[U-Boot] [PATCH V2 1/3] usb: ehci-mx6: implement ofdata_to_platdata

Marek Vasut marex at denx.de
Thu Dec 22 10:18:53 CET 2016


On 12/22/2016 10:06 AM, Peng Fan wrote:
> Implement ofdata_to_platdata to set the type to host or device.
>  - Check "dr-mode" property.
>  - If there is no "dr-mode", check phy_ctrl for i.MX6
>    and phy_status for i.MX7
> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> Cc: Marek Vasut <marex at denx.de>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
> 
> V2:
>   Add a ehci_usb_phy_mode function to check phy mode when dr-mode is otg,
>   or no mode property provided.
> 
>  drivers/usb/host/ehci-mx6.c | 75 +++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 75 insertions(+)
> 
> diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
> index 48889c1..18b7fc3 100644
> --- a/drivers/usb/host/ehci-mx6.c
> +++ b/drivers/usb/host/ehci-mx6.c
> @@ -15,10 +15,13 @@
>  #include <asm/arch/imx-regs.h>
>  #include <asm/arch/clock.h>
>  #include <asm/imx-common/iomux-v3.h>
> +#include <asm/imx-common/sys_proto.h>
>  #include <dm.h>
>  
>  #include "ehci.h"
>  
> +DECLARE_GLOBAL_DATA_PTR;
> +
>  #define USB_OTGREGS_OFFSET	0x000
>  #define USB_H1REGS_OFFSET	0x200
>  #define USB_H2REGS_OFFSET	0x400
> @@ -48,6 +51,7 @@
>  #define ANADIG_USB2_PLL_480_CTRL_EN_USB_CLKS	0x00000040
>  
>  #define USBNC_OFFSET		0x200
> +#define USBNC_PHY_STATUS_OFFSET	0x23C
>  #define USBNC_PHYSTATUS_ID_DIG	(1 << 4) /* otg_id status */
>  #define USBNC_PHYCFG2_ACAENB	(1 << 4) /* otg_id detection enable */
>  #define UCTRL_PWR_POL		(1 << 9) /* OTG Polarity of Power Pin */
> @@ -417,6 +421,76 @@ static const struct ehci_ops mx6_ehci_ops = {
>  	.init_after_reset = mx6_init_after_reset
>  };
>  
> +static int ehci_usb_phy_mode(struct udevice *dev)
> +{
> +	struct usb_platdata *plat = dev_get_platdata(dev);
> +	void *__iomem addr = (void *__iomem)dev_get_addr(dev);
> +	void *__iomem phy_ctrl, *__iomem phy_status;
> +	const void *blob = gd->fdt_blob;
> +	int offset = dev->of_offset, phy_off;
> +	u32 val;
> +
> +	/*
> +	 * About fsl,usbphy, Refer to
> +	 * Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt.
> +	 */
> +	if (is_mx6()) {
> +		phy_off = fdtdec_lookup_phandle(blob,
> +						offset,
> +						"fsl,usbphy");

This could be on a single line IMO.

> +		if (phy_off < 0)
> +			return -EINVAL;
> +
> +		addr = (void __iomem *)fdtdec_get_addr(blob, phy_off,
> +						       "reg");

Same here, shouldn't be over 80.

Otherwise:
Acked-by: Marek Vasut <marex at denx.de>

> +		if ((fdt_addr_t)addr == FDT_ADDR_T_NONE)
> +			return -EINVAL;
> +
> +		phy_ctrl = (void __iomem *)(addr + USBPHY_CTRL);
> +		val = readl(phy_ctrl);
> +
> +		if (val & USBPHY_CTRL_OTG_ID)
> +			plat->init_type = USB_INIT_DEVICE;
> +		else
> +			plat->init_type = USB_INIT_HOST;
> +	} else if (is_mx7()) {
> +		phy_status = (void __iomem *)(addr +
> +					      USBNC_PHY_STATUS_OFFSET);
> +		val = readl(phy_status);
> +
> +		if (val & USBNC_PHYSTATUS_ID_DIG)
> +			plat->init_type = USB_INIT_DEVICE;
> +		else
> +			plat->init_type = USB_INIT_HOST;
> +	} else {
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
> +{
> +	struct usb_platdata *plat = dev_get_platdata(dev);
> +	const char *mode;
> +
> +	mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "dr_mode", NULL);
> +	if (mode) {
> +		if (strcmp(mode, "peripheral") == 0)
> +			plat->init_type = USB_INIT_DEVICE;
> +		else if (strcmp(mode, "host") == 0)
> +			plat->init_type = USB_INIT_HOST;
> +		else if (strcmp(mode, "otg") == 0)
> +			return ehci_usb_phy_mode(dev);
> +		else
> +			return -EINVAL;
> +
> +		return 0;
> +	}
> +
> +	return ehci_usb_phy_mode(dev);
> +}
> +
>  static int ehci_usb_probe(struct udevice *dev)
>  {
>  	struct usb_platdata *plat = dev_get_platdata(dev);
> @@ -460,6 +534,7 @@ U_BOOT_DRIVER(usb_mx6) = {
>  	.name	= "ehci_mx6",
>  	.id	= UCLASS_USB,
>  	.of_match = mx6_usb_ids,
> +	.ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
>  	.probe	= ehci_usb_probe,
>  	.remove = ehci_deregister,
>  	.ops	= &ehci_usb_ops,
> 


-- 
Best regards,
Marek Vasut


More information about the U-Boot mailing list