[U-Boot] [PATCH v2 13/14] sunxi: Sync GR8 DTS and AXP209 with the kernel
Jagan Teki
jagan at openedev.com
Sat Dec 3 14:49:23 CET 2016
On Tue, Nov 22, 2016 at 6:08 PM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> Those DT will be part of 4.10, sync them so we can have our own config.
>
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> Reviewed-by: Hans de Goede <hdegoede at redhat.com>
> ---
> arch/arm/dts/Makefile | 1 +-
> arch/arm/dts/axp209.dtsi | 6 +-
> arch/arm/dts/ntc-gr8-chip-pro.dts | 266 +++++++-
> arch/arm/dts/ntc-gr8.dtsi | 1132 ++++++++++++++++++++++++++++++-
> 4 files changed, 1405 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/dts/ntc-gr8-chip-pro.dts
> create mode 100644 arch/arm/dts/ntc-gr8.dtsi
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 836a8c4d1ee2..932dbe07cf14 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -180,6 +180,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
> sun4i-a10-pcduino2.dtb \
> sun4i-a10-pov-protab2-ips9.dtb
> dtb-$(CONFIG_MACH_SUN5I) += \
> + ntc-gr8-chip-pro.dtb \
sun5i- prefix is better, isn't it?
> sun5i-a10s-auxtek-t003.dtb \
> sun5i-a10s-auxtek-t004.dtb \
> sun5i-a10s-mk802.dtb \
> diff --git a/arch/arm/dts/axp209.dtsi b/arch/arm/dts/axp209.dtsi
> index afbe89c01df5..675bb0f30825 100644
> --- a/arch/arm/dts/axp209.dtsi
> +++ b/arch/arm/dts/axp209.dtsi
> @@ -53,6 +53,12 @@
> interrupt-controller;
> #interrupt-cells = <1>;
>
> + axp_gpio: gpio {
> + compatible = "x-powers,axp209-gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> regulators {
> /* Default work frequency for buck regulators */
> x-powers,dcdc-freq = <1500>;
> diff --git a/arch/arm/dts/ntc-gr8-chip-pro.dts b/arch/arm/dts/ntc-gr8-chip-pro.dts
> new file mode 100644
> index 000000000000..c4be912df481
> --- /dev/null
> +++ b/arch/arm/dts/ntc-gr8-chip-pro.dts
> @@ -0,0 +1,266 @@
> +/*
> + * Copyright 2016 Free Electrons
> + * Copyright 2016 NextThing Co
> + *
> + * Maxime Ripard <maxime.ripard at free-electrons.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "ntc-gr8.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + model = "NextThing C.H.I.P. Pro";
> + compatible = "nextthing,chip-pro", "nextthing,gr8";
> +
> + aliases {
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + serial0 = &uart1;
> + serial1 = &uart2;
> + serial2 = &uart3;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + status {
> + label = "chip-pro:white:status";
> + gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
> + default-state = "on";
> + };
> + };
> +
> + mmc0_pwrseq: mmc0_pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_reg_on_pin_chip_pro>;
> + reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
> + };
> +};
> +
> +&codec {
> + status = "okay";
> +};
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins_a>;
> + status = "okay";
> +
> + axp209: pmic at 34 {
> + reg = <0x34>;
> +
> + /*
> + * The interrupt is routed through the "External Fast
> + * Interrupt Request" pin (ball G13 of the module)
> + * directly to the main interrupt controller, without
> + * any other controller interfering.
> + */
> + interrupts = <0>;
> + };
> +};
> +
> +#include "axp209.dtsi"
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins_a>;
> + status = "disabled";
> +};
> +
> +&i2s0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
> + status = "disabled";
> +};
> +
> +&mmc0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc0_pins_a>;
> + vmmc-supply = <®_vcc3v3>;
> + mmc-pwrseq = <&mmc0_pwrseq>;
> + bus-width = <4>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&nfc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
> + status = "okay";
> +
> + nand at 0 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + reg = <0>;
> + allwinner,rb = <0>;
> + nand-ecc-mode = "hw";
> + };
> +};
> +
> +&ohci0 {
> + status = "okay";
> +};
> +
> +&otg_sram {
> + status = "okay";
> +};
> +
> +&pio {
> + usb0_id_pin_chip_pro: usb0-id-pin at 0 {
> + allwinner,pins = "PG2";
> + allwinner,function = "gpio_in";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + wifi_reg_on_pin_chip_pro: wifi-reg-on-pin at 0 {
> + allwinner,pins = "PB10";
> + allwinner,function = "gpio_out";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +};
> +
> +&pwm {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins>;
> + status = "disabled";
> +};
> +
> +®_dcdc2 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-name = "vdd-cpu";
> + regulator-always-on;
> +};
> +
> +®_dcdc3 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-name = "vdd-sys";
> + regulator-always-on;
> +};
> +
> +®_ldo1 {
> + regulator-name = "vdd-rtc";
> +};
> +
> +®_ldo2 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "avcc";
> + regulator-always-on;
> +};
> +
> +/*
> + * Both LDO3 and LDO4 are used in parallel to power up the
> + * WiFi/BT chip.
> + */
> +®_ldo3 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-wifi-1";
> + regulator-always-on;
> +};
> +
> +®_ldo4 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-wifi-2";
> + regulator-always-on;
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart2_pins_a>, <&uart2_cts_rts_pins_a>;
> + status = "disabled";
> +};
> +
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart3_pins_a>, <&uart3_cts_rts_pins_a>;
> + status = "okay";
> +};
> +
> +&usb_otg {
> + /*
> + * The CHIP Pro doesn't have a controllable VBUS, nor does it
> + * have any 5v rail on the board itself.
> + *
> + * If one wants to use it as a true OTG port, it should be
> + * done in the baseboard, and its DT / overlay will add it.
> + */
> + dr_mode = "otg";
> + status = "okay";
> +};
> +
> +&usb_power_supply {
> + status = "okay";
> +};
> +
> +&usbphy {
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb0_id_pin_chip_pro>;
> + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
> + usb0_vbus_power-supply = <&usb_power_supply>;
> + usb1_vbus-supply = <®_vcc5v0>;
> + status = "okay";
> +};
> diff --git a/arch/arm/dts/ntc-gr8.dtsi b/arch/arm/dts/ntc-gr8.dtsi
> new file mode 100644
> index 000000000000..ea86d4d58db6
> --- /dev/null
> +++ b/arch/arm/dts/ntc-gr8.dtsi
> @@ -0,0 +1,1132 @@
> +/*
> + * Copyright 2016 Mylène Josserand
> + *
> + * Mylène Josserand <mylene.josserand at free-electrons.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include <dt-bindings/clock/sun4i-a10-pll2.h>
> +#include <dt-bindings/dma/sun4i-a10.h>
> +#include <dt-bindings/pinctrl/sun4i-a10.h>
> +
> +/ {
> + interrupt-parent = <&intc>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a8";
> + reg = <0x0>;
> + clocks = <&cpu>;
> + };
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + /*
> + * This is a dummy clock, to be used as placeholder on
> + * other mux clocks when a specific parent clock is not
> + * yet implemented. It should be dropped when the driver
> + * is complete.
> + */
> + dummy: dummy {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <0>;
> + };
> +
> + osc24M: clk at 01c20050 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-osc-clk";
> + reg = <0x01c20050 0x4>;
> + clock-frequency = <24000000>;
> + clock-output-names = "osc24M";
> + };
> +
> + osc3M: osc3M-clk {
> + compatible = "fixed-factor-clock";
> + #clock-cells = <0>;
> + clock-div = <8>;
> + clock-mult = <1>;
> + clocks = <&osc24M>;
> + clock-output-names = "osc3M";
> + };
> +
> + osc32k: clk at 0 {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + clock-output-names = "osc32k";
> + };
> +
> + pll1: clk at 01c20000 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-pll1-clk";
> + reg = <0x01c20000 0x4>;
> + clocks = <&osc24M>;
> + clock-output-names = "pll1";
> + };
> +
> + pll2: clk at 01c20008 {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun5i-a13-pll2-clk";
> + reg = <0x01c20008 0x8>;
> + clocks = <&osc24M>;
> + clock-output-names = "pll2-1x", "pll2-2x",
> + "pll2-4x", "pll2-8x";
> + };
> +
> + pll3: clk at 01c20010 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-pll3-clk";
> + reg = <0x01c20010 0x4>;
> + clocks = <&osc3M>;
> + clock-output-names = "pll3";
> + };
> +
> + pll3x2: pll3x2-clk {
> + compatible = "allwinner,sun4i-a10-pll3-2x-clk";
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <2>;
> + clocks = <&pll3>;
> + clock-output-names = "pll3-2x";
> + };
> +
> + pll4: clk at 01c20018 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-pll1-clk";
> + reg = <0x01c20018 0x4>;
> + clocks = <&osc24M>;
> + clock-output-names = "pll4";
> + };
> +
> + pll5: clk at 01c20020 {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun4i-a10-pll5-clk";
> + reg = <0x01c20020 0x4>;
> + clocks = <&osc24M>;
> + clock-output-names = "pll5_ddr", "pll5_other";
> + };
> +
> + pll6: clk at 01c20028 {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun4i-a10-pll6-clk";
> + reg = <0x01c20028 0x4>;
> + clocks = <&osc24M>;
> + clock-output-names = "pll6_sata", "pll6_other", "pll6";
> + };
> +
> + pll7: clk at 01c20030 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-pll3-clk";
> + reg = <0x01c20030 0x4>;
> + clocks = <&osc3M>;
> + clock-output-names = "pll7";
> + };
> +
> + pll7x2: pll7x2-clk {
> + compatible = "allwinner,sun4i-a10-pll3-2x-clk";
> + #clock-cells = <0>;
> + clock-div = <1>;
> + clock-mult = <2>;
> + clocks = <&pll7>;
> + clock-output-names = "pll7-2x";
> + };
> +
> + /* dummy is 200M */
> + cpu: cpu at 01c20054 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-cpu-clk";
> + reg = <0x01c20054 0x4>;
> + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
> + clock-output-names = "cpu";
> + };
> +
> + axi: axi at 01c20054 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-axi-clk";
> + reg = <0x01c20054 0x4>;
> + clocks = <&cpu>;
> + clock-output-names = "axi";
> + };
> +
> + ahb: ahb at 01c20054 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun5i-a13-ahb-clk";
> + reg = <0x01c20054 0x4>;
> + clocks = <&axi>, <&cpu>, <&pll6 1>;
> + clock-output-names = "ahb";
> + /*
> + * Use PLL6 as parent, instead of CPU/AXI
> + * which has rate changes due to cpufreq
> + */
> + assigned-clocks = <&ahb>;
> + assigned-clock-parents = <&pll6 1>;
> + };
> +
> + apb0: apb0 at 01c20054 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-apb0-clk";
> + reg = <0x01c20054 0x4>;
> + clocks = <&ahb>;
> + clock-output-names = "apb0";
> + };
> +
> + apb1: clk at 01c20058 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-apb1-clk";
> + reg = <0x01c20058 0x4>;
> + clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
> + clock-output-names = "apb1";
> + };
> +
> + axi_gates: clk at 01c2005c {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun4i-a10-gates-clk";
> + reg = <0x01c2005c 0x4>;
> + clocks = <&axi>;
> + clock-indices = <0>;
> + clock-output-names = "axi_dram";
> + };
> +
> + ahb_gates: clk at 01c20060 {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun5i-a13-ahb-gates-clk";
> + reg = <0x01c20060 0x8>;
> + clocks = <&ahb>;
> + clock-indices = <0>, <1>,
> + <2>, <5>, <6>,
> + <7>, <8>, <9>,
> + <10>, <13>,
> + <14>, <17>, <20>,
> + <21>, <22>,
> + <28>, <32>, <34>,
> + <36>, <40>, <44>,
> + <46>, <51>,
> + <52>;
> + clock-output-names = "ahb_usbotg", "ahb_ehci",
> + "ahb_ohci", "ahb_ss", "ahb_dma",
> + "ahb_bist", "ahb_mmc0", "ahb_mmc1",
> + "ahb_mmc2", "ahb_nand",
> + "ahb_sdram", "ahb_emac", "ahb_spi0",
> + "ahb_spi1", "ahb_spi2",
> + "ahb_hstimer", "ahb_ve", "ahb_tve",
> + "ahb_lcd", "ahb_csi", "ahb_de_be",
> + "ahb_de_fe", "ahb_iep",
> + "ahb_mali400";
> + };
> +
> + apb0_gates: clk at 01c20068 {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun4i-a10-gates-clk";
> + reg = <0x01c20068 0x4>;
> + clocks = <&apb0>;
> + clock-indices = <0>, <3>,
> + <5>, <6>;
> + clock-output-names = "apb0_codec", "apb0_i2s0",
> + "apb0_pio", "apb0_ir";
> + };
> +
> + apb1_gates: clk at 01c2006c {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun4i-a10-gates-clk";
> + reg = <0x01c2006c 0x4>;
> + clocks = <&apb1>;
> + clock-indices = <0>, <1>,
> + <2>, <17>,
> + <18>, <19>;
> + clock-output-names = "apb1_i2c0", "apb1_i2c1",
> + "apb1_i2c2", "apb1_uart1",
> + "apb1_uart2", "apb1_uart3";
> + };
> +
> + nand_clk: clk at 01c20080 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-mod0-clk";
> + reg = <0x01c20080 0x4>;
> + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
> + clock-output-names = "nand";
> + };
> +
> + ms_clk: clk at 01c20084 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-mod0-clk";
> + reg = <0x01c20084 0x4>;
> + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
> + clock-output-names = "ms";
> + };
> +
> + mmc0_clk: clk at 01c20088 {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun4i-a10-mmc-clk";
> + reg = <0x01c20088 0x4>;
> + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
> + clock-output-names = "mmc0",
> + "mmc0_output",
> + "mmc0_sample";
> + };
> +
> + mmc1_clk: clk at 01c2008c {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun4i-a10-mmc-clk";
> + reg = <0x01c2008c 0x4>;
> + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
> + clock-output-names = "mmc1",
> + "mmc1_output",
> + "mmc1_sample";
> + };
> +
> + mmc2_clk: clk at 01c20090 {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun4i-a10-mmc-clk";
> + reg = <0x01c20090 0x4>;
> + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
> + clock-output-names = "mmc2",
> + "mmc2_output",
> + "mmc2_sample";
> + };
> +
> + ts_clk: clk at 01c20098 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-mod0-clk";
> + reg = <0x01c20098 0x4>;
> + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
> + clock-output-names = "ts";
> + };
> +
> + ss_clk: clk at 01c2009c {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-mod0-clk";
> + reg = <0x01c2009c 0x4>;
> + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
> + clock-output-names = "ss";
> + };
> +
> + spi0_clk: clk at 01c200a0 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-mod0-clk";
> + reg = <0x01c200a0 0x4>;
> + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
> + clock-output-names = "spi0";
> + };
> +
> + spi1_clk: clk at 01c200a4 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-mod0-clk";
> + reg = <0x01c200a4 0x4>;
> + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
> + clock-output-names = "spi1";
> + };
> +
> + spi2_clk: clk at 01c200a8 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-mod0-clk";
> + reg = <0x01c200a8 0x4>;
> + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
> + clock-output-names = "spi2";
> + };
> +
> + ir0_clk: clk at 01c200b0 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-mod0-clk";
> + reg = <0x01c200b0 0x4>;
> + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
> + clock-output-names = "ir0";
> + };
> +
> + i2s0_clk: clk at 01c200b8 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-mod1-clk";
> + reg = <0x01c200b8 0x4>;
> + clocks = <&pll2 SUN4I_A10_PLL2_8X>,
> + <&pll2 SUN4I_A10_PLL2_4X>,
> + <&pll2 SUN4I_A10_PLL2_2X>,
> + <&pll2 SUN4I_A10_PLL2_1X>;
> + clock-output-names = "i2s0";
> + };
> +
> + spdif_clk: clk at 01c200c0 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-mod1-clk";
> + reg = <0x01c200c0 0x4>;
> + clocks = <&pll2 SUN4I_A10_PLL2_8X>,
> + <&pll2 SUN4I_A10_PLL2_4X>,
> + <&pll2 SUN4I_A10_PLL2_2X>,
> + <&pll2 SUN4I_A10_PLL2_1X>;
> + clock-output-names = "spdif";
> + };
> +
> + usb_clk: clk at 01c200cc {
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + compatible = "allwinner,sun5i-a13-usb-clk";
> + reg = <0x01c200cc 0x4>;
> + clocks = <&pll6 1>;
> + clock-output-names = "usb_ohci0", "usb_phy";
> + };
> +
> + dram_gates: clk at 01c20100 {
> + #clock-cells = <1>;
> + compatible = "nextthing,gr8-dram-gates-clk",
> + "allwinner,sun4i-a10-gates-clk";
> + reg = <0x01c20100 0x4>;
> + clocks = <&pll5 0>;
> + clock-indices = <0>,
> + <1>,
> + <25>,
> + <26>,
> + <29>,
> + <31>;
> + clock-output-names = "dram_ve",
> + "dram_csi",
> + "dram_de_fe",
> + "dram_de_be",
> + "dram_ace",
> + "dram_iep";
> + };
> +
> + de_be_clk: clk at 01c20104 {
> + #clock-cells = <0>;
> + #reset-cells = <0>;
> + compatible = "allwinner,sun4i-a10-display-clk";
> + reg = <0x01c20104 0x4>;
> + clocks = <&pll3>, <&pll7>, <&pll5 1>;
> + clock-output-names = "de-be";
> + };
> +
> + de_fe_clk: clk at 01c2010c {
> + #clock-cells = <0>;
> + #reset-cells = <0>;
> + compatible = "allwinner,sun4i-a10-display-clk";
> + reg = <0x01c2010c 0x4>;
> + clocks = <&pll3>, <&pll7>, <&pll5 1>;
> + clock-output-names = "de-fe";
> + };
> +
> + tcon_ch0_clk: clk at 01c20118 {
> + #clock-cells = <0>;
> + #reset-cells = <1>;
> + compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
> + reg = <0x01c20118 0x4>;
> + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
> + clock-output-names = "tcon-ch0-sclk";
> + };
> +
> + tcon_ch1_clk: clk at 01c2012c {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
> + reg = <0x01c2012c 0x4>;
> + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
> + clock-output-names = "tcon-ch1-sclk";
> + };
> +
> + codec_clk: clk at 01c20140 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-codec-clk";
> + reg = <0x01c20140 0x4>;
> + clocks = <&pll2 SUN4I_A10_PLL2_1X>;
> + clock-output-names = "codec";
> + };
> +
> + mbus_clk: clk at 01c2015c {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun5i-a13-mbus-clk";
> + reg = <0x01c2015c 0x4>;
> + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
> + clock-output-names = "mbus";
> + };
> + };
> +
> + display-engine {
> + compatible = "allwinner,sun5i-a13-display-engine";
> + allwinner,pipelines = <&fe0>;
> + };
> +
> + soc at 01c00000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + sram-controller at 01c00000 {
> + compatible = "allwinner,sun4i-a10-sram-controller";
> + reg = <0x01c00000 0x30>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + sram_a: sram at 00000000 {
> + compatible = "mmio-sram";
> + reg = <0x00000000 0xc000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x00000000 0xc000>;
> + };
> +
> + sram_d: sram at 00010000 {
> + compatible = "mmio-sram";
> + reg = <0x00010000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x00010000 0x1000>;
> +
> + otg_sram: sram-section at 0000 {
> + compatible = "allwinner,sun4i-a10-sram-d";
> + reg = <0x0000 0x1000>;
> + status = "disabled";
> + };
> + };
> + };
> +
> + dma: dma-controller at 01c02000 {
> + compatible = "allwinner,sun4i-a10-dma";
> + reg = <0x01c02000 0x1000>;
> + interrupts = <27>;
> + clocks = <&ahb_gates 6>;
> + #dma-cells = <2>;
> + };
> +
> + nfc: nand at 01c03000 {
> + compatible = "allwinner,sun4i-a10-nand";
> + reg = <0x01c03000 0x1000>;
> + interrupts = <37>;
> + clocks = <&ahb_gates 13>, <&nand_clk>;
> + clock-names = "ahb", "mod";
> + dmas = <&dma SUN4I_DMA_DEDICATED 3>;
> + dma-names = "rxtx";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + spi0: spi at 01c05000 {
> + compatible = "allwinner,sun4i-a10-spi";
> + reg = <0x01c05000 0x1000>;
> + interrupts = <10>;
> + clocks = <&ahb_gates 20>, <&spi0_clk>;
> + clock-names = "ahb", "mod";
> + dmas = <&dma SUN4I_DMA_DEDICATED 27>,
> + <&dma SUN4I_DMA_DEDICATED 26>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + spi1: spi at 01c06000 {
> + compatible = "allwinner,sun4i-a10-spi";
> + reg = <0x01c06000 0x1000>;
> + interrupts = <11>;
> + clocks = <&ahb_gates 21>, <&spi1_clk>;
> + clock-names = "ahb", "mod";
> + dmas = <&dma SUN4I_DMA_DEDICATED 9>,
> + <&dma SUN4I_DMA_DEDICATED 8>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + tve0: tv-encoder at 01c0a000 {
> + compatible = "allwinner,sun4i-a10-tv-encoder";
> + reg = <0x01c0a000 0x1000>;
> + clocks = <&ahb_gates 34>;
> + resets = <&tcon_ch0_clk 0>;
> + status = "disabled";
> +
> + port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tve0_in_tcon0: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&tcon0_out_tve0>;
> + };
> + };
> + };
> +
> + tcon0: lcd-controller at 01c0c000 {
> + compatible = "allwinner,sun5i-a13-tcon";
> + reg = <0x01c0c000 0x1000>;
> + interrupts = <44>;
> + resets = <&tcon_ch0_clk 1>;
> + reset-names = "lcd";
> + clocks = <&ahb_gates 36>,
> + <&tcon_ch0_clk>,
> + <&tcon_ch1_clk>;
> + clock-names = "ahb",
> + "tcon-ch0",
> + "tcon-ch1";
> + clock-output-names = "tcon-pixel-clock";
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tcon0_in: port at 0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + tcon0_in_be0: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&be0_out_tcon0>;
> + };
> + };
> +
> + tcon0_out: port at 1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + tcon0_out_tve0: endpoint at 1 {
> + reg = <1>;
> + remote-endpoint = <&tve0_in_tcon0>;
> + };
> + };
> + };
> + };
> +
> + mmc0: mmc at 01c0f000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c0f000 0x1000>;
> + clocks = <&ahb_gates 8>,
> + <&mmc0_clk 0>,
> + <&mmc0_clk 1>,
> + <&mmc0_clk 2>;
> + clock-names = "ahb",
> + "mmc",
> + "output",
> + "sample";
> + interrupts = <32>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc1: mmc at 01c10000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c10000 0x1000>;
> + clocks = <&ahb_gates 9>,
> + <&mmc1_clk 0>,
> + <&mmc1_clk 1>,
> + <&mmc1_clk 2>;
> + clock-names = "ahb",
> + "mmc",
> + "output",
> + "sample";
> + interrupts = <33>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc2: mmc at 01c11000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c11000 0x1000>;
> + clocks = <&ahb_gates 10>,
> + <&mmc2_clk 0>,
> + <&mmc2_clk 1>,
> + <&mmc2_clk 2>;
> + clock-names = "ahb",
> + "mmc",
> + "output",
> + "sample";
> + interrupts = <34>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + usb_otg: usb at 01c13000 {
> + compatible = "allwinner,sun4i-a10-musb";
> + reg = <0x01c13000 0x0400>;
> + clocks = <&ahb_gates 0>;
> + interrupts = <38>;
> + interrupt-names = "mc";
> + phys = <&usbphy 0>;
> + phy-names = "usb";
> + extcon = <&usbphy 0>;
> + allwinner,sram = <&otg_sram 1>;
> + status = "disabled";
> +
> + dr_mode = "otg";
> + };
> +
> + usbphy: phy at 01c13400 {
> + #phy-cells = <1>;
> + compatible = "allwinner,sun5i-a13-usb-phy";
> + reg = <0x01c13400 0x10 0x01c14800 0x4>;
> + reg-names = "phy_ctrl", "pmu1";
> + clocks = <&usb_clk 8>;
> + clock-names = "usb_phy";
> + resets = <&usb_clk 0>, <&usb_clk 1>;
> + reset-names = "usb0_reset", "usb1_reset";
> + status = "disabled";
> + };
> +
> + ehci0: usb at 01c14000 {
> + compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
> + reg = <0x01c14000 0x100>;
> + interrupts = <39>;
> + clocks = <&ahb_gates 1>;
> + phys = <&usbphy 1>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> +
> + ohci0: usb at 01c14400 {
> + compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
> + reg = <0x01c14400 0x100>;
> + interrupts = <40>;
> + clocks = <&usb_clk 6>, <&ahb_gates 2>;
> + phys = <&usbphy 1>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> +
> + spi2: spi at 01c17000 {
> + compatible = "allwinner,sun4i-a10-spi";
> + reg = <0x01c17000 0x1000>;
> + interrupts = <12>;
> + clocks = <&ahb_gates 22>, <&spi2_clk>;
> + clock-names = "ahb", "mod";
> + dmas = <&dma SUN4I_DMA_DEDICATED 29>,
> + <&dma SUN4I_DMA_DEDICATED 28>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + intc: interrupt-controller at 01c20400 {
> + compatible = "allwinner,sun4i-a10-ic";
> + reg = <0x01c20400 0x400>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> +
> + pio: pinctrl at 01c20800 {
> + compatible = "nextthing,gr8-pinctrl";
> + reg = <0x01c20800 0x400>;
> + interrupts = <28>;
> + clocks = <&apb0_gates 5>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #gpio-cells = <3>;
> +
> + i2c0_pins_a: i2c0 at 0 {
> + allwinner,pins = "PB0", "PB1";
> + allwinner,function = "i2c0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + i2c1_pins_a: i2c1 at 0 {
> + allwinner,pins = "PB15", "PB16";
> + allwinner,function = "i2c1";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + i2c2_pins_a: i2c2 at 0 {
> + allwinner,pins = "PB17", "PB18";
> + allwinner,function = "i2c2";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + i2s0_data_pins_a: i2s0-data at 0 {
> + allwinner,pins = "PB6", "PB7", "PB8", "PB9";
> + allwinner,function = "i2s0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + i2s0_mclk_pins_a: i2s0-mclk at 0 {
> + allwinner,pins = "PB5";
> + allwinner,function = "i2s0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + ir0_rx_pins_a: ir0 at 0 {
> + allwinner,pins = "PB4";
> + allwinner,function = "ir0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + lcd_rgb666_pins: lcd-rgb666 at 0 {
> + allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
> + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
> + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
> + "PD24", "PD25", "PD26", "PD27";
> + allwinner,function = "lcd0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + mmc0_pins_a: mmc0 at 0 {
> + allwinner,pins = "PF0", "PF1", "PF2", "PF3",
> + "PF4", "PF5";
> + allwinner,function = "mmc0";
> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + nand_pins_a: nand-base0 at 0 {
> + allwinner,pins = "PC0", "PC1", "PC2",
> + "PC5", "PC8", "PC9", "PC10",
> + "PC11", "PC12", "PC13", "PC14",
> + "PC15";
> + allwinner,function = "nand0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + nand_cs0_pins_a: nand-cs at 0 {
> + allwinner,pins = "PC4";
> + allwinner,function = "nand0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + nand_rb0_pins_a: nand-rb at 0 {
> + allwinner,pins = "PC6";
> + allwinner,function = "nand0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + pwm0_pins_a: pwm0 at 0 {
> + allwinner,pins = "PB2";
> + allwinner,function = "pwm0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + pwm1_pins: pwm1 {
> + allwinner,pins = "PG13";
> + allwinner,function = "pwm1";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + spdif_tx_pins_a: spdif at 0 {
> + allwinner,pins = "PB10";
> + allwinner,function = "spdif";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
> + };
> +
> + uart1_pins_a: uart1 at 1 {
> + allwinner,pins = "PG3", "PG4";
> + allwinner,function = "uart1";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + uart1_cts_rts_pins_a: uart1-cts-rts at 0 {
> + allwinner,pins = "PG5", "PG6";
> + allwinner,function = "uart1";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + uart2_pins_a: uart2 at 1 {
> + allwinner,pins = "PD2", "PD3";
> + allwinner,function = "uart2";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + uart2_cts_rts_pins_a: uart2-cts-rts at 0 {
> + allwinner,pins = "PD4", "PD5";
> + allwinner,function = "uart2";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + uart3_pins_a: uart3 at 1 {
> + allwinner,pins = "PG9", "PG10";
> + allwinner,function = "uart3";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + uart3_cts_rts_pins_a: uart3-cts-rts at 0 {
> + allwinner,pins = "PG11", "PG12";
> + allwinner,function = "uart3";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> + };
> +
> + pwm: pwm at 01c20e00 {
> + compatible = "allwinner,sun5i-a10s-pwm";
> + reg = <0x01c20e00 0xc>;
> + clocks = <&osc24M>;
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + timer at 01c20c00 {
> + compatible = "allwinner,sun4i-a10-timer";
> + reg = <0x01c20c00 0x90>;
> + interrupts = <22>;
> + clocks = <&osc24M>;
> + };
> +
> + wdt: watchdog at 01c20c90 {
> + compatible = "allwinner,sun4i-a10-wdt";
> + reg = <0x01c20c90 0x10>;
> + };
> +
> + spdif: spdif at 01c21000 {
> + #sound-dai-cells = <0>;
> + compatible = "allwinner,sun4i-a10-spdif";
> + reg = <0x01c21000 0x400>;
> + interrupts = <13>;
> + clocks = <&apb0_gates 1>, <&spdif_clk>;
> + clock-names = "apb", "spdif";
> + dmas = <&dma SUN4I_DMA_NORMAL 2>,
> + <&dma SUN4I_DMA_NORMAL 2>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> + ir0: ir at 01c21800 {
> + compatible = "allwinner,sun4i-a10-ir";
> + clocks = <&apb0_gates 6>, <&ir0_clk>;
> + clock-names = "apb", "ir";
> + interrupts = <5>;
> + reg = <0x01c21800 0x40>;
> + status = "disabled";
> + };
> +
> + i2s0: i2s at 01c22400 {
> + #sound-dai-cells = <0>;
> + compatible = "allwinner,sun4i-a10-i2s";
> + reg = <0x01c22400 0x400>;
> + interrupts = <16>;
> + clocks = <&apb0_gates 3>, <&i2s0_clk>;
> + clock-names = "apb", "mod";
> + dmas = <&dma SUN4I_DMA_NORMAL 3>,
> + <&dma SUN4I_DMA_NORMAL 3>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> + lradc: lradc at 01c22800 {
> + compatible = "allwinner,sun4i-a10-lradc-keys";
> + reg = <0x01c22800 0x100>;
> + interrupts = <31>;
> + status = "disabled";
> + };
> +
> + codec: codec at 01c22c00 {
> + #sound-dai-cells = <0>;
> + compatible = "allwinner,sun4i-a10-codec";
> + reg = <0x01c22c00 0x40>;
> + interrupts = <30>;
> + clocks = <&apb0_gates 0>, <&codec_clk>;
> + clock-names = "apb", "codec";
> + dmas = <&dma SUN4I_DMA_NORMAL 19>,
> + <&dma SUN4I_DMA_NORMAL 19>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> + rtp: rtp at 01c25000 {
> + compatible = "allwinner,sun5i-a13-ts";
> + reg = <0x01c25000 0x100>;
> + interrupts = <29>;
> + #thermal-sensor-cells = <0>;
> + };
> +
> + uart1: serial at 01c28400 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28400 0x400>;
> + interrupts = <2>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&apb1_gates 17>;
> + status = "disabled";
> + };
> +
> + uart2: serial at 01c28800 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28800 0x400>;
> + interrupts = <3>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&apb1_gates 18>;
> + status = "disabled";
> + };
> +
> + uart3: serial at 01c28c00 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28c00 0x400>;
> + interrupts = <4>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&apb1_gates 19>;
> + status = "disabled";
> + };
> +
> + i2c0: i2c at 01c2ac00 {
> + compatible = "allwinner,sun4i-a10-i2c";
> + reg = <0x01c2ac00 0x400>;
> + interrupts = <7>;
> + clocks = <&apb1_gates 0>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c1: i2c at 01c2b000 {
> + compatible = "allwinner,sun4i-a10-i2c";
> + reg = <0x01c2b000 0x400>;
> + interrupts = <8>;
> + clocks = <&apb1_gates 1>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c2: i2c at 01c2b400 {
> + compatible = "allwinner,sun4i-a10-i2c";
> + reg = <0x01c2b400 0x400>;
> + interrupts = <9>;
> + clocks = <&apb1_gates 2>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + timer at 01c60000 {
> + compatible = "allwinner,sun5i-a13-hstimer";
> + reg = <0x01c60000 0x1000>;
> + interrupts = <82>, <83>;
> + clocks = <&ahb_gates 28>;
> + };
> +
> + fe0: display-frontend at 01e00000 {
> + compatible = "allwinner,sun5i-a13-display-frontend";
> + reg = <0x01e00000 0x20000>;
> + interrupts = <47>;
> + clocks = <&ahb_gates 46>, <&de_fe_clk>,
> + <&dram_gates 25>;
> + clock-names = "ahb", "mod",
> + "ram";
> + resets = <&de_fe_clk>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + fe0_out: port at 1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + fe0_out_be0: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&be0_in_fe0>;
> + };
> + };
> + };
> + };
> +
> + be0: display-backend at 01e60000 {
> + compatible = "allwinner,sun5i-a13-display-backend";
> + reg = <0x01e60000 0x10000>;
> + clocks = <&ahb_gates 44>, <&de_be_clk>,
> + <&dram_gates 26>;
> + clock-names = "ahb", "mod",
> + "ram";
> + resets = <&de_be_clk>;
> + status = "disabled";
> +
> + assigned-clocks = <&de_be_clk>;
> + assigned-clock-rates = <300000000>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + be0_in: port at 0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + be0_in_fe0: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&fe0_out_be0>;
> + };
> + };
> +
> + be0_out: port at 1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + be0_out_tcon0: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&tcon0_in_be0>;
> + };
> + };
> + };
> + };
> + };
> +};
> --
> git-series 0.8.11
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
More information about the U-Boot
mailing list