[U-Boot] [PATCHv5 03/17] dm: pci: remove pci_bus_to_hose(0) calling

Zhiqiang Hou Zhiqiang.Hou at nxp.com
Tue Dec 13 07:54:10 CET 2016


From: Minghuan Lian <Minghuan.Lian at nxp.com>

There may be multiple PCIe controllers in a SoC.
It is not correct that always calling pci_bus_to_hose(0) to get
the first PCIe controller for the PCIe device connected other
controllers. We just remove this calling because hose always point
the correct PCIe controller.

Signed-off-by: Minghuan Lian <Minghuan.Lian at nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---
V5:
 - No change

 drivers/pci/pci_common.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/pci_common.c b/drivers/pci/pci_common.c
index 1755914..6526de8 100644
--- a/drivers/pci/pci_common.c
+++ b/drivers/pci/pci_common.c
@@ -181,11 +181,6 @@ phys_addr_t pci_hose_bus_to_phys(struct pci_controller *hose,
 		return phys_addr;
 	}
 
-#ifdef CONFIG_DM_PCI
-	/* The root controller has the region information */
-	hose = pci_bus_to_hose(0);
-#endif
-
 	/*
 	 * if PCI_REGION_MEM is set we do a two pass search with preference
 	 * on matches that don't have PCI_REGION_SYS_MEMORY set
@@ -236,6 +231,13 @@ int __pci_hose_phys_to_bus(struct pci_controller *hose,
 	return 1;
 }
 
+/*
+ * pci_hose_phys_to_bus(): Convert physical address to bus address
+ * @hose:	PCI hose of the root PCI controller
+ * @phys_addr:	physical address to convert
+ * @flags:	flags of pci regions
+ * @return bus address if OK, 0 on error
+ */
 pci_addr_t pci_hose_phys_to_bus(struct pci_controller *hose,
 				phys_addr_t phys_addr,
 				unsigned long flags)
@@ -248,11 +250,6 @@ pci_addr_t pci_hose_phys_to_bus(struct pci_controller *hose,
 		return bus_addr;
 	}
 
-#ifdef CONFIG_DM_PCI
-	/* The root controller has the region information */
-	hose = pci_bus_to_hose(0);
-#endif
-
 	/*
 	 * if PCI_REGION_MEM is set we do a two pass search with preference
 	 * on matches that don't have PCI_REGION_SYS_MEMORY set
-- 
2.1.0.27.g96db324



More information about the U-Boot mailing list