[U-Boot] [PATCH v3 3/4] mmc: zynq: Determine base clock frequency via clock framework

[Jaehoon Chung]

Dear Michal,

On 12/06/2016 09:59 PM, Michal Simek wrote:
> On 5.12.2016 23:22, Jaehoon Chung wrote:
>> On 12/02/2016 10:24 PM, stefan.herbrechtsmeier at weidmueller.de wrote:
>>> From: Stefan Herbrechtsmeier <stefan.herbrechtsmeier at weidmueller.de>
>>>
>>> The zynq_sdhci controller driver use CONFIG_ZYNQ_SDHCI_MAX_FREQ as base
>>> clock frequency but this clock is not fixed and depends on the hardware
>>> configuration. Additionally the value of CONFIG_ZYNQ_SDHCI_MAX_FREQ
>>> doesn't match the real base clock frequency of SDIO_FREQ. Use the clock
>>> framework to determine the frequency at run time.
>>>
>>> Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier at weidmueller.de>
>>
>>
>> Even if this patch is delegated to Michal, i picked to this.
>> Applied on u-boot-mmc. 
>>
> 
> Based on my reply in v2 this is not ideal patch
> http://lists.denx.de/pipermail/u-boot/2016-November/274310.html
> 
> Not a problem to take these patches should mmc tree but please wait till
> you have Ack from me.

Thanks for noticing this. 
I will wait for your ack. So I will rebase u-boot-mmc without these patches.

Best Regards,
Jaehoon Chung

> 
> Thanks,
> Michal
> 
> 
> 
>