[U-Boot] [PATCH 02/11] powerpc: mpc85xx: Convert CONFIG_SYS_CCSRBAR_DEFAULT to Kconfig option
York Sun
york.sun at nxp.com
Fri Dec 2 22:37:43 CET 2016
Move default value definitions to to Kconfig SYS_CCSRBAR_DEFAULT.
Signed-off-by: York Sun <york.sun at nxp.com>
---
arch/powerpc/cpu/mpc85xx/Kconfig | 50 +++++++++++++++++++++++++++++++
arch/powerpc/include/asm/config_mpc85xx.h | 41 -------------------------
doc/README.ramboot-ppc85xx | 4 +--
3 files changed, 52 insertions(+), 43 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 9a5cd85..1d2e027 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -471,6 +471,56 @@ config MAX_CPUS
cores, count the reserved ports. This will allocate enough memory
in spin table to properly handle all cores.
+config SYS_CCSRBAR_DEFAULT
+ hex "Default CCSRBAR address"
+ default 0xff700000 if ARCH_BSC9131 || \
+ ARCH_BSC9132 || \
+ ARCH_C29X || \
+ ARCH_MPC8536 || \
+ ARCH_MPC8540 || \
+ ARCH_MPC8541 || \
+ ARCH_MPC8544 || \
+ ARCH_MPC8548 || \
+ ARCH_MPC8555 || \
+ ARCH_MPC8560 || \
+ ARCH_MPC8568 || \
+ ARCH_MPC8569 || \
+ ARCH_MPC8572 || \
+ ARCH_P1010 || \
+ ARCH_P1011 || \
+ ARCH_P1020 || \
+ ARCH_P1021 || \
+ ARCH_P1022 || \
+ ARCH_P1024 || \
+ ARCH_P1025 || \
+ ARCH_P2020
+ default 0xff600000 if ARCH_P1023
+ default 0xfe000000 if ARCH_B4420 || \
+ ARCH_B4860 || \
+ ARCH_P2041 || \
+ ARCH_P3041 || \
+ ARCH_P4080 || \
+ ARCH_P5020 || \
+ ARCH_P5040 || \
+ ARCH_T1013 || \
+ ARCH_T1014 || \
+ ARCH_T1020 || \
+ ARCH_T1022 || \
+ ARCH_T1023 || \
+ ARCH_T1024 || \
+ ARCH_T1040 || \
+ ARCH_T1042 || \
+ ARCH_T2080 || \
+ ARCH_T2081 || \
+ ARCH_T4160 || \
+ ARCH_T4240
+ default 0xe0000000 if ARCH_QEMU_E500
+ help
+ Default value of CCSRBAR comes from power-on-reset. It
+ is fixed on each SoC. Some SoCs can have different value
+ if changed by pre-boot regime. The value here must match
+ the current value in SoC. If not sure, do not change.
+
source "board/freescale/b4860qds/Kconfig"
source "board/freescale/bsc9131rdb/Kconfig"
source "board/freescale/bsc9132qds/Kconfig"
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index c92bc1e..474fd1a 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -9,10 +9,6 @@
/* SoC specific defines for Freescale MPC85xx (PQ3) and QorIQ processors */
-#ifdef CONFIG_SYS_CCSRBAR_DEFAULT
-#error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file."
-#endif
-
/*
* This macro should be removed when we no longer care about backwards
* compatibility with older operating systems.
@@ -39,27 +35,23 @@
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 1
#define CONFIG_SYS_FSL_SEC_COMPAT 2
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
#elif defined(CONFIG_ARCH_MPC8540)
#define CONFIG_SYS_FSL_NUM_LAWS 8
#define CONFIG_SYS_FSL_DDRC_GEN1
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_ARCH_MPC8541)
#define CONFIG_SYS_FSL_NUM_LAWS 8
#define CONFIG_SYS_FSL_DDRC_GEN1
#define CONFIG_SYS_FSL_SEC_COMPAT 2
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_ARCH_MPC8544)
#define CONFIG_SYS_FSL_NUM_LAWS 10
#define CONFIG_SYS_FSL_DDRC_GEN2
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 0
#define CONFIG_SYS_FSL_SEC_COMPAT 2
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_A005125
#elif defined(CONFIG_ARCH_MPC8548)
@@ -67,7 +59,6 @@
#define CONFIG_SYS_FSL_DDRC_GEN2
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 0
#define CONFIG_SYS_FSL_SEC_COMPAT 2
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
#define CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
#define CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
@@ -84,12 +75,10 @@
#define CONFIG_SYS_FSL_NUM_LAWS 8
#define CONFIG_SYS_FSL_DDRC_GEN1
#define CONFIG_SYS_FSL_SEC_COMPAT 2
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_ARCH_MPC8560)
#define CONFIG_SYS_FSL_NUM_LAWS 8
#define CONFIG_SYS_FSL_DDRC_GEN1
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_ARCH_MPC8568)
#define CONFIG_SYS_FSL_NUM_LAWS 10
@@ -98,7 +87,6 @@
#define QE_MURAM_SIZE 0x10000UL
#define MAX_QE_RISC 2
#define QE_NUM_OF_SNUM 28
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
@@ -111,7 +99,6 @@
#define QE_MURAM_SIZE 0x20000UL
#define MAX_QE_RISC 4
#define QE_NUM_OF_SNUM 46
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
@@ -124,7 +111,6 @@
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_DDR_115
#define CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
#define CONFIG_SYS_FSL_ERRATUM_A004508
@@ -140,7 +126,6 @@
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_IFC_A002769
@@ -165,7 +150,6 @@
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_A004508
@@ -177,7 +161,6 @@
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_A004508
@@ -192,7 +175,6 @@
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define QE_MURAM_SIZE 0x6000UL
@@ -208,7 +190,6 @@
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_FSL_SATA_ERRATUM_A001
@@ -227,7 +208,6 @@
#define CONFIG_SYS_BMAN_NUM_PORTALS 3
#define CONFIG_SYS_FM_MURAM_SIZE 0x10000
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff600000
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
@@ -241,7 +221,6 @@
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_A004508
@@ -255,7 +234,6 @@
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define QE_MURAM_SIZE 0x6000UL
@@ -268,7 +246,6 @@
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
@@ -295,7 +272,6 @@
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 32
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
@@ -332,7 +308,6 @@
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 32
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
@@ -374,7 +349,6 @@
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,p4080-pcie"
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_ERRATUM_CPC_A002
#define CONFIG_SYS_FSL_ERRATUM_CPC_A003
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
@@ -423,7 +397,6 @@
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 32
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
@@ -460,7 +433,6 @@
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
@@ -486,7 +458,6 @@
#define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR 0xb0000000
#define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 0xff600000
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 3
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_NAND_FSL_IFC
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_A005125
@@ -507,7 +478,6 @@
#define CONFIG_SYS_FSL_DSP_M3_RAM_ADDR 0xc0000000
#define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 0xff600000
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 3
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_NAND_FSL_IFC
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK
@@ -575,7 +545,6 @@
#define CONFIG_SYS_FSL_ERRATUM_A007186
#define CONFIG_SYS_FSL_ERRATUM_A006593
#define CONFIG_SYS_FSL_ERRATUM_A007798
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_SFP_VER_3_0
#define CONFIG_SYS_FSL_PCI_VER_3_X
@@ -618,7 +587,6 @@
#define CONFIG_SYS_FSL_ERRATUM_A006384
#define CONFIG_SYS_FSL_ERRATUM_A007212
#define CONFIG_SYS_FSL_ERRATUM_A004477
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_SFP_VER_3_0
#ifdef CONFIG_ARCH_B4860
@@ -681,7 +649,6 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
#define QE_MURAM_SIZE 0x6000UL
@@ -725,7 +692,6 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
#define QE_MURAM_SIZE 0x6000UL
@@ -778,7 +744,6 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_A007212
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_SFP_VER_3_0
#define CONFIG_SYS_FSL_ISBC_VER 2
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
@@ -799,22 +764,16 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_6
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_A005125
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 3
#define CONFIG_SYS_FSL_SEC_IDX_OFFSET 0x20000
#elif defined(CONFIG_ARCH_QEMU_E500)
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xe0000000
#else
#error Processor type not defined for this platform
#endif
-#ifndef CONFIG_SYS_CCSRBAR_DEFAULT
-#error "CONFIG_SYS_CCSRBAR_DEFAULT is not defined for this platform."
-#endif
-
#ifdef CONFIG_E6500
#define CONFIG_SYS_FSL_THREADS_PER_CORE 2
#else
diff --git a/doc/README.ramboot-ppc85xx b/doc/README.ramboot-ppc85xx
index 5cc546a..c9fef53 100644
--- a/doc/README.ramboot-ppc85xx
+++ b/doc/README.ramboot-ppc85xx
@@ -90,8 +90,8 @@ In the 2nd case bootloader has already re-located CCSRBAR to 0xffe00000
This will finally use the CONFIG_SYS_RAMBOOT.
-3. File name-> arch/powerpc/include/asm/config_mpc85xx.h
- In the section of the particular SOC, for example P1020,
+3. Change CONFIG_SYS_CCSRBAR_DEFAULT in menuconfig accordingly.
+ In the section of the particular SOC, for example P1020, pseudo code
#if defined(CONFIG_GO)
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xffe00000
--
2.7.4
More information about the U-Boot
mailing list