[U-Boot] [PATCH 0/3] dm: goni: support the DM PMIC

[Minkyu Kang]

2016년 12월 22일 (목) 07:03, Jaehoon Chung <jh80.chung at samsung.com>님이 작성:

> Hi,
>
>
>
> On 12/21/2016 11:54 PM, Minkyu Kang wrote:
>
> > Hi,
>
> >
>
> > On 15 December 2016 at 18:21, Jaehoon Chung <jh80.chung at samsung.com>
> wrote:
>
> >
>
> >> This patchest is for supporting pmic driver-model on Goni board.
>
> >> (Goni board is S5PC110.)
>
> >>
>
> >> For using that, add the new file as max8998.c for only driver-model.
>
> >> pmic_max8998.c is remained for legacy.
>
> >> In future, it might be removed. Instead, max8998 should be used.
>
> >>
>
> >> *dm tree
>
> >>  serial      [ + ]    |-- serial at e2900800
>
> >>  i2c         [   ]    `-- i2c-pmic
>
> >>  pmic        [   ]        `-- pmic at 66
>
> >>
>
> >> *dm uclass
>
> >> uclass 20: i2c
>
> >> - * i2c-pmic @ 47f6c6d0, seq 3, (req 3)
>
> >>
>
> >> uclass 22: i2c_generic
>
> >> uclass 42: pmic
>
> >> - * pmic at 66 @ 47f6c748, seq 0, (req -1)
>
> >>
>
> >> * After using pmic command.
>
> >> Goni # pmic list
>
> >> | Name                            | Parent name         | Parent uclass
> @
>
> >> seq
>
> >> | pmic at 66                         | i2c-pmic            | i2c @ 3
>
> >>
>
> >> Node, it needs to implement the regulator driver for using regulator
>
> >> framework.
>
> >>
>
> >> Jaehoon Chung (3):
>
> >>   power: pmic: add the max8998 controller for DM
>
> >>   arm: dts: s5pc1xx-goni: add the pmic node for using DM
>
> >>   configs: enable the DM_PMIC and DM_I2C_GPIO for max8998 pmic
>
> >>
>
> >>  arch/arm/dts/s5pc1xx-goni.dts | 165 ++++++++++++++++++++++++++++++
>
> >> ++++++++++++
>
> >>  configs/s5p_goni_defconfig    |   3 +
>
> >>  drivers/power/pmic/Kconfig    |   7 ++
>
> >>  drivers/power/pmic/Makefile   |   1 +
>
> >>  drivers/power/pmic/max8998.c  |  61 ++++++++++++++++
>
> >>  5 files changed, 237 insertions(+)
>
> >>  create mode 100644 drivers/power/pmic/max8998.c
>
> >>
>
> >> --
>
> >> 2.10.2
>
> >>
>
> >> _______________________________________________
>
> >> U-Boot mailing list
>
> >> U-Boot at lists.denx.de
>
> >> http://lists.denx.de/mailman/listinfo/u-boot
>
> >>
>
> >
>
> >
>
> > This patchset seems to ready to submit.
>
> > Who will pick this up? power? DM? or samsang?
>
>
>
> Delegated to you (Minkyu), Could you apply on u-boot-samsung?
>
> There is no Power maintainer, now.
>
> I sent the patch for updating Power maintainer, but i didn't reply
> anything.
>
>
>
> Best Regards,
>
> Jaehoon Chung
>
>
>
> >
>
> >
>
> > Thanks,
>
> >


> applied to u-boot-samsung


> Thanks

Minkyu Kang.
>
>
>
> --
Thanks. Minkyu Kang.