [PATCH v3 2/6] mmc: tegra: introduce CONFIG_TEGRA_MMC to Kconfig
Marcel Ziswiler
- [U-Boot] [PATCH v3 3/6] mmc: tegra: move CONFIG_TEGRA_MMC from headers to defconfigs
Marcel Ziswiler
- [U-Boot] [PATCH v3 4/6] mmc: tegra: allow disabling external clock loopback
Marcel Ziswiler
- [U-Boot] [PATCH v3 5/6] apalis-tk1: disable external clock loopback on SDMMC3
Marcel Ziswiler
- [U-Boot] [PATCH v3 6/6] apalis-tk1: clean-up defconfig
Marcel Ziswiler
- [U-Boot] [PATCH] nds32: Support mmc DM.
uboot at andestech.com
- [U-Boot] Uboot send pull request
uboot at andestech.com
- [U-Boot] VAR-SOM-MX6 - Boot Count Limit support?
brendan
- [U-Boot] Enable redundant u-boot environment for iMX6 (Yocto)
brendan
- [U-Boot] [PATCH 07/10] arm: socfpga: arria10: Added miscellaneous drivers for Arria10
dinguyen
- [U-Boot] [PATCH 1/3] arm: baltos: remove TI board leftover
yegorslists at googlemail.com
- [U-Boot] [PATCH 2/3] arm: baltos: active mPCIe slot
yegorslists at googlemail.com
- [U-Boot] [PATCH 3/3] arm: baltos: enable booting from USB
yegorslists at googlemail.com
- [U-Boot] flash the images to NAND automatically with SD Boot in uboot?
grbesd1
- [U-Boot] flash the images to NAND automatically with SD Boot in uboot?
grbesd1
- [U-Boot] How to make I2C probe like commands working in u-boot
lsunkara
- [U-Boot] Uboot for Wakame Board (New ARM single board openhardware computer).
madscientist
- [U-Boot] [PATCH v2 0/6] arm64: mvebu: Armada-8K family patches
kostap at marvell.com
- [U-Boot] [PATCH v2 1/6] arm64: mvebu: Modify the A8K SPI and I2C config in DTS
kostap at marvell.com
- [U-Boot] [PATCH v2 2/6] arm64: mvebu: Add bubt command for flash image burn
kostap at marvell.com
- [U-Boot] [PATCH v2 3/6] arm64: mvebu: pinctrl: Add pin control driver for A8K family
kostap at marvell.com
- [U-Boot] [PATCH v2 4/6] arm64: mvebu: Add pin control nodes to A8K family DTS files
kostap at marvell.com
- [U-Boot] [PATCH v2 5/6] arm64: mvebu: Enable BUBT command support in A8K default config
kostap at marvell.com
- [U-Boot] [PATCH v2 6/6] arm64: mvebu: Enable pin control support in A8K default config
kostap at marvell.com
- [U-Boot] [PATCH 0/3] arm64: mvebu: Linux kernel boot support
kostap at marvell.com
- [U-Boot] [PATCH 1/3] arm64: mvebu: Add L3 cache flush functionality to A8K family
kostap at marvell.com
- [U-Boot] [PATCH 2/3] arm64: mvebu: Enable PCIe support in Armada-7040 configuration
kostap at marvell.com
- [U-Boot] [PATCH 3/3] arm64: mvebu: Enable hush parser in A8K default configuration
kostap at marvell.com
- [U-Boot] [PATCH v3 3/6] arm64: mvebu: pinctrl: Add pin control driver for A8K family
kostap at marvell.com
- [U-Boot] [PATCH v3 0/6] arm64: mvebu: Armada-8K family patches
kostap at marvell.com
- [U-Boot] [PATCH v3 1/6] arm64: mvebu: Modify the A8K SPI and I2C config in DTS
kostap at marvell.com
- [U-Boot] [PATCH v3 2/6] arm64: mvebu: Add bubt command for flash image burn
kostap at marvell.com
- [U-Boot] [PATCH v3 3/6] arm64: mvebu: pinctrl: Add pin control driver for A8K family
kostap at marvell.com
- [U-Boot] [PATCH v3 4/6] arm64: mvebu: Add pin control nodes to A8K family DTS files
kostap at marvell.com
- [U-Boot] [PATCH v3 5/6] arm64: mvebu: Enable BUBT command support in A8K default config
kostap at marvell.com
- [U-Boot] [PATCH v3 6/6] arm64: mvebu: Enable pin control support in A8K default config
kostap at marvell.com
- [U-Boot] [PATCH] arm64: mvebu: Fix A8K memory mapping and add documentation
kostap at marvell.com
- [U-Boot] [PATCH v2] arm64: mvebu: Fix A8K memory mapping and add documentation
kostap at marvell.com
- [U-Boot] [PATCH 0/7] arm64: mvebu: Add support for A8K community board
kostap at marvell.com
- [U-Boot] [PATCH 1/7] arm64: mvebu: Update bubt command MMC block device access
kostap at marvell.com
- [U-Boot] [PATCH 2/7] arm64: mvebu: gpio: Add GPIO nodes to A8K family devices
kostap at marvell.com
- [U-Boot] [PATCH 3/7] arm64: mvebu: dts: Add i2c1 pin definitions to CPM
kostap at marvell.com
- [U-Boot] [PATCH 4/7] mvebu: usb: xhci: Add support for VBUS controlled by GPIO
kostap at marvell.com
- [U-Boot] [PATCH 5/7] mvebu: pcie: Add support for GPIO reset for PCIe device
kostap at marvell.com
- [U-Boot] [PATCH 6/7] arm64: mvebu: dts: Add DTS file for MACCHIATOBin board
kostap at marvell.com
- [U-Boot] [PATCH 7/7] arm64: mvebu: Add default configuraton for MACCHIATOBin board
kostap at marvell.com
- [U-Boot] [PATCH v4 0/1] cmd: pci: add option to parse and display BAR information
yehuday at marvell.com
- [U-Boot] [PATCH v4 1/1] cmd: pci: add option to parse and display BAR information
yehuday at marvell.com
- [U-Boot] [PATCH v3 0/2] ARM: dts: at91: add dts files for the boards of SAMA5D4
Wenyou.Yang at microchip.com
- [U-Boot] [PATCH] armv8: fsl-lsch3: enable snoopable sata read and write
yuantian.tang at nxp.com
- [U-Boot] [PATCH 1/2] armv8: ls1046a: added usb feature support
yuantian.tang at nxp.com
- [U-Boot] [PATCH 2/2] armv8: ls1046a: enable usb in defconfig
yuantian.tang at nxp.com
- [U-Boot] [PATCH 1/2] armv8: ls1012: added usb nodes in dts
yuantian.tang at nxp.com
- [U-Boot] [PATCH 2/2] armv8: ls1012: Enable CONFIG_DM_USB in defconfigs
yuantian.tang at nxp.com
- [U-Boot] [PATCH] armv8: ls1046aqds: added usb feature support
yuantian.tang at nxp.com
- [U-Boot] genext2fs fix for supporting filesystems generated by genext2fs
stefan.bruens at rwth-aachen.de
- [U-Boot] [PATCH] mpc85xx: pci: Implement workaround for Erratum A007815
york sun
- [U-Boot] [PATCH] powerpc: Retain compatible property for L2 cache
york sun
- [U-Boot] Travis CI
york sun
- [U-Boot] Please pull u-boot-mpc85xx master
york sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
york sun
- [U-Boot] [PATCH 1/4 v2] fsl/ddr: Fix compiling warning
york sun
- [U-Boot] [PATCH 2/4 v3] fsl/ddr: Add erratum_a009942_check_cpo and clean related erratum
york sun
- [U-Boot] [PATCH] armv8: ls2080a: Add serdes1 protocol 0x3b support
york sun
- [U-Boot] [PATCH v2] ls1021a: QSPI: update the node for QSPI support
york sun
- [U-Boot] [PATCH v2] fsl/usb: enable the errata-a005697 for ls1012a
york sun
- [U-Boot] [PATCH v3] armv8: QSPI: Add AHB bus 16MB+ size support
york sun
- [U-Boot] [PATCHv4 02/16] dm: pci: return the real controller in pci_bus_to_hose()
york sun
- [U-Boot] [PATCH 2/2] armv8: ls1012a: define esdhc_status_fixup for QDS board
york sun
- [U-Boot] [PATCH v6 1/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 GIC node
york sun
- [U-Boot] [PATCH v6 1/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 GIC node
york sun
- [U-Boot] [PATCH] armv8/fsl_lsch2: Add the OCRAM initialization
york sun
- [U-Boot] [PATCH 1/2] armv8: Enable CPUECTLR.SMPEN for coherency
york sun
- [U-Boot] [PATCH 1/2] armv8: Enable CPUECTLR.SMPEN for coherency
york sun
- [U-Boot] [PATCHv2 1/2] ARMv8/fsl-layerscape: Correct the OCRAM size
york sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
york sun
- [U-Boot] [PATCH 3/4] fsl/ddr: Enable erratum-a009942 workaround for B/T-series
york sun
- [U-Boot] [PATCH 4/4] fsl/board/ddr: optimize board-specific cpo for erratum A-009942
york sun
- [U-Boot] [PATCH 1/2] armv8: ls1043ardb: dts: Fix the unit-address of some I2C device nodes
york sun
- [U-Boot] [PATCH 2/2] armv8: ls1043a: dts: Fix the ranges table of IFC node
york sun
- [U-Boot] [PATCH] driver: fsl-mc: qbman: Add QBMAN 4.1 support
york sun
- [U-Boot] [PATCH v5 0/6] Add ARMv8 PSCI framework
york sun
- [U-Boot] [PATCH] driver: net: fsl-mc: Update MC memory allocation code
york sun
- [U-Boot] [RESEND PATCH v2] powerpc: Retain compatible property for L2 cache
york sun
- [U-Boot] Please pull u-boot-mpc85xx master
york sun
- [U-Boot] [PATCH v2] powerpc: Retain compatible property for L2 cache
york sun
- [U-Boot] [PATCH] driver: net: fsl-mc: Update MC memory allocation code
york sun
- [U-Boot] [PATCH v3 2/9] ARM: DTS: stm32: add stm32f746-disco device tree files
vikas
- [U-Boot] [PATCH v3 3/9] ARM: stm32: cleanup stm32f7 files
vikas
- [U-Boot] [PATCH v3 4/9] ARM: stm32: fix stm32f7 sdram fmc base address
vikas
- [U-Boot] [PATCH v3 5/9] ARM: stm32: use clock setup function defined in clock.c
vikas
- [U-Boot] [PATCH v3 6/9] net: stm32: add designware mac glue code for stm32
vikas
- [U-Boot] [PATCH v2 1/4] mmc: sdhci: Distinguish between base clock and maximum peripheral frequency
Stefan.Herbrechtsmeier at weidmueller.de
- [U-Boot] [PATCH v3 0/4] mmc: sdhci: Add support for frequency constrained peripheral interfaces
Stefan.Herbrechtsmeier at weidmueller.de
- [U-Boot] [PATCH v3 0/4] mmc: sdhci: Add support for frequency constrained peripheral interfaces
stefan.herbrechtsmeier at weidmueller.de
- [U-Boot] [PATCH v3 1/4] mmc: sdhci: Distinguish between base clock and maximum peripheral frequency
stefan.herbrechtsmeier at weidmueller.de
- [U-Boot] [PATCH v3 2/4] serial: zynq: Remove unused index from get uart clock function
stefan.herbrechtsmeier at weidmueller.de
- [U-Boot] [PATCH v3 3/4] mmc: zynq: Determine base clock frequency via clock framework
stefan.herbrechtsmeier at weidmueller.de
- [U-Boot] [PATCH v3 4/4] mmc: zynq: Add fdt max-frequency support
stefan.herbrechtsmeier at weidmueller.de
- [U-Boot] [RFC PATCH 1/3] sunxi: Add clocks for DE2/HDMI/TCON
Jernej Škrabec
- [U-Boot] [RFC PATCH 2/3] sunxi: video: Add video driver for H3 SoC
Jernej Škrabec
- [U-Boot] [RFC PATCH 2/3] sunxi: video: Add video driver for H3 SoC
Jernej Škrabec
- [U-Boot] driver micrel ksz8873 in U-BOOT
Дмитрий Мелоневич
Last message date:
Sat Dec 31 19:05:50 CET 2016
Archived on: Sat Dec 31 19:06:14 CET 2016
This archive was generated by
Pipermail 0.09 (Mailman edition).