[U-Boot] Targets for BeagleBones

[Peter Robinson]

On Tue, Dec 27, 2016 at 8:00 AM, Kristian Amlie
<kristian.amlie at mender.io> wrote:
> Nobody knows?
>
> To put it differently: If you were building for Beaglebone White, which
> target would you use?

In Fedora we use am335x_boneblack for all BBones. I've tested on
black/white/green, have a BBone Air too but not had time to test it
yet. So it should likely be renamed to something more generic but it
should work for you on any.

Peter

> --
> Kristian
>
> On 20/12/16 09:09, Kristian Amlie wrote:
>> I assume that the most appropriate configuration target for BeagleBone
>> Black is am335x_boneblack_config. But what about BeagleBone White? Up
>> until now we've been using am335x_evm_config, but are considering
>> switching to the former.
>>
>> This discussion started after the commit 80b24fcd3 in U-Boot broke some
>> MMC compatibility on the BeagleBone Black (specifically, accessing the
>> internal MMC when holding the button to boot from external MMC). This
>> was due to the addition of the CONFIG_DM_MMC option. Since this still
>> works with the am335_boneblack_config target, we're considering the
>> switch for both boards.
>>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot