[U-Boot] [PATCH v2 03/23] armv8: add lowlevel_init.S

[Simon Glass]

Hi Andre,

On 4 December 2016 at 18:52, Andre Przywara <andre.przywara at arm.com> wrote:
> For boards that call s_init() when the SPL runs, we are expected to
> setup an early stack before calling this C function.
> Implement the proper AArch64 version of this based on the ARMv7 code.
> This allows sunxi boards to setup the basic peripherals even on with a
> 64-bit SPL.
>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
>  arch/arm/cpu/armv8/Makefile        |  1 +
>  arch/arm/cpu/armv8/lowlevel_init.S | 44 ++++++++++++++++++++++++++++++++++++++
>  2 files changed, 45 insertions(+)
>  create mode 100644 arch/arm/cpu/armv8/lowlevel_init.S

Is this actually needed / used for anything?

Regards,
Simon