[U-Boot] [PATCH 03/23] spi: ich: Change PCHV_ to ICHV_
Bin Meng
bmeng.cn at gmail.com
Mon Feb 1 10:40:38 CET 2016
The ICH SPI controller supports two variants, one of which is ICH7
compatible and the other is ICH9 compatible. Change 'pch_version'
to 'ich_version' to better match its original name.
Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---
drivers/spi/ich.c | 14 +++++++-------
drivers/spi/ich.h | 7 ++++++-
2 files changed, 13 insertions(+), 8 deletions(-)
diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c
index b863539..1acdc88 100644
--- a/drivers/spi/ich.c
+++ b/drivers/spi/ich.c
@@ -123,7 +123,7 @@ static int ich_init_controller(struct udevice *dev,
sbase = (void *)sbase_addr;
debug("%s: sbase=%p\n", __func__, sbase);
- if (plat->ich_version == PCHV_7) {
+ if (plat->ich_version == ICHV_7) {
struct ich7_spi_regs *ich7_spi = sbase;
ich7_spi = (struct ich7_spi_regs *)sbase;
@@ -139,7 +139,7 @@ static int ich_init_controller(struct udevice *dev,
ctlr->bbar = offsetof(struct ich7_spi_regs, bbar);
ctlr->preop = offsetof(struct ich7_spi_regs, preop);
ctlr->base = ich7_spi;
- } else if (plat->ich_version == PCHV_9) {
+ } else if (plat->ich_version == ICHV_9) {
struct ich9_spi_regs *ich9_spi = sbase;
ctlr->ichspi_lock = readw(&ich9_spi->hsfs) & HSFS_FLOCKDN;
@@ -165,7 +165,7 @@ static int ich_init_controller(struct udevice *dev,
/* Work out the maximum speed we can support */
ctlr->max_speed = 20000000;
- if (plat->ich_version == PCHV_9 && ich9_can_do_33mhz(dev))
+ if (plat->ich_version == ICHV_9 && ich9_can_do_33mhz(dev))
ctlr->max_speed = 33000000;
debug("ICH SPI: Version ID %d detected at %p, speed %ld\n",
plat->ich_version, ctlr->base, ctlr->max_speed);
@@ -394,7 +394,7 @@ static int ich_spi_xfer(struct udevice *dev, unsigned int bitlen,
if (ret < 0)
return ret;
- if (plat->ich_version == PCHV_7)
+ if (plat->ich_version == ICHV_7)
ich_writew(ctlr, SPIS_CDS | SPIS_FCERR, ctlr->status);
else
ich_writeb(ctlr, SPIS_CDS | SPIS_FCERR, ctlr->status);
@@ -649,7 +649,7 @@ static int ich_spi_child_pre_probe(struct udevice *dev)
* ICH 7 SPI controller only supports array read command
* and byte program command for SST flash
*/
- if (plat->ich_version == PCHV_7) {
+ if (plat->ich_version == ICHV_7) {
slave->mode_rx = SPI_RX_SLOW;
slave->mode = SPI_TX_BYTE;
}
@@ -665,12 +665,12 @@ static int ich_spi_ofdata_to_platdata(struct udevice *dev)
ret = fdt_node_check_compatible(gd->fdt_blob, dev->of_offset,
"intel,ich7-spi");
if (ret == 0) {
- plat->ich_version = PCHV_7;
+ plat->ich_version = ICHV_7;
} else {
ret = fdt_node_check_compatible(gd->fdt_blob, dev->of_offset,
"intel,ich9-spi");
if (ret == 0)
- plat->ich_version = PCHV_9;
+ plat->ich_version = ICHV_9;
}
return ret;
diff --git a/drivers/spi/ich.h b/drivers/spi/ich.h
index 6344e80..bd0a820 100644
--- a/drivers/spi/ich.h
+++ b/drivers/spi/ich.h
@@ -127,8 +127,13 @@ struct spi_trans {
#define SPI_OPCODE_WREN 0x06
#define SPI_OPCODE_FAST_READ 0x0b
+enum ich_version {
+ ICHV_7,
+ ICHV_9,
+};
+
struct ich_spi_platdata {
- enum pch_version ich_version; /* Controller version, 7 or 9 */
+ enum ich_version ich_version; /* Controller version, 7 or 9 */
};
struct ich_spi_priv {
--
1.8.2.1
More information about the U-Boot
mailing list