[U-Boot] [PATCH v3 1/6] arm64: mvebu: Modify the A8K SPI and I2C config in DTS

[Stefan Roese]

On 08.12.2016 11:22, kostap at marvell.com wrote:
> From: Konstantin Porotchkin <kostap at marvell.com>
>
> Align the Armada-8040-db and Armada-7040-db SPI and I2C
> DTS settings with latest DB settings:
> - 8040-db: disable i2c0 and spi0 on AP (MPPs are reserved for SDIO)
> - 8040-db: disable cps_i2c0 on CP1
> - 8040-db: enable spi1 on CP1 (the new location of the boot flash)
>   The spi1 on CP1 is aliased as spi0 since this is the way
>   the driver enumerates it.
>
> Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
> Reviewed-by: Stefan Roese <sr at denx.de>
> Cc: Stefan Roese <sr at denx.de>
> Cc: Nadav Haklai <nadavh at marvell.com>
> Cc: Neta Zur Hershkovits <neta at marvell.com>
> Cc: Omri Itach <omrii at marvell.com>
> Cc: Igal Liberman <igall at marvell.com>
> Cc: Haim Boot <hayim at marvell.com>
> Cc: Hanna Hawa <hannah at marvell.com>

Patchset applied to u-boot-marvell/master.

Thanks,
Stefan