[U-Boot] [PATCH 1/2] common: miiphyutil: Add helper function for mdio bus name

Michal Simek michal.simek at xilinx.com
Fri Dec 9 07:39:00 CET 2016


The most of ethernet drivers are using this mdio registration sequence.
strcpy(priv->bus->name, "emac");
mdio_register(priv->bus);
Where driver can be used only with one MDIO bus because only unique
name should be used.

Other drivers are using unique device name for MDIO registration to
support multiple instances.
snprintf(priv->bus->name, sizeof(bus->name), "%s", name);

With DM dev->seq is used more even in logs
(like random MAC address generation:
printf("\nWarning: %s (eth%d) using random MAC address - %pM\n",
       dev->name, dev->seq, pdata->enetaddr);
)
where eth%d prefix is used.

Simplify driver code to register mdio device with dev->seq number
to simplify mdio registration and reduce code duplication across
all drivers. With DM_SEQ_ALIAS enabled dev->seq reflects alias setting.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

For example:

Board: Xilinx Zynq
Net:   ZYNQ GEM: e000b000, phyaddr 7, interface rgmii-id

Warning: ethernet at e000b000 (eth0) using random MAC address -
7a:fc:90:53:6a:41
eth0: ethernet at e000b000ZYNQ GEM: e000c000, phyaddr ffffffff, interface
rgmii-id

Warning: ethernet at e000c000 (eth3) using random MAC address -
1a:ff:d7:1a:a1:b2
, eth3: ethernet at e000c000
** Bad device size - mmc 0 **
Checking if uenvcmd is set ...
Hit any key to stop autoboot:  0
Zynq> mdio list
eth0:
17 - Marvell 88E1111S <--> ethernet at e000b000
eth3:
17 - Marvell 88E1111S <--> ethernet at e000c000
Zynq>

---
 common/miiphyutil.c | 12 ++++++++++++
 include/miiphy.h    |  1 +
 2 files changed, 13 insertions(+)

diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index aca18db52a00..8eb0f761bb01 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -107,6 +107,18 @@ int mdio_register(struct mii_dev *bus)
 	return 0;
 }
 
+int mdio_register_seq(struct mii_dev *bus, int seq)
+{
+	int ret;
+
+	/* Setup a unique name for each mdio bus */
+	ret = snprintf(bus->name, MDIO_NAME_LEN, "eth%d", seq);
+	if (ret < 0)
+		return ret;
+
+	return mdio_register(bus);
+}
+
 int mdio_unregister(struct mii_dev *bus)
 {
 	if (!bus)
diff --git a/include/miiphy.h b/include/miiphy.h
index 83141b4a6ae1..df371425441d 100644
--- a/include/miiphy.h
+++ b/include/miiphy.h
@@ -48,6 +48,7 @@ void miiphy_listdev(void);
 struct mii_dev *mdio_alloc(void);
 void mdio_free(struct mii_dev *bus);
 int mdio_register(struct mii_dev *bus);
+int mdio_register_seq(struct mii_dev *bus, int seq);
 int mdio_unregister(struct mii_dev *bus);
 void mdio_list_devices(void);
 
-- 
1.9.1



More information about the U-Boot mailing list