[U-Boot] [PATCH 03/10] arm: socfpga: arria10: Enhanced socfpga_arria10_defconfig to support SPL

[Marek Vasut]

On 12/06/2016 08:52 AM, Chee Tien Fong wrote:
> From: Tien Fong Chee <tien.fong.chee at intel.com>
> 
> Enhanced defconfig file for Arria10 to enable SPL build and supporting
> device tree build for SDMMC.
> 
> Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
> Cc: Marek Vasut <marex at denx.de>
> Cc: Dinh Nguyen <dinguyen at kernel.org>
> Cc: Chin Liang See <chin.liang.see at intel.com>
> Cc: Tien Fong <skywindctf at gmail.com>
> ---
>  arch/arm/mach-socfpga/include/mach/boot0.h |   17 +++++++++++++++++
>  configs/socfpga_arria10_defconfig          |   18 +++++++++++++-----
>  2 files changed, 30 insertions(+), 5 deletions(-)
>  create mode 100644 arch/arm/mach-socfpga/include/mach/boot0.h
> 
> diff --git a/arch/arm/mach-socfpga/include/mach/boot0.h b/arch/arm/mach-socfpga/include/mach/boot0.h
> new file mode 100644
> index 0000000..8052a0b
> --- /dev/null
> +++ b/arch/arm/mach-socfpga/include/mach/boot0.h
> @@ -0,0 +1,17 @@
> +/*
> + * Copyright (C) 2016, Intel Corporation
> + *
> + * SPDX-License-Identifier:	GPL-2.0
> + */
> +
> +#ifndef __BOOT0_H
> +#define __BOOT0_H
> +
> +#if (defined(CONFIG_ARCH_SOCFPGA) && defined(CONFIG_SPL_BUILD))
> +/* BOOT0 header information */
> +#define ARM_SOC_BOOT0_HOOK	\
> +	.fill 12, 4, 0xdeadbeef

Seems unrelated and something that was fixed in mainline already.

> +#else
> +#define ARM_SOC_BOOT0_HOOK
> +#endif
> +#endif /* __BOOT0_H */
> diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig
> index 422261b..755bb66 100644
> --- a/configs/socfpga_arria10_defconfig
> +++ b/configs/socfpga_arria10_defconfig
> @@ -3,14 +3,22 @@ CONFIG_ARCH_SOCFPGA=y
>  CONFIG_TARGET_SOCFPGA_ARRIA10=y
>  CONFIG_DM_GPIO=y
>  CONFIG_TARGET_SOCFPGA_ARRIA10_SOCDK=y
> -CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk"
> +CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk_sdmmc"
> +CONFIG_IDENT_STRING="socfpga_arria10"
>  # CONFIG_CMD_IMLS is not set
>  # CONFIG_CMD_FLASH is not set
>  CONFIG_CMD_GPIO=y
>  CONFIG_DWAPB_GPIO=y
> -CONFIG_DM_ETH=y
> -CONFIG_ETH_DESIGNWARE=y
>  CONFIG_SYS_NS16550=y
> -CONFIG_CADENCE_QSPI=y
> -CONFIG_DESIGNWARE_SPI=y
>  CONFIG_DM_MMC=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_CMD_MMC=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_SPL=y
> +CONFIG_SPL_DM=y
> +CONFIG_SPL_SIMPLE_BUS=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> +CONFIG_SPL_MMC_SUPPORT=y
> +CONFIG_SPL_SERIAL_SUPPORT=y
> +CONFIG_SPL_OF_LIBFDT=y
> +CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
> 


-- 
Best regards,
Marek Vasut