[U-Boot] [PATCH v2 0/6] arm64: mvebu: Armada-8K family patches

[kostap at marvell.com]

From: Konstantin Porotchkin <kostap at marvell.com>

This set of patches is adding more features for bards based on new
Marvell MoChi platforms - Armada-70x0 and Armada-80x0.
The patches were applied on top of Stefan's mvebu-related patch set v2
with the last patch named 
"dm: core: Add dev_get_addr_size_index() to retrieve addr and size".

The test was done on Armada-70x0 and Armada-80x0 development boards
equipped with SoC release A1.
Since the SPI and I2C channels mapping between A0 and A1 releases
were changed, the execution of added features on A0 boards will fail.

Currently 2 major features were added:
- BUBT command support
- Pin controller driver for A8K family

Changes for v2:
- 7040-db: remove i2c0 and spi0 entries from AP (MPPs are reserved for SDIO)
- Add "bubt" documentation
- Fix code syntax
- Fix the pin controller driver code following Simon's review
- Added MPP functions documentation for CP110 and APN806
- Remove Gerrit Change ID from all patches
- Fix wrong pin function values in A8K DTS files
- Add missing cpm_i2c0 node to armada-7040-db.dts

Konstantin Porotchkin (6):
  arm64: mvebu: Modify the A8K SPI and I2C config in DTS
  arm64: mvebu: Add bubt command for flash image burn
  arm64: mvebu: pinctrl: Add pin control driver for A8K family
  arm64: mvebu: Add pin control nodes to A8K family DTS files
  arm64: mvebu: Enable BUBT command support in A8K default config
  arm64: mvebu: Enable pin control support in A8K default config

 arch/arm/dts/armada-7040-db.dts                    |  64 +-
 arch/arm/dts/armada-8040-db.dts                    | 114 +++-
 arch/arm/dts/armada-ap806.dtsi                     |  18 +
 arch/arm/dts/armada-cp110-master.dtsi              |  32 +
 arch/arm/dts/armada-cp110-slave.dtsi               |  19 +
 arch/arm/include/asm/arch-armada8k/soc-info.h      |  17 +
 arch/arm/mach-mvebu/Kconfig                        |  34 +
 cmd/Kconfig                                        |   3 +
 cmd/Makefile                                       |   2 +
 cmd/mvebu/Kconfig                                  |  10 +
 cmd/mvebu/Makefile                                 |   8 +
 cmd/mvebu/bubt.c                                   | 726 +++++++++++++++++++++
 configs/mvebu_db-88f7040_defconfig                 |   2 +
 configs/mvebu_db-88f8040_defconfig                 |   2 +
 .../pinctrl/marvell,armada-apn806-pinctrl.txt      |  25 +
 .../pinctrl/marvell,armada-cp110-pinctrl.txt       | 270 ++++++++
 .../pinctrl/marvell,mvebu-pinctrl.txt              | 113 ++++
 doc/mvebu/cmd/bubt.txt                             |  64 ++
 drivers/pinctrl/Kconfig                            |   1 +
 drivers/pinctrl/Makefile                           |   1 +
 drivers/pinctrl/mvebu/Kconfig                      |   7 +
 drivers/pinctrl/mvebu/Makefile                     |   7 +
 drivers/pinctrl/mvebu/pinctrl-mvebu.c              | 179 +++++
 drivers/pinctrl/mvebu/pinctrl-mvebu.h              |  31 +
 24 files changed, 1685 insertions(+), 64 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-armada8k/soc-info.h
 create mode 100644 cmd/mvebu/Kconfig
 create mode 100644 cmd/mvebu/Makefile
 create mode 100644 cmd/mvebu/bubt.c
 create mode 100644 doc/device-tree-bindings/pinctrl/marvell,armada-apn806-pinctrl.txt
 create mode 100644 doc/device-tree-bindings/pinctrl/marvell,armada-cp110-pinctrl.txt
 create mode 100644 doc/device-tree-bindings/pinctrl/marvell,mvebu-pinctrl.txt
 create mode 100644 doc/mvebu/cmd/bubt.txt
 create mode 100644 drivers/pinctrl/mvebu/Kconfig
 create mode 100644 drivers/pinctrl/mvebu/Makefile
 create mode 100644 drivers/pinctrl/mvebu/pinctrl-mvebu.c
 create mode 100644 drivers/pinctrl/mvebu/pinctrl-mvebu.h

-- 
2.7.4