[U-Boot] [PATCH v2 1/4] mx6qsabreauto: Configure the WEIM controller like the kernel

[Fabio Estevam]

Do the same WEIM initialization as done in the Linux kernel
according to arch/arm/boot/dts/imx6qdl-sabreauto.dtsi from kernel 4.9.

Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
Changes since v1:
- None

 board/freescale/mx6qsabreauto/mx6qsabreauto.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index 5fca4d1..13a9b5a 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -221,12 +221,20 @@ static void eimnor_cs_setup(void)
 {
 	struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR;
 
-	writel(0x00020181, &weim_regs->cs0gcr1);
+	/*
+	 * Configure weim like the linux kernel.
+	 * From arch/arm/boot/dts/imx6qdl-sabreauto.dtsi:
+	 *
+	 * fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+	 *		      	 0x0000c000 0x1404a38e 0x00000000>;
+	 */
+
+	writel(0x00620081, &weim_regs->cs0gcr1);
 	writel(0x00000001, &weim_regs->cs0gcr2);
-	writel(0x0a020000, &weim_regs->cs0rcr1);
+	writel(0x1c022000, &weim_regs->cs0rcr1);
 	writel(0x0000c000, &weim_regs->cs0rcr2);
-	writel(0x0804a240, &weim_regs->cs0wcr1);
-	writel(0x00000120, &weim_regs->wcr);
+	writel(0x1404a38e, &weim_regs->cs0wcr1);
+	writel(0x00000000, &weim_regs->wcr);
 
 	set_chipselect_size(CS0_128);
 }
-- 
2.7.4