[U-Boot] Cubieboard2 uboot 2016.09.01 not supporting booting from sata

[Jagan Teki]

On Tue, Dec 20, 2016 at 2:41 PM, Robert Moskowitz <rgm at htt-consult.com> wrote:
> Dear listers,
>
> It has been over a year since I have built a new system and tried to set up
> to boot from sata.
>
> What I did in the past was to use a small mSD card with only the uboot bin
> and no partitions.
>
> All my partitions for either Fedrora25 or Centos7 are on the sata. I should
> boot up, the system sees no partitions on the mSD, it scans for other
> devices, finds the sata and proceeds from there.
>
> Something must have changed in the past year.  Or else my notes on what to
> do are incomplete.
>
> Can you help?  Here is a capture of a boot attempt with F25 on the sata:
>
>
> U-Boot SPL 2016.09.01 (Oct 19 2016 - 13:46:44)
> DRAM: 1024 MiB
> CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
> Trying to boot from MMC1
>
>
> U-Boot 2016.09.01 (Oct 19 2016 - 13:46:44 +0000) Allwinner Technology
>
> CPU:   Allwinner A20 (SUN7I)
> Model: Cubietech Cubieboard2
> I2C:   ready
> DRAM:  1 GiB
> MMC:   SUNXI SD/MMC: 0
> In:    serial
> Out:   serial
> Err:   serial
> SCSI:  Target spinup took 0 ms.
> AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
> flags: ncq stag pm led clo only pmp pio slum part ccc apst
> Net:   eth0: ethernet at 01c50000
> Hit any key to stop autoboot:  0
> ** Invalid partition 1 **
> ** Invalid partition 1 **
> ** Invalid partition 1 **
> =>

try latest master and also please give some more command log,  sata
part or similar

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.