[U-Boot] [PATCH 2/2] armv8: ls1043a: dts: Fix the ranges table of IFC node

[Zhiqiang Hou]

From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>

Corrected the ranges table of the IFC node.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
---
 arch/arm/dts/fsl-ls1043a-qds.dtsi | 12 ++++++------
 arch/arm/dts/fsl-ls1043a-rdb.dts  |  4 ++--
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/dts/fsl-ls1043a-qds.dtsi b/arch/arm/dts/fsl-ls1043a-qds.dtsi
index 2e9f1f9..2101172 100644
--- a/arch/arm/dts/fsl-ls1043a-qds.dtsi
+++ b/arch/arm/dts/fsl-ls1043a-qds.dtsi
@@ -135,8 +135,8 @@
 	#size-cells = <1>;
 	/* NOR, NAND Flashes and FPGA on board */
 	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
-		  0x2 0x0 0x0 0x7e800000 0x00010000
-		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
 	nor at 0,0 {
@@ -148,21 +148,21 @@
 		device-width = <1>;
 	};
 
-	nand at 2,0 {
+	nand at 1,0 {
 		compatible = "fsl,ifc-nand";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x1 0x0 0x10000>;
 	};
 
-	fpga: board-control at 3,0 {
+	fpga: board-control at 2,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		reg = <0x3 0x0 0x0000100>;
+		reg = <0x2 0x0 0x0000100>;
 		bank-width = <1>;
 		device-width = <1>;
-		ranges = <0 3 0 0x100>;
+		ranges = <0 2 0 0x100>;
 	};
 };
 
diff --git a/arch/arm/dts/fsl-ls1043a-rdb.dts b/arch/arm/dts/fsl-ls1043a-rdb.dts
index 5744075..f271e71 100644
--- a/arch/arm/dts/fsl-ls1043a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1043a-rdb.dts
@@ -69,8 +69,8 @@
 	#size-cells = <1>;
 	/* NOR, NAND Flashes and FPGA on board */
 	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
-		  0x2 0x0 0x0 0x7e800000 0x00010000
-		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
 
 		nor at 0,0 {
 			compatible = "cfi-flash";
-- 
2.1.0.27.g96db324