[U-Boot] [PATCH 2/2] sunxi: add support for Lichee Pi One device

[Icenowy Zheng]

Lichee Pi One is a low-cost Allwinner A13 based development board, with
two SD slots, a USB2.0 OTG port, a USB2.0 host port (or onboard Wi-Fi
card), optional headers for LCD and CSI and two GPIO headers.

Add support for this board.

Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
---
 configs/LicheePi_One_defconfig | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 configs/LicheePi_One_defconfig

diff --git a/configs/LicheePi_One_defconfig b/configs/LicheePi_One_defconfig
new file mode 100644
index 0000000000..ba8894c9ce
--- /dev/null
+++ b/configs/LicheePi_One_defconfig
@@ -0,0 +1,26 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_MACH_SUN5I=y
+CONFIG_DRAM_CLK=408
+CONFIG_DRAM_MBUS_CLK=204
+CONFIG_DRAM_ZQ=121
+CONFIG_DRAM_ODT_EN=y
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_USB0_VBUS_PIN="PC12"
+CONFIG_USB0_VBUS_DET="PG1"
+CONFIG_USB0_ID_DET="PG2"
+CONFIG_AXP_GPIO=y
+# CONFIG_VIDEO is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-licheepi-one"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
+CONFIG_CONSOLE_MUX=y
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_AXP_ALDO3_VOLT=1800
+CONFIG_AXP_ALDO4_VOLT=2800
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_HOST=y
-- 
2.11.0