[U-Boot] [PATCH] sunxi: enable H3 EMAC for the nanopi neo
Jelle van der Waa
jelle at vdwaa.nl
Mon Dec 5 19:47:21 CET 2016
The nanopi already had the CONFIG_SUN8I_EMAC=y enabled in it's defconfig
file, but was missing the &emac the device tree entry.
Signed-off-by: Jelle van der Waa <jelle at vdwaa.nl>
---
arch/arm/dts/sun8i-h3-nanopi-neo.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/dts/sun8i-h3-nanopi-neo.dts
index 3d64caf..096ff0b 100644
--- a/arch/arm/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/dts/sun8i-h3-nanopi-neo.dts
@@ -123,3 +123,14 @@
/* USB VBUS is always on */
status = "okay";
};
+
+&emac {
+ phy = <&phy1>;
+ phy-mode = "mii";
+ allwinner,use-internal-phy;
+ allwinner,leds-active-low;
+ status = "okay";
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
--
2.10.2
More information about the U-Boot
mailing list