[U-Boot] [PATCH v2] ARM: dt: zynq: Add labels to cpu nodes to allow overriding OPPs.

[Michal Simek]

On 12.12.2016 17:48, Moritz Fischer wrote:
> By adding labels to the cpu nodes in the dtsi, a dts that
> includes it can change the OPPs by referencing the cpu0
> through the label.
> 
> [Based on linux (400b6a0cbef55d1ae32808eaa1ef1c28820bf6ac)]
> Signed-off-by: Moritz Fischer <moritz.fischer at ettus.com>
> Cc: Michal Simek <michal.simek at xilinx.com>
> Cc: u-boot at lists.denx.de
> ---
> 
> Ok, since I fatfingered v1 ... this one with right subject
> prefix, and only one patch in 'series'.
> 
> Changes from v1: None
> 
> Sorry 'bout the noise,
> 
> Moritz
> 
> ---
>  arch/arm/dts/zynq-7000.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
> index 6df0329..668f54e 100644
> --- a/arch/arm/dts/zynq-7000.dtsi
> +++ b/arch/arm/dts/zynq-7000.dtsi
> @@ -16,7 +16,7 @@
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> -		cpu at 0 {
> +		cpu0: cpu at 0 {
>  			compatible = "arm,cortex-a9";
>  			device_type = "cpu";
>  			reg = <0>;
> @@ -30,7 +30,7 @@
>  			>;
>  		};
>  
> -		cpu at 1 {
> +		cpu1: cpu at 1 {
>  			compatible = "arm,cortex-a9";
>  			device_type = "cpu";
>  			reg = <1>;
> 

Applied.

Thanks,
Michal