[U-Boot] [PATCH v2 1/6] arm64: mvebu: Modify the A8K SPI and I2C config in DTS
Stefan Roese
sr at denx.de
Tue Dec 6 07:12:49 CET 2016
Hi Kosta,
On 04.12.2016 17:12, kostap at marvell.com wrote:
> From: Konstantin Porotchkin <kostap at marvell.com>
>
> Align the Armada-8040-db and Armada-7040-db SPI and I2C
> DTS settings with latest DB settings:
> - 8040-db: disable i2c0 and spi0 on AP (MPPs are reserved for SDIO)
> - 8040-db: disable cps_i2c0 on CP1
> - 8040-db: enable spi1 on CP1 (the new location of the boot flash)
> The spi1 on CP1 is aliased as spi0 since this is the way
> the driver enumerates it.
>
> Changes for v2:
> - 7040-db: remove i2c0 and spi0 entries from AP (MPPs are reserved for SDIO)
>
> Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
> Cc: Stefan Roese <sr at denx.de>
> Cc: Nadav Haklai <nadavh at marvell.com>
> Cc: Neta Zur Hershkovits <neta at marvell.com>
> Cc: Omri Itach <omrii at marvell.com>
> Cc: Igal Liberman <igall at marvell.com>
> Cc: Haim Boot <hayim at marvell.com>
> Cc: Hanna Hawa <hannah at marvell.com>
> ---
Please move the patch version history below this "---" line. By doing
this, the history will not be added to the git repository (where it
does not really belong). Please do this generally for all your patches
please.
Other than this:
Reviewed-by: Stefan Roese <sr at denx.de>
> arch/arm/dts/armada-7040-db.dts | 32 ----------------------
> arch/arm/dts/armada-8040-db.dts | 60 +++++++++++++++++------------------------
> 2 files changed, 25 insertions(+), 67 deletions(-)
>
> diff --git a/arch/arm/dts/armada-7040-db.dts b/arch/arm/dts/armada-7040-db.dts
> index b8fe5a9..1e4d676 100644
> --- a/arch/arm/dts/armada-7040-db.dts
> +++ b/arch/arm/dts/armada-7040-db.dts
> @@ -66,38 +66,6 @@
> };
> };
>
> -&i2c0 {
> - status = "okay";
> - clock-frequency = <100000>;
> -};
> -
> -&spi0 {
> - status = "okay";
> -
> - spi-flash at 0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "jedec,spi-nor";
> - reg = <0>;
> - spi-max-frequency = <10000000>;
> -
> - partitions {
> - compatible = "fixed-partitions";
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - partition at 0 {
> - label = "U-Boot";
> - reg = <0 0x200000>;
> - };
> - partition at 400000 {
> - label = "Filesystem";
> - reg = <0x200000 0xce0000>;
> - };
> - };
> - };
> -};
> -
> &uart0 {
> status = "okay";
> };
> diff --git a/arch/arm/dts/armada-8040-db.dts b/arch/arm/dts/armada-8040-db.dts
> index 7fb674b..86666a1 100644
> --- a/arch/arm/dts/armada-8040-db.dts
> +++ b/arch/arm/dts/armada-8040-db.dts
> @@ -57,7 +57,7 @@
>
> aliases {
> i2c0 = &cpm_i2c0;
> - spi0 = &spi0;
> + spi0 = &cps_spi1;
> };
>
> memory at 00000000 {
> @@ -66,38 +66,6 @@
> };
> };
>
> -&i2c0 {
> - status = "okay";
> - clock-frequency = <100000>;
> -};
> -
> -&spi0 {
> - status = "okay";
> -
> - spi-flash at 0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "jedec,spi-nor";
> - reg = <0>;
> - spi-max-frequency = <10000000>;
> -
> - partitions {
> - compatible = "fixed-partitions";
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - partition at 0 {
> - label = "U-Boot";
> - reg = <0 0x200000>;
> - };
> - partition at 400000 {
> - label = "Filesystem";
> - reg = <0x200000 0xce0000>;
> - };
> - };
> - };
> -};
> -
> /* Accessible over the mini-USB CON9 connector on the main board */
> &uart0 {
> status = "okay";
> @@ -134,9 +102,31 @@
> status = "okay";
> };
>
> -&cps_i2c0 {
> +&cps_spi1 {
> status = "okay";
> - clock-frequency = <100000>;
> +
> + spi-flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <10000000>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition at 0 {
> + label = "U-Boot";
> + reg = <0 0x200000>;
> + };
> + partition at 400000 {
> + label = "Filesystem";
> + reg = <0x200000 0xce0000>;
> + };
> + };
> + };
> };
>
> /* CON4 on CP1 expansion */
>
Thanks,
Stefan
More information about the U-Boot
mailing list