[U-Boot] [PATCH 05/10] arm: socfpga: arria10: Added support for Arria 10 SoC dev kit
Chee, Tien Fong
tien.fong.chee at intel.com
Wed Dec 7 12:21:46 CET 2016
On Sel, 2016-12-06 at 13:51 +0100, Marek Vasut wrote:
> On 12/06/2016 09:07 AM, Chee Tien Fong wrote:
> >
> > From: Tien Fong Chee <tien.fong.chee at intel.com>
> >
> > Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
> > Cc: Marek Vasut <marex at denx.de>
> > Cc: Dinh Nguyen <dinguyen at kernel.org>
> > Cc: Chin Liang See <chin.liang.see at intel.com>
> > Cc: Tien Fong <skywindctf at gmail.com>
> > ---
> > arch/arm/mach-socfpga/include/mach/base_addr_a10.h | 11 +-
> > arch/arm/mach-socfpga/system_manager.c | 4 +-
> > drivers/fpga/socfpga.c | 7 +-
> > include/configs/socfpga_arria10_socdk.h | 152
> > +++++++++++++++++--
> > 4 files changed, 151 insertions(+), 23 deletions(-)
> >
> > diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
> > b/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
> > index 902c321..487a5dc 100644
> > --- a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
> > +++ b/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
> > @@ -1,7 +1,7 @@
> > /*
> > - * Copyright (C) 2014 Altera Corporation <www.altera.com>
> > + * Copyright (C) 2014-2016 Altera Corporation <www.altera.com>
> > *
> > - * SPDX-License-Identifier: GPL-2.0+
> > + * SPDX-License-Identifier: GPL-2.0
> Can you change license this way ?
>
Okay, i will revert this change. I discussed with Chin Liang today, and
we decided to let owner to make the changes. How about the year change
2014-2016?
> >
> > */
> >
> > #ifndef _SOCFPGA_A10_BASE_HARDWARE_H_
> > @@ -35,11 +35,14 @@
> >
> > #define SOCFPGA_ECC_OCRAM_ADDRESS 0xff8c3000
> > #define SOCFPGA_UART0_ADDRESS 0xffc02000
> > -#define SOCFPGA_OSC1TIMER0_ADDRESS 0xffd00000
> > +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00000
> > +#define SOCFPGA_SYSTIMER1_ADDRESS 0xffd00100
> > #define SOCFPGA_CLKMGR_ADDRESS 0xffd04000
> > #define SOCFPGA_RSTMGR_ADDRESS 0xffd05000
> This should be in a separate patch.
>
> >
> > -#define SOCFPGA_SDR_ADDRESS 0xffcfb000
> > +#define SOCFPGA_SDR_ADDRESS
> > 0xffcfb000
> > +#define SOCFPGA_NOC_L4_PRIV_FLT_OFST 0xffd11000
> > +#define SOCFPGA_NOC_FW_H2F_SCR_OFST 0xffd13
> > 500
> > #define SOCFPGA_SDR_SCHEDULER_ADDRESS 0xffd12400
> > #define SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS 0xffd13200
> > #define SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS 0xffd13300
> > diff --git a/arch/arm/mach-socfpga/system_manager.c
> > b/arch/arm/mach-socfpga/system_manager.c
> > index 9e1c3fd..e1f0082 100644
> > --- a/arch/arm/mach-socfpga/system_manager.c
> > +++ b/arch/arm/mach-socfpga/system_manager.c
> This should also be in a separate patch, don't go hacking common code
> in
> board-support patch.
>
Okay, i will move these changes to separate patch. Those removed
#define is no longer valid.
> >
> > @@ -1,5 +1,5 @@
> > /*
> > - * Copyright (C) 2013 Altera Corporation <www.altera.com>
> > + * Copyright (C) 2013-2016 Altera Corporation <www.altera.com>
> > *
> > * SPDX-License-Identifier: GPL-2.0+
> > */
> > @@ -11,8 +11,10 @@
> >
> > DECLARE_GLOBAL_DATA_PTR;
> >
> > +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
> > static struct socfpga_system_manager *sysmgr_regs =
> > (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
> > +#endif
> >
> > /*
> > * Populate the value for SYSMGR.FPGAINTF.MODULE based on pinmux
> > setting.
> > diff --git a/drivers/fpga/socfpga.c b/drivers/fpga/socfpga.c
> > index bfefafd..7fd922e 100644
> > --- a/drivers/fpga/socfpga.c
> > +++ b/drivers/fpga/socfpga.c
> > @@ -1,5 +1,5 @@
> > /*
> > - * Copyright (C) 2012 Altera Corporation <www.altera.com>
> > + * Copyright (C) 2012-2016 Altera Corporation <www.altera.com>
> > * All rights reserved.
> > *
> > * SPDX-License-Identifier: BSD-3-Clause
> > @@ -19,8 +19,10 @@ DECLARE_GLOBAL_DATA_PTR;
> >
> > static struct socfpga_fpga_manager *fpgamgr_regs =
> > (struct socfpga_fpga_manager
> > *)SOCFPGA_FPGAMGRREGS_ADDRESS;
> > +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
> > static struct socfpga_system_manager *sysmgr_regs =
> > (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
> > +#endif
> >
> > /* Set CD ratio */
> > static void fpgamgr_set_cd_ratio(unsigned long ratio)
> > @@ -267,9 +269,10 @@ int socfpga_load(Altera_desc *desc, const void
> > *rbf_data, size_t rbf_size)
> > }
> >
> > /* Prior programming the FPGA, all bridges need to be shut
> > off */
> > -
> > +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
> > /* Disable all signals from hps peripheral controller to
> > fpga */
> > writel(0, &sysmgr_regs->fpgaintfgrp_module);
> > +#endif
> >
> > /* Disable all signals from FPGA to HPS SDRAM */
> > #define SDR_CTRLGRP_FPGAPORTRST_ADDRESS 0x5080
> > diff --git a/include/configs/socfpga_arria10_socdk.h
> > b/include/configs/socfpga_arria10_socdk.h
> > index 577f60f..15c7a28 100644
> > --- a/include/configs/socfpga_arria10_socdk.h
> > +++ b/include/configs/socfpga_arria10_socdk.h
> > @@ -1,5 +1,5 @@
> > /*
> > - * Copyright (C) 2015 Altera Corporation <www.altera.com>
> > + * Copyright (C) 2015-2016 Altera Corporation <www.altera.com>
> > *
> > * SPDX-License-Identifier: GPL-2.0
> > */
> > @@ -16,36 +16,67 @@
> >
> > #define CONFIG_CMD_ASKENV
> > #define CONFIG_CMD_BOOTZ
> > -#define CONFIG_CMD_CACHE
> > -#define CONFIG_CMD_DHCP
> > #define CONFIG_CMD_EXT4
> > #define CONFIG_CMD_EXT4_WRITE
> > -#define CONFIG_CMD_FAT
> > -#define CONFIG_CMD_FS_GENERIC
> > #define CONFIG_CMD_GREPENV
> > -#define CONFIG_CMD_MMC
> > #define CONFIG_CMD_PING
> >
> > -/*
> > - * Memory configurations
> > - */
> > -#define PHYS_SDRAM_1_SIZE 0x2000000
> > -
> > /* Booting Linux */
> > -#define CONFIG_BOOTDELAY 3
> > #define CONFIG_BOOTFILE "zImage"
> > #define CONFIG_BOOTARGS "console=ttyS0,"
> > __stringify(CONFIG_BAUDRATE)
> > #define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot"
> > -#define CONFIG_LOADADDR 0x01000000
> > +#define CONFIG_LOADADDR 0x8000
> > #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> >
> > /*
> > + * U-Boot general configurations
> > + */
> > +/* Base address for .text section. */
> > +/* Ensure located start of HPS OCRAM */
> > +#define CONFIG_SYS_TEXT_BASE 0xFFE00000
> > +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
> > +
> > +/* Cache options */
> > +#define CONFIG_SYS_DCACHE_OFF
> > +#define CONFIG_CMD_CACHE
> > +#define CONFIG_SYS_L2_PL310
> > +#define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS
> > +
> > +/*
> > + * U-Boot console configurations
> > + */
> > +#define CONFIG_SYS_MAXARGS 64
> > +#define CONFIG_SYS_CBSIZE 2048
> > +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
> > + sizeof(CONFIG_SYS_PROMPT) +
> > 16)
> > +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
> > +#define CONFIG_SYS_LONGHELP
> > +#define CONFIG_AUTO_COMPLETE
> > +#define CONFIG_DOS_PARTITION
> > +
> > +/* U-Boot run time memory configurations */
> > +#define CONFIG_SYS_INIT_RAM_ADDR 0xFFE00000
> > +#define CONFIG_SYS_INIT_RAM_SIZE 0x40000
> > +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR \
> > + + CONFIG_SYS_INIT_RAM_SIZE)
> > +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_SP_ADDR)
> > +#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
> > +
> > +/*
> > * Display CPU and Board Info
> > */
> > #define CONFIG_DISPLAY_CPUINFO
> > #define CONFIG_DISPLAY_BOARDINFO
> > #define CONFIG_DISPLAY_BOARDINFO_LATE
> >
> > +/*
> > + * U-Boot environment configurations
> > + */
> > +#define CONFIG_ENV_IS_NOWHERE 1
> > +#ifndef CONFIG_ENV_SIZE
> > +#define CONFIG_ENV_SIZE 4096
> > +#endif
> > +
> > /* Ethernet on SoC (EMAC) */
> > #if defined(CONFIG_CMD_NET)
> >
> > @@ -55,7 +86,7 @@
> >
> > #endif
> >
> > -#define CONFIG_ENV_IS_IN_MMC
> > +#undef CONFIG_ENV_IS_IN_MMC
> > #define CONFIG_SYS_MMC_ENV_DEV 0/* device 0 */
> > #define CONFIG_ENV_OFFSET 512/* just after the MBR
> > */
> >
> > @@ -89,6 +120,95 @@
> > " root=${qspiroot} rw
> > rootfstype=${qspirootfstype};"\
> > "bootm ${loadaddr} - ${fdt_addr}\0"
> >
> > -/* The rest of the configuration is shared */
> > -#include <configs/socfpga_common.h>
> > +/*
> > + * External memory configurations
> > + */
> Why is this being duplicated in board support code when it previously
> was in common code ? That's just wrong.
>
I found that many conflicts between the board support code and common
code. It is safe for Arria10 having its own setting here. What do you
think?
> >
> > +#define PHYS_SDRAM_1 0x0
> > +#define PHYS_SDRAM_1_SIZE 0x80000000
> > +#define CONFIG_SYS_SDRAM_BASE 0
> > +#define CONFIG_NR_DRAM_BANKS 1
> > +#define CONFIG_SYS_MEMTEST_START 0
> > +#define CONFIG_SYS_MEMTEST_END 0x100000
> > +
> > +/*
> > + * Serial / UART configurations
> > + */
> > +#define CONFIG_SYS_NS16550_SERIAL
> > +#define CONFIG_SYS_NS16550_MEM32
> > +#define CONFIG_SYS_NS16550_REG_SIZE -4
> > +#define CONFIG_SYS_NS16550_COM1 SOCFPGA_UART1_ADDRESS
> > +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400,
> > 57600, 115200}
> > +#define CONFIG_SYS_NS16550_CLK (50000000)
> > +#define CONFIG_CONS_INDEX 1
> > +#define CONFIG_BAUDRATE 115200
> > +
> > +/*
> > + * L4 OSC1 Timer 0
> > + */
> > +/* This timer use eosc1 where the clock frequency is fixed
> > + * throughout any condition */
> > +#define CONFIG_SYS_TIMERBASE SOCFPGA_SYSTIMER0_ADDR
> > ESS
> > +/* address of timer counter value */
> > +#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE +
> > 0x4)
> > +/* reload value when timer count to zero */
> > +#define TIMER_LOAD_VAL 0xFFFFFFFF
> > +/* Clocks source frequency to timer */
> > +#define CONFIG_SYS_TIMER_RATE (25000000)
> > +
> > +/* DesignWare timer is a countdown timer */
> > +#define CONFIG_SYS_TIMER_COUNTS_DOWN
> > +
> > +/*
> > + * L4 Watchdog configurations
> > + */
> > +#ifdef CONFIG_HW_WATCHDOG
> > +#define CONFIG_DESIGNWARE_WATCHDOG
> > +#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
> > +#define CONFIG_HPS_CLK_OSC1_HZ 25000000
> > +#define CONFIG_DW_WDT_CLOCK_KHZ (CONFIG_HPS_CLK_OSC
> > 1_HZ / 1000)
> > +#define CONFIG_HW_WATCHDOG_TIMEOUT_MS (2000)
> > +#endif
> > +
> > +/*
> > + * SDMMC configurations
> > + */
> > +#ifdef CONFIG_CMD_MMC
> > +#define CONFIG_MMC
> > +#define CONFIG_BOUNCE_BUFFER
> > +#define CONFIG_GENERIC_MMC
> > +#define CONFIG_DWMMC
> > +#define CONFIG_SOCFPGA_DWMMC
> > +#define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH 1024
> > +#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256
> > +#endif
> > +
> > +/*
> > + * Flash configurations
> > + */
> > +#define CONFIG_SYS_MAX_FLASH_BANKS 1
> > +#define CONFIG_SYS_NO_FLASH
> > +
> > +/* SPL configuration */
> > +#define CONFIG_SPL_FRAMEWORK
> > +#define CONFIG_SPL_RAM_DEVICE
> > +#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_AD
> > DR
> > +#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT
> > _RAM_SIZE
> > +
> > +#ifdef CONFIG_SPL_BUILD
> > +#define CONFIG_SYS_MALLOC_SIMPLE
> > +#endif
> > +
> > +#ifdef CONFIG_SPL_NAND_DENALI
> > +#define CONFIG_SPL_NAND_SUPPORT
> > +#endif
> > +
> > +/*
> > + * Stack setup
> > + */
> > +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP
> > _ADDR
> > +
> > +/* SPL SDMMC boot support */
> > +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
> > +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-
> > dtb.img"
> > +
> > #endif /* __CONFIG_H */
> >
>
More information about the U-Boot
mailing list