[U-Boot] [PATCH v3 1/3] net: phy: Fix mask so that we can identify Marvell 88E1518

[Phil Edworthy]

The mask for the 88E1510 meant that the 88E1518 code would never be
used.

Signed-off-by: Phil Edworthy <phil.edworthy at renesas.com>
Reviewed-by: Stefan Roese <sr at denx.de>
Acked-by: Joe Hershberger <joe.hershberger at ni.com>
---
Note: This has only been tested on a board that uses a Marvell 88E1512
PHY, see subsequent patches.

v3:
 No changes
v2:
 No changes
---
 drivers/net/phy/marvell.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 4eeb0f6..06029c0 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -553,7 +553,7 @@ static struct phy_driver M88E1149S_driver = {
 static struct phy_driver M88E1510_driver = {
 	.name = "Marvell 88E1510",
 	.uid = 0x1410dd0,
-	.mask = 0xffffff0,
+	.mask = 0xfffffff,
 	.features = PHY_GBIT_FEATURES,
 	.config = &m88e1510_config,
 	.startup = &m88e1011s_startup,
@@ -563,7 +563,7 @@ static struct phy_driver M88E1510_driver = {
 static struct phy_driver M88E1518_driver = {
 	.name = "Marvell 88E1518",
 	.uid = 0x1410dd1,
-	.mask = 0xffffff0,
+	.mask = 0xfffffff,
 	.features = PHY_GBIT_FEATURES,
 	.config = &m88e1518_config,
 	.startup = &m88e1011s_startup,
-- 
2.7.4