[U-Boot] [PATCH 0/7] arm64: mvebu: Add support for A8K community board
kostap at marvell.com
kostap at marvell.com
Mon Dec 19 16:14:42 CET 2016
From: Konstantin Porotchkin <kostap at marvell.com>
This patch series adds initil support for A8K community board
MACCHIATOBin manufactured by SolidRun.
It should be applied on top of Stefan Roese patches adding support
for SD/eMMC devices on Marvell A37x0/A80x0/A70x0 SoCs.
The top level patch is called:
"arm64: mvebu: Enable SDHCI/MMC support for the db-88f7040/8040"
The default board DTS file is based on the original work of Rabeeh
Khory from SolidRun.
Konstantin Porotchkin (6):
arm64: mvebu: Update bubt command MMC block device access
arm64: mvebu: gpio: Add GPIO nodes to A8K family devices
arm64: mvebu: dts: Add i2c1 pin definitions to CPM
mvebu: usb: xhci: Add support for VBUS controlled by GPIO
mvebu: pcie: Add support for GPIO reset for PCIe device
arm64: mvebu: Add default configuraton for MACCHIATOBin board
Rabeeh Khoury (1):
arm64: mvebu: dts: Add DTS file for MACCHIATOBin board
arch/arm/dts/Makefile | 1 +
arch/arm/dts/armada-7040.dtsi | 1 +
arch/arm/dts/armada-8040-mcbin.dts | 253 ++++++++++++++++++++++
arch/arm/dts/armada-8040.dtsi | 1 +
arch/arm/dts/armada-ap806.dtsi | 8 +
arch/arm/dts/armada-cp110-master.dtsi | 22 ++
arch/arm/dts/armada-cp110-slave.dtsi | 18 ++
board/Marvell/mvebu_armada-8k/board.c | 54 ++++-
board/Marvell/mvebu_db-88f3720/board.c | 2 +-
cmd/mvebu/bubt.c | 17 +-
configs/mvebu_mcbin-88f8040_defconfig | 65 ++++++
doc/device-tree-bindings/pci/armada8k-pcie.txt | 49 +++++
doc/device-tree-bindings/usb/marvell.xhci-usb.txt | 29 +++
drivers/pci/pcie_dw_mvebu.c | 11 +
drivers/usb/host/xhci-mvebu.c | 5 +-
15 files changed, 518 insertions(+), 18 deletions(-)
create mode 100644 arch/arm/dts/armada-8040-mcbin.dts
create mode 100644 configs/mvebu_mcbin-88f8040_defconfig
create mode 100644 doc/device-tree-bindings/pci/armada8k-pcie.txt
create mode 100644 doc/device-tree-bindings/usb/marvell.xhci-usb.txt
--
2.7.4
More information about the U-Boot
mailing list