[U-Boot] [PATCH v3 1/2] Convert CONFIG_SPL_RAM_DEVICE to defconfig

[Stefan Agner]

From: Stefan Agner <stefan.agner at toradex.com>

This converts the following to Kconfig:
  CONFIG_SPL_RAM_DEVICE

Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
---

Changes in v3: None
Changes in v2: None

 common/spl/Kconfig                   | 9 +++++++++
 include/configs/microblaze-generic.h | 1 -
 include/configs/socfpga_common.h     | 1 -
 include/configs/tegra-common.h       | 1 -
 include/configs/xilinx_zynqmp.h      | 1 -
 include/configs/zynq-common.h        | 1 -
 6 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index cba51f5df6..ea084f462b 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -449,6 +449,15 @@ config SPL_POWER_SUPPORT
 	  in drivers/power, drivers/power/pmic and drivers/power/regulator
 	  as part of an SPL build.
 
+config SPL_RAM_DEVICE
+	bool "Support booting from preloaded image in RAM"
+	depends on SPL
+	default y if MICROBLAZE || ARCH_SOCFPGA || TEGRA || ARCH_ZYNQ
+	help
+	  Enable booting of an image already loaded in RAM. The image has to
+	  be already in memory when SPL takes over, e.g. loaded by the boot
+	  ROM.
+
 config SPL_SATA_SUPPORT
 	bool "Support loading from SATA"
 	depends on SPL
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 7abffdb2ef..cc90b73fa1 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -284,7 +284,6 @@
 
 #define CONFIG_SPL_LDSCRIPT	"arch/microblaze/cpu/u-boot-spl.lds"
 
-#define CONFIG_SPL_RAM_DEVICE
 #ifdef CONFIG_SYS_FLASH_BASE
 # define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_FLASH_BASE
 #endif
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 58a6550844..7292469433 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -309,7 +309,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
  * 0xFFFF_FF00 ...... End of SRAM
  */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_RAM_DEVICE
 #define CONFIG_SPL_TEXT_BASE		CONFIG_SYS_INIT_RAM_ADDR
 #define CONFIG_SPL_MAX_SIZE		(64 * 1024)
 
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index 23a0e782e0..f30fec84a2 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -98,7 +98,6 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_RAM_DEVICE
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_MAX_FOOTPRINT	(CONFIG_SYS_TEXT_BASE - \
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index fb4f6d6806..8845ff425d 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -260,7 +260,6 @@
 
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_RAM_DEVICE
 
 /* u-boot is like dtb */
 #define CONFIG_SPL_FS_LOAD_ARGS_NAME	"u-boot.bin"
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 953e7311a6..e04be5c18c 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -296,7 +296,6 @@
 #define CONFIG_CMD_SPL
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_RAM_DEVICE
 
 #define CONFIG_SPL_LDSCRIPT	"arch/arm/mach-zynq/u-boot-spl.lds"
 
-- 
2.11.0