[U-Boot] [PATCH v4 00/16] imx6: Add Engicam GEAM6UL/i.CoreM6 RQS board support

[Stefano Babic]

On 16/12/2016 17:08, Jagan Teki wrote:
> On Fri, Dec 16, 2016 at 5:00 PM, Jagan Teki <jagan at openedev.com> wrote:
>> Hi Stefano,
>>
>> Did you apply on top this series [1], can you confirm?
>>
>> [1] [PATCH v3 00/13] imx6: icorem6: Add dm-eth, framebuffer and I2C support
> 
> Look like you have not applied above before applying this series, we
> had a discussion about this long back. Please see the thread[1] for
> more info and also please noted the same in cover-letter as well.


That's true, I apply on the top of [1], I have still some issues with
your boards:


       arm:  +   imx6q_icore_mmc
+drivers/built-in.o: In function `cfg_video_init':
+drivers/video/cfb_console.c:2011: undefined reference to `video_hw_init'
+arm-linux-gnueabi-ld.bfd: BFD (GNU Binutils) 2.22 assertion fail
/opt/eldk/build/eldk-rel-v5.2-2012-06-20-33c5d31-armv5te/tmp/work/i686-nativesdk-eldk-linux/binutils-cross-canadian-arm-2.22-r2/binutils-2.22/bfd/elf32-arm.c:7498
+arm-linux-gnueabi-ld.bfd: BFD (GNU Binutils) 2.22 assertion fail
/opt/eldk/build/eldk-rel-v5.2-2012-06-20-33c5d31-armv5te/tmp/work/i686-nativesdk-eldk-linux/binutils-cross-canadian-arm-2.22-r2/binutils-2.22/bfd/elf32-arm.c:13830
+make[1]: *** [u-boot] Error 139
+make: *** [sub-make] Error 2
       arm:  +   imx6q_icore_nand
+drivers/built-in.o: In function `cfg_video_init':
+drivers/video/cfb_console.c:2011: undefined reference to `video_hw_init'
+arm-linux-gnueabi-ld.bfd: BFD (GNU Binutils) 2.22 assertion fail
/opt/eldk/build/eldk-rel-v5.2-2012-06-20-33c5d31-armv5te/tmp/work/i686-nativesdk-eldk-linux/binutils-cross-canadian-arm-2.22-r2/binutils-2.22/bfd/elf32-arm.c:7498
+arm-linux-gnueabi-ld.bfd: BFD (GNU Binutils) 2.22 assertion fail
/opt/eldk/build/eldk-rel-v5.2-2012-06-20-33c5d31-armv5te/tmp/work/i686-nativesdk-eldk-linux/binutils-cross-canadian-arm-2.22-r2/binutils-2.22/bfd/elf32-arm.c:13830
+make[1]: *** [u-boot] Error 139
+make: *** [sub-make] Error 2
    4    0    2 /6      0:00:20  : imx6dl_icore_mmc


Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================