[U-Boot] [RFC PATCH 0/3] sunxi: video: Add support for HDMI output on H3

[Hans de Goede]

Hi,

On 13-12-16 21:28, Simon Glass wrote:
> Hi,
>
> On 12 December 2016 at 19:36, Jernej Skrabec <jernej.skrabec at siol.net> wrote:
>> This patch series add support for HDMI output. Support for other,
>> newer, SoCs, which also uses DE2 and same or similar HDMI controller
>> and PHY can be easily added later (A83T/A64/H5/R40). Current driver
>> can also be easily extended with TV out support, just like video
>> driver for older Allwinner SoCs.
>>
>> While driver works, I would like to get few opinions first.
>> - From what I understand, drivers which supports DT are preferred.
>>   Would it be better to rewrite this driver to support device tree?
>
> Yes I think so, and in fact it should use driver model also.
>
> The rockchip driver provides a reasonable example of how to split the
> driver up as you suggest below. The VIDEO driver provides the
> top-level video interface, DISPLAY drivers provide display output for
> the video, and you have PANEL as well for receiving the display
> output. VIDCONSOLE works automatically to display text.
>
> I actually took a bit of a look at this a few weeks ago so am happy to
> help with review or discussions.

I'm all in favor of moving to the driver-model, but I believe that
we first need proper support for the DE2 and new HMDI encoder in
the kernel, so that the dt bindings are clear.

Once that is in place it would be good to look into converting the
u-boot code to the driver-model. Since that likely is going to
take a while I think it would be good to move ahead with this
patch set as is (with review comments addressed) and later replace
it with a driver-model based implementation. But that is no longer
my call :)

Regards,

Hans